On the origin of compressional intraplate stresses in South America

Intraplate stresses in middle South America are not negligible. We report thrust-faulting mechanisms for five intraplate earthquakes, which indicate a dominant horizontal deviatoric compressional stress oriented in a NW-SE direction. We conclude that this state of stress is due to forces connected with spreading on the Mid Atlantic Ridge and resistive forces exerted by the Caribbean plate to the north and the Nazca plate to the west. The existence and nature of the resistive forces is inferred from earthquake mechanisms and geological evidence presented in other studies. All the available intraplate stress data for Nazca and South America indicate that both plates are under deviatoric compression generated at spreading centers. The absence of tensional earthquake focal mechanisms, particularly in the Nazca plate near the trench, suggests that the forces associated with the gravitational sinking of subducted lithosphere are locally compensated. We present a simple numerical calculation of a non-subducting plate to show how the compressional deviatoric stresses in middle South America can be used to estimate an upper bound of about 10²¹ P for the viscosity of the mantle.     

Impaktite von Köfels,Tirol

Zusammenfassung Die glasführenden Gesteine von Köfels, Tirol, wurden petrologisch untersucht. Sowohl Elektronenstrahl-Mikrosondenanalysen der Phasen als auch chemische Pauschalanalysen einiger Gesteine werden angegeben.Das Vorhandensein von Cr- und Si-führendem Nickeleisen, Lechatelierit, Kalifeldspatglas, Fe-reichen Gläsern, Olivin sowie die kräftigen Inhomogenitäten in der Glasphase sind nur durch eine Impakt-Entstehung dieser Gesteine erklärbar.

---

Impactites from Koefels, Tyrol, Austria

Summary The glass-bearing rocks from Koefels, Tyrol, have been investigated petrologically. Electron-microprobe Analyses of the phases and chemical bulk analyses of some rocks are presented.The presence of Cr- and Si-bearing nickel-iron, lechatelierite, potassium-feldspar-glass, olivine, as well as the pronounced inhomogenities of the glasses strongly suggest an impact origin of these rocks.

---

---

Mit 7 Abbildungen     

Solar-Blind Diamond Detectors for Lyra, the Solar VUV Radiometer on Board Proba II

Fabrication, packaging and experimental results on the calibration of metal-semiconductor-metal (MSM) photodetectors made on diamond are reported. LYRA (Lyman- RAdiometer onboard PROBA-2) will use diamond detectors for the first time in space for a solar physics instrument. A set of measurement campaigns was designed to obtain the XUV-to-VIS responsivity of the devices and other characterizations. The measurements of responsivity in EUV and VUV spectral ranges (40–240 nm) have been carried out by the Physkalisch-Technische Bundesanstalt (PTB) in Germany at the electron storage ring BESSY II. The longer wavelength range from 210 to 1127 nm was measured with monochromatic light by using a Xe-lamp at IMO-IMOMEC. The diamond detectors exhibit a photoresponse which lie in the 35–65 mA/W range at 200 nm (corresponding to an external quantum efficiency of 20–40%) and indicate a visible rejection ratio (200–500 nm) higher than four orders of magnitude.     

Greenhouse Gas Dynamics of an Increased Use of Wood in Buildings in Switzerland

Long-living wood products contribute to the mitigation of climate change in many ways. They act as a carbon pool during their service life, as they withdraw CO₂ from its natural cycle. After their service life, they can stitute for fossil fuels if they are incinerated in adequate furnaces. Furthermore, wood products can stitute for more energy-intense products made of ‘conventional’ materials. This paper quantifies the stitution and pool effects of an increased use of wood in the building sector in Switzerland for the years 2000–2130. Life cycle data on greenhouse gas (GHG) emissions of 12 wood products and their stitutes are used as proxies for relevant building products; this data is linked to the forecasted wood flows for each group of building products in a cohort-model. For the political assessment, GHG effects occurring abroad and in Switzerland are distinguished. The results show that the pool effect of an increased use of long-living wood products is of minor importance, whereas the energetic and material stitution effects are much more relevant, especially on a long-term. For construction products, the Swiss share of the GHG effect related to the material stitution is relatively high, as mainly nationally produced materials are stituted for. For interior products, the Swiss share of the GHG effect related to the material stitution is rather small because mainly imports are stituted for. The results must be considered as rough estimates. Nonetheless, these calculations show that an increased use of wood in the building sector is a valid and valuable option for the mitigation of greenhouse gas emissions and for reaching GHG emission targets in a mid- to long-term. Still, the pool and stitution capacity of an increased use of wood is relatively small compared to the overall GHG emissions of Switzerland.     

A Fully Depleted pn-Junction CCD for Infrared-, UV- and X- ray detection

This paper describes the performance of the Fully Depleted pn-junction CCD (pn-CCD) system, developed for ESA's XMM-satellite mission for soft x-ray imaging and spectroscopy in the single photon counting mode in the 100 eV to 10 keV photon range. The 58 mm x 60 mm large pn-CCD array, designed and fabricated at the Semiconductor Lab (Halbleiterlabor) of the Max-Planck-Institut, uses pn-junctions for registers and as backside structure. This concept naturally enables full depletion of the detector volume independent of the silicon wafer's resistivity and thickness, and as such make it an efficient detector for the x-ray region and the infrared. For high detection efficiency in the soft x-ray region and UV, an ultrathin pn-CCD backside deadlayer has been realized. Each pn-CCD-channel is equipped with its own on-chip JFET amplifier which, in combination with the CAMEX-amplifier and multiplexing chip, facilitates parallel readout and fast data rate: the cooled pn-CCD system can be read out at a data rate up to 3 MHz with an electronic noise floor of ENC < 5 e-.     

Orthogneisses of the Spessart crystalline complex,Northwest Bavaria: Indicators of the geotectonic environment?

The orthogneisses of the Spessart crystalline complex are derived from a granitic to granodioritic magma of S-type character which must have formed by anatexis of continental crust. It intruded into a relatively shallow crustal level, 410–420 Ma ago, at the Silurian. Trace element characteristics are consistent with a post-collision geotectonic environment testifying to extensional tectonics at the end of the Caledonian era.

---

Zusammenfassung Die Orthogneise des Spessartkristallins lassen sich von einem granitischen bis granodioritischen Magma von S-Typ-Charakter ableiten, das durch Anatexis kontinentaler Kruste entstanden sein mu\ und in ein relativ oberflächennahes Krustenniveau intrudierte. Die Platznahme erfolgte vor 410–420 Ma, d. h. im Silur. Die Spurenelement-Muster der Orthogneise entsprechen denen von Post-Kollisions-Granitoiden, was als Hinweis auf eine Phase der Dehnungstektonik am Ende der kaledonischen ära bewertet werden kann.

---

Résumé Les orthogneiss du Spessart sont dérivés d'un magma granitique à granodioritique de type S qui doit s'Être formé par anatexie de la croûte continentale. Ce magma a été intrudé dans un niveau peu profond de la croûte il y a 410–420 Ma c'est-à-dire au Silurien. La distribution des éléments en traces est en accord avec celle des granitoÏdes formés dans un contexte géodynamique de post-collision. Cette observation est en faveur d'une phase d'extension tectonique à la fin du cycle calédonien.

---

, — Wojcieszów-Kalke. , — . . , , , , .

     

Proterozoic deformation of the East Saharan Craton in Southeast Libya, South Egypt and North Sudan

The basement areas in Southeast Libya, South Egypt and North Sudan, west of the Nile, between Gebel Uweinat and the Bayuda Desert, are part of an approximately 1000-km-wide, complexly folded, polymetamorphic zone with a regional N-NNE-NE-ENE trend of foliation and fold axis. Since this belt extends southwestward into the area of Zalingei in the southern Darfur block (West Sudan), it is named the Northern Zalingei fold zone. Sr and Nd isotopic studies suggest that this zone is older than Pan-African and further indicate that, apart from Archean rocks in the Gebel Uweinat area, this belt is of Early-Middle Proterozoic age. An Early-Middle Proterozoic three-stage deformational and anatectic event established the present-day fold and fault geometry in the western parts of this zone in the Gebel Uweinat—Gebel Kamil area. The Pan-African tectono-thermal episode was most effective in the eastern part of the belt, near the boundary with the Nubian Shield volcano-sedimentary-ophiolite-granitoid assemblages. It caused migmatization, granite emplacement, mylonitization and large-scale wrench faulting which was related to Late Proterozoic accretionary and collisional events of the Arabian-Nubian Shield with the margin of the East Saharan Craton.     

Upper-atmosphere zonal winds: Variation with height and local time

The average rotation rate of the upper atmosphere can be found by analysis of the changes in the orbital inclinations of satellites, and results previously obtained have indicated that the atmospheric rotation rate appreciably exceeds the Earth's rotation rate at heights between 200 and 400 km.We have examined all such results previously published in the light of current standards of accuracy: some are accepted, some revised, and some rejected as inadequate in accuracy. We also analyse a number of fresh orbits and, adding these to the accepted and revised previous results, we derive the variation of zonal wind speed with height and local time. The rotation rate (rev/day) averaged over all local times increases from near 1.0 at 150 km height to 1.3 near 350 km (corresponding to an average west-to-east wind of 120 m/s), and then decreases to 1.0 at 400 km and probably to about 0.8 at greater heights. The maximum west-to-east winds occur in the evening hours, 18–24 h local time: these evening winds increase to a maximum of about 150 m/s at heights near 350 km and decline to near zero around 600 km. In the morning, 4–12 h local time, the winds are east to west, with speeds of 50–100 m/s above 200 km. We also tentatively conclude that, at heights above 350 km, the average rotation rate is greater in equatorial latitudes (0–25°) than at higher latitudes.