Effects of an Artificial Breakwater on the Distributions of Planktonic Microbial Communities

The summer distributions of planktonic microbial communities (heterotrophic and phtosynthetic bacteria, phtosynthetic and heterotrophic nanoflagellates, ciliate plankton, and microphytoplankton) were compared between inner and outer areas of Lake Sihwa, divided by an artificial breakwater, located on the western coast of Korea, in September 2003. The semienclosed, inner area was characterized by hyposaline surface water (<17 psu), and by low concentrations of dissolved oxygen (avg. 0.4 mg L¹) and high concentrations of inorganic nutrients (nitrogenous nutrients >36 μM, phosphate <4 μM) in the bottom layer. Higher densities of heterotrophic bacteria and nanoflagellates also occurred in the inner area than did in the outer area, while microphytoplankton (mainly diatoms) occurred abundantly in the outer area. A tiny tintinnid ciliate, Tintinnopsis nana, bloomed into more than 10⁶ cells L¹ at the surface layer of the inner area, while its abundance was much lower (10³-10⁴ cells L¹) in the outer area of the breakwater. Ciliate abundance was highly correlated with heterotrophic bacteria (r = 0.886, p < 0.001) and heterotrophic flagellates (r = 0.962, p < 0.001), indicating that rich food availability may have led to theT. nana bloom. These results suggest that the breakwater causes the eutrophic environment in artificial lakes with limited flushing of enriched water and develops into abundant bacteria, nanoflagellates, and ciliates.     

High-resolution climate simulation of the last glacial maximum

The climate of the last glacial maximum (LGM) is simulated with a high-resolution atmospheric general circulation model, the NCAR CCM3 at spectral truncation of T170, corresponding to a grid cell size of roughly 75 km. The purpose of the study is to assess whether there are significant benefits from the higher resolution simulation compared to the lower resolution simulation associated with the role of topography. The LGM simulations were forced with modified CLIMAP sea ice distribution and sea surface temperatures (SST) reduced by 1°C, ice sheet topography, reduced CO₂, and 21,000 BP orbital parameters. The high-resolution model captures modern climate reasonably well, in particular the distribution of heavy precipitation in the tropical Pacific. For the ice age case, surface temperature simulated by the high-resolution model agrees better with those of proxy estimates than does the low-resolution model. Despite the fact that tropical SSTs were only 2.1°C less than the control run, there are many lowland tropical land areas 4–6°C colder than present. Comparison of T170 model results with the best constrained proxy temperature estimates (noble gas concentrations in groundwater) now yield no significant differences between model and observations. There are also significant upland temperature changes in the best resolved tropical mountain belt (the Andes). We provisionally attribute this result in part as resulting from decreased lateral mixing between ocean and land in a model with more model grid cells. A longstanding model-data discrepancy therefore appears to be resolved without invoking any unusual model physics. The response of the Asian summer monsoon can also be more clearly linked to local geography in the high-resolution model than in the low-resolution model; this distinction should enable more confident validation of climate proxy data with the high-resolution model. Elsewhere, an inferred salinity increase in the subtropical North Atlantic may have significant implications for ocean circulation changes during the LGM. A large part of the Amazon and Congo Basins are simulated to be substantially drier in the ice age—consistent with many (but not all) paleo data. These results suggest that there are considerable benefits derived from high-resolution model regarding regional climate responses, and that observationalists can now compare their results with models that resolve geography at a resolution comparable to that which the proxy data represent.     

A semi-continuous measurement of gaseous ammonia and particulate ammonium concentrations in PM<Subscript>2.5</Subscript> in the ambient atmosphere

Ammonia has a short residence time in the atmosphere and rapidly neutralizes acid gases that occur near its source, requiring a rapid measurement system for ammonia and particulate ammonium concentrations to better understand their sources, temporal variation of ammonia emissions, and the formation of secondary ammonium aerosols. A semi-continuous measurement system, consisting of a diffusion scrubber, a particle growth chamber, an air-liquid separator, and a fluorescent detector, was developed to determine both gaseous ammonia (NH₃) and particulate ammonium (NH ₄ ⁺ ) in PM_2.5 in the ambient atmosphere of Gwangju, South Korea, during the months of March, April, July, and September of 2007. During the sampling periods, the average concentrations of ammonia and ammonium were found to be 2.33?±?1.29 μg/m³ and 1.89?±?0.99 μg/m³, respectively. Although the average gaseous ammonia concentration was highest in March, the particulate ammonium concentration was higher during the warmer season, reaching 2.08?±?1.07 μg/m³ and 2.32?±?0.94 μg/m³ in April and July, respectively, while only 1.68?±?0.61 μg/m³ in March and 1.24?±?0.99 μg/m³ in September. It is proposed that the higher availability of acid species during the warmer months produced a significant amount of particulate ammonium sulfate. Diurnal fluctuation of ammonia and ammonium during the warmer months showed that their peak time occurred at approximately 10:00 am. Both ammonia and ammonium concentrations were better correlated during the warmer months than during the cooler months. Further, the data suggest that the ammonia and ammonium were measured under well dispersed conditions, and multiple sources contributed to the ammonia at the sampling site.     

Source identification of PM2.5 particles measured in Gwangju, Korea

The UNMIX and Chemical Mass Balance (CMB) receptor models were used to investigate sources of PM_2.5 aerosols measured between March 2001 and February 2002 in Gwangju, Korea. Measurements of PM_2.5 particles were used for the analysis of carbonaceous species (organic (OC) and elemental carbon (EC)) using the thermal manganese dioxide oxidation (TMO) method, the investigation of seven ionic species using ion chromatography (IC), and the analysis of twenty-four metal species using Inductively Coupled Plasma (ICP)-Atomic Emission Spectrometry (AES)/ICP-Mass Spectrometry (MS). According to annual average PM_2.5 source apportionment results obtained from CMB calculations, diesel vehicle exhaust was the major contributor, accounting for 33.4% of the measured PM_2.5 mass (21.5 μg m^− 3), followed by secondary sulfate (14.6%), meat cooking (11.7%), secondary organic carbon (8.9%), secondary nitrate (7.6%), urban dust (5.5%), Asian dust (4.4%), biomass burning (2.8%), sea salt (2.7%), residual oil combustion (2.6%), gasoline vehicle exhaust (1.9%), automobile lead (0.5%), and components of unknown sources (3.4%). Seven PM_2.5 sources including diesel vehicles (29.6%), secondary sulfate (17.4%), biomass burning (14.7%), secondary nitrate (12.6%), gasoline vehicles (12.4%), secondary organic carbon (5.8%) and Asian dust (1.9%) were identified from the UNMIX analysis. The annual average source apportionment results from the two models are compared and the reasons for differences are qualitatively discussed for better understanding of PM_2.5 sources.Additionally, the impact of air mass pathways on the PM_2.5 mass was evaluated using air mass trajectories calculated with the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) backward trajectory model. Source contributions to PM_2.5 collected during the four air mass patterns and two event periods were calculated with the CMB model and analyzed. Results of source apportionment revealed that the contribution of diesel traffic exhaust (47.0%) in stagnant conditions (S) was much higher than the average contribution of diesel vehicle exhaust (33.4%) during the sampling period. During Asian dust (AD) periods when the air mass passed over the Korean peninsula, Asian dust and secondary organic carbon accounted for 25.2 and 23.0% of the PM_2.5 mass, respectively, whereas Asian dust contributed only 10.8% to the PM_2.5 mass during the AD event when the air mass passed over the Yellow Sea. The contribution of biomass burning to the PM_2.5 mass during the biomass burning (BB) event equaled 63.8%.     

Evidence for significant clockwise rotations of the Korean Peninsula during Cretaceous

In an effort to evaluate the Cretaceous magnetostratigraphy for the Korean Peninsula and to establish the tectonic coherence of its various elements, we collected paleomagnetic data from 121 samples from 20 sites within the Chilgok Formation (108.3–109.9 Ma) in the Gyeongsang Basin. Together with previously published data, we evaluate the results from a total of 163 sites in the basin.We combine our age model with results from recent stratigraphic, paleomagnetic and radiometric geochemical studies. In this study, we found that two distinct declination shifts decrease with younging direction, indicating two clockwise rotational events of the Korean Peninsula with respect to the Eurasia continent. The earlier event took place during 130–100 Ma (Phase I, newly termed “Goguryeo Disturbance”) and a later one during 80–50 Ma (Phase III, belonging to “Bulguksa Orogeny”). The mean rotation rate in the interval from 115.2 to 103.8 Ma (Phase I) is about 0.74°/Ma, while the rate from 90.9 to 79.8 Ma (Phase II) is 0.19°/Ma. Based on paleolatitude change during Phase I, we infer that the Korean Peninsula (eastern part of the Sino-Korea Block) migrated southward about 300 km after the complete amalgamation of the Sino-Korea Block into the Eurasian continent resulting in N–S compression within the Korean peninsula and Manchuria. Large-scale strike-slip faults (e.g., Tan-Lu Fault, Okcheon Boundary Fault) were probably rejuvenated in the Sino-Korea Block during Phase I.     

Small-scale marine fisheries policy in Vietnam

Vietnam's marine fisheries are considered to be small scale and are concentrated in coastal near-shore waters. This has resulted in heavy pressure on near-shore fisheries resources. Near-shore fisheries are considered by fishers and the government to be over-exploited, causing hardship for many coastal communities. This paper reviews and analyzes changes in policy towards small-scale fisheries in Vietnam over the last two decades. The primary issues facing the small-scale fisheries in Vietnam are to restructure the near-shore fisheries and to address over-capacity. Recommended actions include improved fisheries statistics, resources for provincial fisheries staff, and a coordinated and integrated approach involving a mixed strategy of resource management; resource restoration; economic and community development; and new governance arrangements.     

Evolution of the eastern margin of Korea: Constraints on the opening of the East Sea (Japan Sea)

We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the eastern Korean margin that led to the separation of the southwestern Japan Arc. The eastern Korean margin is rimmed by fundamental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. In the northern part, rifting occurred in the Korea Plateau that is a continental fragment extended and partially segmented from the Korean Peninsula. Two distinguished rift basins (Onnuri and Bandal Basins) in the Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and considerably symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. In contrast, the southern margin is engraved along its length with a single narrow rift basin (Hupo Basin) that is an elongated asymmetric half-graben. Analysis of rift fault patterns suggests that rifting at the Korean margin was primarily controlled by normal faulting resulting from extension rather than strike-slip deformation. Two extension directions for rifting are recognized: the Onnuri and Hupo Basins were rifted in the east-west direction; the Bandal Basin in the east–west and northwest–southeast directions, suggesting two rift stages. We interpret that the east–west direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated southeastward repeatedly from the Japan Basin toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed the direction to the south, resulting in east–west extension to create the rift basins at the Korean margin. The northwest–southeast direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the Korea Plateau; after breakup the southwestern Japan Arc separated in the southeast direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the northwest direction. No significant volcanism was involved in initial rifting. In contrast, the inception of sea floor spreading documents a pronounced volcanic phase which appears to reflect asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin, although it is in a back-arc setting, can be explained by the processes occurring at the passive continental margin with magmatism influenced by asthenospheric upwelling.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

Anomalous increase in the foF2 critical frequency prior to the Spanish earthquake of May 11, 2011

A study of variations in the critical frequency of the F2 layer (foF2) prior to a shallow-focus eartquake with a magnitude M = 5.1 which occurred in Spain on May 11, 2011, is carried out. The obtained results show that a positive disturbance in the foF2 value was observed at the ionospheric Del’ebre station, which is the closest to the earthquake epicenter. At the same time, no disturbances in foF2 are revealed at ionospheric stations located at a greater distance from the epicenter. This fact makes it possible to conclude that the positive disturbance in the F2 layer observed at the Del’ebre station could have a sesmogenic nature.     

Assessment of ecological flow rate by flow duration and environmental management class in the Geum River, Korea

This study attempted to analyze flow duration in a basin using a method to estimate environmental flow developed by the International Water Management Institute, and simulate the effects of runoff characteristics unique to a river and flow variability due to basin developments on aquatic ecosystems. To do so, KModSim, a simulation model for basin-wide water distribution, was used to assess flow duration in the Geum River basin, one of the four major river basins in Korea, by environmental management class (EMC). Flow duration curves by EMC at Sutong and Gongju sites were derived on the basis of natural flow in the Geum River basin. As a result, they were found to be consistent with the results of previous studies. Time series of mean monthly flow data by EMC were plotted together with those of simulated flow data by reservoir operation scenario; Sutong and Gongju points both showed flow behaviors corresponding almost to “A” in EMC. In addition, the characteristics of habitats by species of fish were identified through monitoring fish habitat at the Sutong site, so that optimal ecological flow rate was estimated. For this purpose, relations between flow discharge and weighted usable area for Coreoleuciscus splendidus and Pseudopungtungia nigra were projected using physical habitat simulation system, and EMCs consistent with flow duration curves (estimated taking in-stream flow) were assessed. The results or findings reported in this study are expected to serve as basic data for making a plan to efficiently monitor and manage aquatic ecosystems in the Geum River basin.