四川盆地东部垫江凹陷三叠系嘉陵江组岩盐氯同位素特征与成钾指标研究

垫江凹陷位于四川盆地东部,是四川盆地三叠纪时期重要的成盐凹陷之一,但当时古卤水是否达到钾盐沉积阶段,是否具备形成海相钾盐的良好条件,一直存在争议。本文通过对垫江凹陷长平3井、高探1井和ZK001井嘉陵江组岩盐样品进行化学成分分析,以及对长平3井典型岩盐样品进行氯同位素分析来判断古卤水沉积阶段和成钾条件。结果发现垫江凹陷三叠系嘉陵江组岩盐δ37 Cl值均为负值,均小于-0.32‰,最低达到-1.18‰,绝大部分岩盐样品溴氯系数大于0.31,有很大一部分样品溴氯系数超过0.45,进一步表明垫江凹陷在嘉陵江期古卤水浓缩已达到钾石盐析出阶段,与岩盐包裹体成分分析结果一致。综合气候-物源-构造因素,认为垫江凹陷三叠纪嘉陵江期气候条件炎热,物质来源丰富,存在次级凹陷,古构造条件优越,具备良好的成钾潜力。     

Middle Jurassic–Early Cretaceous tectonic evolution of the Bayanhushuo area,southern Great Xing’an Range,NE China: constraints from zircon U–Pb geochronological and geochemical data of volcanic and subvolcanic rocks

This study presents new zircon U–Pb geochronology, geochemistry, and zircon Hf isotopic data of volcanic and subvolcanic rocks that crop out in the Bayanhushuo area of the southern Great Xing’an Range (GXR) of NE China. These data provide insights into the tectonic evolution of this area during the late Mesozoic and constrain the evolution of the Mongol–Okhotsk Ocean. Combining these new ages with previously published data suggests that the late Mesozoic volcanism occurred in two distinct episodes: Early–Middle Jurassic (176–173 Ma) and Late Jurassic–Early Cretaceous (151–138 Ma). The Early–Middle Jurassic dacite porphyry belongs to high-K calc-alkaline series, showing the features of I-type igneous rock. This unit has zircon ε_Hf(t) values from +4.06 to +11.62 that yield two-stage model ages (T_DM2) from 959 to 481 Ma. The geochemistry of the dacite porphyry is indicative of formation in a volcanic arc tectonic setting, and it is derived from a primary magma generated by the partial melting of juvenile mafic crustal material. The Late Jurassic–Early Cretaceous volcanic rocks belong to high-K calc-alkaline or shoshonite series and have A₂-type affinities. These volcanics have ε_Hf(t) and T_DM2 values from +5.00 to +8.93 and from 879 to 627 Ma, respectively. The geochemistry of these Late Jurassic–Early Cretaceous volcanic rocks is indicative of formation in a post-collisional extensional environment, and they formed from primary magmas generated by the partial melting of juvenile mafic lower crust. The discovery of late Mesozoic volcanic and subvolcanic rocks within the southern GXR indicates that this region was in volcanic arc and extensional tectonic settings during the Early–Middle Jurassic and the Late Jurassic–Early Cretaceous, respectively. This indicates that the Mongol–Okhotsk oceanic plate was undergoing subduction during the Early–Middle Jurassic, and this ocean adjacent to the GXR may have closed by the Late Middle Jurassic–Early Late Jurassic.     

Zircon U-Pb Geochronology,Geochemistry and Petrogenesis of Early Cretaceous A-type Granites in the Mikengshan Area,Southern Jiangxi ProvinceEI北大核心CSCD

In the Mikengshan-Yanbei area, a special region for the tin mineralization in South China, there are some Yanshanian granites and porphyries and associated porphyry tin deposits (e.g., Yanbei). Although the tin mineralization is closely associated with the granitoids magmatism, the age and petrogenesis of the granites remain controversial. The Mikengshan pluton, which intrudes into the rhyolitic tuff and pyroclastic rocks of the Upper Jurassic Jilongzhang Formation, is the largest one in Mikengshan-Yanbei area and mainly consists of K-feldspar bearing granites. In this study, we report new age and geochemical data for the Mikengshan K-feldspar bearing granites. LA-ICP-MS zircon U-Pb age dating shows that they were generated in the Early Cretaceous (~138 Ma). They have high SiO2 (74.42% to 76.69%), low Al2O3 (12.39% to 13.49%) and Mg# (11 to 19), and negative Eu, Sr and Ba anomalies, and are rich in potassium (most K2O/Na2O=1.37 to 1.94) and high field strength elements (HFSEs), and are weakly peraluminous (A/CNK=1.03 to 1.1) with high 10000×Ga/Al ratios (3.46 to 4.96) and slightly high zircon saturation temperatures (807 ℃ to 817 ℃), showing the characteristics of the typical A-type granites. Moreover, they have high Rb contents 842×10-6 to 1295×10-6, Rb/Sr (90 to 255) ratios and show rare earth elements (REE) tetrad effect, which are similar to those of high fractionated granites. Thus, we suggested that the Mikengshan K-feldspar bearing granites are high fractionated and aluminous A-type granite. Their slightly high εNd(t) values (-3.4 to -4.6) indicate that the mantle components should have played a role during their formation. Taking into account regional igneous rocks and tectonic setting data, we suggest that the Mikengshan K-bearing granites were formed in an extensional setting, which was probably related to the roll-back of the subducted Paleo-Pacific plate. © 2018, Science Press. All right reserved.     

The nonlinear time lag multivariable grey prediction model based on interval grey numbers and its application

Natural Hazards - The linear relationship of the original grey prediction model is too single, and the original grey prediction model does not consider the time delay of the effect of the current...     

中国晚泥盆世至早三叠世楔叶类植物多样性研究*

化石类群的分类单元多样性和形态多样性变化是生物宏演化的2个基本方面,而以往的研究对于后者的关注较少。晚古生代的楔叶类植物易于识别,化石记录丰富,但针对这一类群多样性演化的研究还较为缺乏。基于华北板块、华南板块晚泥盆世至早三叠世楔叶类植物属、种以及叶片形态编码数据库,对楔叶类植物宏演化历程进行详细研究。中国(华北板块和华南板块)楔叶类植物的属、种丰富度在晚古生代呈现出不稳定的持续增长,表现为晚泥盆世的初始兴盛、早石炭世杜内期至早二叠世萨克马尔期的缓慢上升、早二叠世萨克马尔期至晚二叠世吴家坪期的快速上升;晚二叠世长兴期,总体的属种多样性骤减;每百万年属种多样性在二叠纪—三叠纪之交亦有明显降低。华南板块楔叶类植物的属种多样性总体上小于华北板块,达到峰值的时间为卡匹敦期—吴家坪期,而华北楔叶类植物的属级多样性在空谷期—沃德期达到峰值。中国楔叶类植物叶片的形态多样性的剧烈变化与属种丰富度并不同步,表现为法门期至韦宪期较小,在宾夕法尼亚亚纪达到峰值,随后稍微下降并在二叠纪的大部分时段保持平稳。在晚古生代的叶片形态演化过程中,楔叶类植物的叶面积由小变大、叶片由深裂至不裂、叶尖形状由分裂变为圆形或钝圆、叶轮中的叶从大小相等到大小不等并出现叶镶嵌,这可能与当时植物群落中林下层光照强度的变化有关。     

2019年甘肃夏河Ms5.7地震前后重力场异常特征分析

地震的孕育发生过程伴随着构造运动、物质迁移和密度变化,将引起地球重力场变化,流动重力重复观测有可能捕捉到与地震孕育有关的前兆信息,从而为中短期地震预测提供重要依据.基于南北地震带2017-2020年的流动重力观测资料,获得了甘东南地区的区域重力场时空变化图像,分析了区域重力场动态变化及其与2019年甘肃夏河Ms 5.7地震发生的关系.结果 表明:①震前测区重力异常变化等值线与临潭—宕昌断裂走向基本一致,且在震中附近出现四象限分布特征,夏河Ms5.7地震发生在重力高梯度带和四象限中心附近;②地震前后区域重力场经历了"区域性重力异常—四象限分布特征—反向变化发震"的时空演化过程;③九寨沟地震的发生可能引起附近断层区域应力场的调整,从而加速了夏河地震的发生;④区域重力场时变与临潭—宕昌断裂在空间上有较好的对应,综合分析可认为该次地震的发震断裂为临潭—宕昌断裂.     

固体潮观测数据预处理中的常用方法及计算机实现

从地震台站产出的原始地形变前兆数据出发,提出实际操作性较强的预处理方法,从已编制好的软件中给出处理实例,从而提高地震台站观测人员的科研能力,填补资料预处理方面的某些空白,对于地震台站人员集观测、科研于一体有着十分重要的意义。从95-01-02项目厦门地震台前兆数据预处理的实践表明:这些方法取得了明显的实效,直到今天仍然具有很大的使用价值。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

基于RT-Thread的波浪滑翔器控制系统设计与实现

波浪滑翔器是一种新型海洋无人自主航行器,拥有无污染、能耗低、续航时间长、航程远、生存能力强等诸多特点,已逐步成为国内外研究的热点。控制系统作为波浪滑翔器的重要组成部分之一,它的稳定与准确性直接影响着波浪滑翔器的航行性能尤其是走航和定点的控位精度。介绍了一种基于 RT-Thread 实时操作系统的波浪滑翔器控制系统设计,通过多次海上长时间连续试验表明,基于 RT-Thread 的波浪滑翔器控制系统具有良好的准确性和可靠性。     

BDS卫星钟差半参数平差模型异常数据探测与处理

针对北斗卫星钟差数据中出现钟跳、粗差等异常数据频次较高的问题,将半参数平差模型引入BDS的钟差数据的处理过程中。首先,在考虑系统误差的同时,改进了常用的钟差模型;其次,综合考虑异常数据和系统误差,利用补偿最小二乘原理和极值求解方法,详细推导了分离异常数据前后参数和非参数估计值与相应观测值改正数的关系表达式,实现了异常数据的定值、参数求解和系统误差分离。在此基础上,引入Cook距离,给出了利用参数分量和非参数分量的Cook距离及混合Cook距离,去判断异常值的位置,并给出了一些参数的选取方法及相应的处理措施,实现了卫星钟差异常数据的定位和定值以及部分系统误差的分离。最后,采用武汉大学GNSS中心提供的采样间隔为5 min的北斗卫星精密钟差数据,将本文方法与常用方法进行了试验对比。试验结果表明,本文方法能够有效地识别并处理卫星钟差数据中的异常值,有效克服了基于经验阈值钟差异常数据探测方法的不足,且该方法对于量级较小的异常钟差数据也有很好的探测效果,一定程度丰富了现有的BDS钟差数据质量控制方法。