Caractérisation de l'effluent de vidange d'un étang de pisciculture extensive

Résumé Afin d'évaluer l'impact potentiel de la vidange, les flux de nutriments et de matières sont quantifiés lors du remplissage et de la vidange d'un étang construit en dérivation, à l'aval d'une chaîne d'étangs. La cinétique de vidange a été établie à l'aide d'un modèle numérique de terrain restituant la surface topographique de l'étang. Les matières en suspension et les principaux nutriments ont été régulièrement quantifiés. La qualité hydrobiologique du cours d'eau récepteur a été contrôlée pendant et après la vidange. L'étang a exporté 8.5 tonnes de matières en suspension et des quantités de nutriments relativement élevées. Nos résultats confirment l'existence de deux phases critiques, ne concernant cependant qu'un très faible volume d'effluent. Compte tenu des capacités élevées de sédimentation des matières en suspension, la courte durée d'exposition associée à un linéaire de fossés suffisant pourrait limiter l'impact de ces matières rejetées.

Citation Vallod, D. & Sarrazin, B. (2010) Caractérisation de l'effluent de vidange d'un étang de pisciculture extensive. Hydrol. Sci. J. 55(3), 394–402.     

Efficiency of policy instruments for CCS deployment

Policy instruments for carbon capture and storage (CCS) technology investment during the learning phase are analysed and compared. The focus is on specific barriers to investment in learning during early commercial deployment. Imperfections in the carbon price signal and market failures from barriers indicate a need for support during the learning investment phase and the initial roll out of CCS in electricity generation. Different ways for CCS technology to cross the so-called investment ‘death valley’ are analysed and compared: a command and control instrument (CCS mandate), investment support (grant, tax credit, loan guarantee, subsidy by trust fund) and production subsidies (guaranteed carbon price, feed-in price, etc.). Three criteria are used in this comparison: effectiveness, static efficiency and dynamic efficiency. Policy instruments need to be adapted to the technological and commercial maturity of the CCS system. Mandate policies require handling with much care, and subsidization mechanisms must be designed to be market-oriented.     

Ecological Risk Assessment for seabird interactions in Western and Central Pacific longline fisheries

The risk of seabird–fishery interactions in the Western and Central Pacific Ocean (WCPO) was examined by analysing the overlap of seabird distributions with tuna and swordfish pelagic longline fisheries managed by the Western and Central Pacific Fisheries Commission (WCPFC) and its constituent members. The study used spatially-explicit Productivity–Susceptibility Analysis (PSA). Key data inputs were species productivity, fishing effort, likelihood of capture and species density by region. The outputs tailored results to the needs of fisheries- and wildlife-managers, indicating areas of greatest risk of species interactions, species of greatest concern for population impacts, and the flags or fisheries most likely to contribute to the risk. Large albatross species were found to be most likely to suffer population effects when exposed to longline fishing activity, followed by the larger petrels from the genuses Procellaria, Macronectes and Pterodroma. A mixture of coastal states with nesting seabird populations in their Exclusive Economic Zones (New Zealand, Australia and United States of America), distant water fishing nations (Japan, Taiwan) and flags of convenience (Vanuatu) contributed 90% of the risk to seabird populations. Recommendations include enhancing the level of fisheries observer monitoring in areas indicated as high to medium risk for seabird interactions, and consideration of spatial management tools, such as more intensive or more stringent seabird bycatch mitigation requirements in high- to medium-risk areas. The methods used, and similar studies conducted in the Atlantic Ocean could lead to improved targeting of monitoring resources, and greater specificity in the needs for seabird-mitigation measures. This will assist in reducing seabird mortality in longline fishing operations and with more effective use of resources for fishery managers in both domestic fisheries and RFMOs.     

Hydro-climatic analysis of mechanical breakups reconstructed from tree-rings, Necopastic watershed, northern Québec, Canada

We used a 54-year (1950–2003) ice scar chronology constructed from damaged trees to investigate relationships between large scale hydro-climatic conditions and mechanical breakup magnitude in the Necopastic River watershed (James Bay, northern Québec). Our objectives were: (1) to identify hydrologic and climatic variables that explain variations in mechanical breakup magnitude at the watershed scale, (2) to organize these variables in terms of importance and (3) to construct a predictive model for ice-floods in the Necopastic watershed. We used parametric correlation analysis to measure the degree of linear association between variables and classification trees (CT) coupled with a cross-validation approach to construct the predictive model and to organize variables according to their importance. In the Necopastic watershed, the type and magnitude of breakups are determined by an interaction between forces that maintain the ice cover in place and forces that tend to dislodge it. In contrast with lakes, early and rapidly rising floods, rather than abnormally high flood discharge, create conditions that favour intense mechanical breakups. Moreover, cold and snowy spring conditions during high positive Arctic Oscillation (AO) indices delay the thermal degradation of the ice cover and preserve its mechanical properties over longer time periods.     

Compositional dual mesh method for single phase flow in heterogeneous porous media—application to CO<Subscript>2</Subscript> storage

Numerical simulation of fluid flow coupled with chemical reactions has been an active field in the hydrogeology community and many formulations have been programmed into different software. In recent years, this subject has attracted increasing interest in the reservoir simulation community, partly for the application of chemical methods for hydrocarbon extraction but also for research on the geological sequestration of CO₂. In this paper, an extension to the concept of dual mesh for reactive transport modeling is presented. This approach involves two meshes, a low-resolution mesh to resolve the pressure equation and a high-resolution mesh to transport the species and to calculate the geochemical equilibrium. The main objective is to preserve the fine scale heterogeneities to reach a more accurate field behavior simulation than conventional approach which consist in performing simulations on a coarser mesh. The method is applied to a simulation of CO₂ storage in the SPE10 model that keep a high resolution of the heterogeneities.     

Solar-Blind Diamond Detectors for Lyra, the Solar VUV Radiometer on Board Proba II

Fabrication, packaging and experimental results on the calibration of metal-semiconductor-metal (MSM) photodetectors made on diamond are reported. LYRA (Lyman- RAdiometer onboard PROBA-2) will use diamond detectors for the first time in space for a solar physics instrument. A set of measurement campaigns was designed to obtain the XUV-to-VIS responsivity of the devices and other characterizations. The measurements of responsivity in EUV and VUV spectral ranges (40–240 nm) have been carried out by the Physkalisch-Technische Bundesanstalt (PTB) in Germany at the electron storage ring BESSY II. The longer wavelength range from 210 to 1127 nm was measured with monochromatic light by using a Xe-lamp at IMO-IMOMEC. The diamond detectors exhibit a photoresponse which lie in the 35–65 mA/W range at 200 nm (corresponding to an external quantum efficiency of 20–40%) and indicate a visible rejection ratio (200–500 nm) higher than four orders of magnitude.     

Thermal anomalies and paleoclimatic diffusive and advective phenomena: example of the Anglo-Paris Basin,northern France

This study is the first quantification of the combined impact of diffusive and advective paleoclimatic phenomena to explain the weak vertical thermal flux anomaly in the upper part of the Anglo-Paris intracratonic sedimentary basin in northern France. The aim of the research is to understand the mechanisms at the origin of the thermal flux anomaly at the level of the Meso-Cenozoic sediment pile. Based on a temperature profile representative of the basin, transient thermo-hydraulic simulations were performed along a representative vertical cross-section of about 400 km within the Lower Cretaceous multi-layer aquifer. Four paleoclimatic scenarios are the combination of two paleotemperature climatic forcings and two hydrodynamic regimes, one of them taking into account the interruption of the recharge linked to permafrost development. The simulation results clearly show the transient nature of the basin’s thermal regime. Then, for the reference well, the majority of the thermal flux anomaly can be explained by advective and paleoclimatic mechanisms with a decrease in geothermal flux simulated up to a little over 30 mW/m², depending on the scenarios. Decrease in heat flux because of basin-scale subsurface flows in the Lower Cretaceous is around 15 mW/m². There are several ways forward from this first simple model, including simulation of development of permafrost and also the integration of vertical flows in the basin by use of a three-dimensional model to better explain the data.     

Flow of ultra-hot orogens: A view from the Precambrian, clues for the Phanerozoic

This contribution emphasizes first-order structural and metamorphic characters of Precambrian accretionary orogens to understand the kinematics and thermomechanical state of the continental lithosphere in convergent settings involving massive juvenile magmatism. We define a new class of orogens, called ultra-hot orogens (UHO), in which the weakest type of lithosphere on Earth is deformed. UHO are characterized by (1) distributed shortening and orogen-scale flow combining vertical and horizontal longitudinal advection, under long-lasting convergence, (2) homogeneous thickening by combined downward movements of supracrustal units and three-dimensional mass redistribution in the viscous lower crust, and (3) steady-state, negligible topography and relief leveled by syn-shortening erosion and near-field sedimentation. The flow analysis of UHO provides clues to understanding crustal kinematics beneath high plateaus and suggests that the seismic reflectivity pattern of hot orogens is an image of the layering produced by lateral flow of the lower crust and associated syn-kinematic plutonism.In between the UHO and the modern cold orogens (CO), developed by shortening of lithosphere bearing a stiff upper mantle, two classes of orogens are defined. Hot orogens (HO, representative of Cordilleran and wide mature collisional belts) share flow pattern characteristics with UHO, but involve a less intense magmatic activity and develop high topographies driving their collapse. Mixed-hot orogens (MHO, representative of magmatic arcs and Proterozoic collisional belts) are orogens made of UHO-type juvenile crust and display CO-like structure and kinematics. This classification points to the fundamental link between the presence of a stiff lithospheric mantle and strain localization along major thrusts in convergent settings. A high Moho temperature (> 900 °C), implying thinning of the lithospheric mantle, enhances three-dimensional flow of the lithosphere in response to convergence. Overall, this classification of orogens emphasizes the space and time variability of uppermost mantle temperature in controlling plate interactions and continental growth.