Bioleaching potential of bacterial communities in historic mine waste areas

Microbial activity has the potential to alter all cultural heritage in mining and metallurgy, due to metal mobilization by leaching. This communication shows the consequences of the bioleaching ability of two natural enrichments on copper slag samples from a historic ore smelting site in Sangerhausen (Mansfeld, Südharz, Saxony-Anhalt, Germany). Enrichment cultures gained from mine drainage were dominated by either the iron and sulfur-oxidizing Acidithiobacillus ferrivorans, or by the iron-oxidizing Leptospirillum. During 35 days of bioleaching in media containing copper slag pulp, inoculated with these enrichments, the change in pH and solubilized metal concentrations of the systems were monitored. Both bacterial strains were completely different from each other in their pattern of pH variation and rates of metal solubilization. The maximum removal of Cu (1725 mg/l) and Zn (715 mg/l) from copper slag substrate was achieved with enrichment culture of A. ferrivorans SCUT-1. However, maximum Mn (207 mg/l), Pb (86 mg/l), and Ni (75 mg/l) removal was observed with enrichment culture of Leptospirillum strain YQP-1. Implications for metal mobilization along with alteration of artifacts from not only historic mining areas but also aspects of decontamination and remediation are discussed.     

Spatial and temporal dynamics of suspended particles and E. coli in a complex surface-water and karst groundwater system as a basis for an adapted water protection scheme,northern Vietnam

Karst aquifers in subtropical regions are characterized by high variability of water availability and quality due to changes associated with rainy and dry seasons. An additional challenge for water management is the combination of surface-water and karst groundwater systems since high spatiotemporal dynamics cause high variability of water quality. In these cases, adapted protection strategies are required. In this study, a protection approach for the catchment of a river-water diversion point in a rural area in northern Vietnam is developed. The variability of water quality was evaluated by rainy and dry season synoptic surveys of suspended particles and microbial contamination at 49 sites and time series at three sets of paired sites under constant hydraulic conditions. The anthropogenic land-use activities in the catchment were mapped to identify potential contamination sources and to highlight the challenging combination of surface-water and karst groundwater management. The analyzed data indicate differences in water quality between the dry and rainy seasons and a higher influence on water quality from land use than from hydrologic conditions. Furthermore, the results suggest a high risk of contamination resulting from residential areas, agriculture, and livestock farming, and reveal the necessity of implementation of appropriate measures such as restricted farming and the hook-up of buildings to municipal sewage disposal. Finally, the data show that water quality can be improved by adjusting water withdrawals by the time of day. The applied methods can be transferred to other surface-water and karst groundwater systems in similar subtropical environments.

     

Identification of stoichiometric iron-phosphorus colloids produced in a eutrophic lake

: Iron-rich colloids formed at the oxic-anoxic interface of a eutrophic lake (Lake Lugano; CH) were characterized by bulk chemical methods and analytical electron microscopy. Fractionation of raw waters showed that non-dissolved iron is particulate above the oxicline and mainly colloidal in the anoxic part of the hypolimnion, while non-dissolved ortho-phosphate is mostly colloidal through the water column. Because of these differences, filtration did not prove helpful for the determination of the role of iron-rich species in the scavenging of ortho-phosphate. On the other hand, analytical electron microscopy revealed that iron-rich nano-granules (ca. 50nm) are associated to the surface of bacterially produced fibrillar polysaccharides. Iron colloids in these complex entities contain important and constant amounts of phosphorus ([PO4]part:[Fe]part = 0.48 - 0.11, n = 1096 Fe-rich entities analyzed by electron microscopy), which suggests that phosphates are stoichiometrically incorporated into the hydrous iron oxide phase, with a tentative composition Fe2[OOH]1-x[(OH)3]x[PO4], during its genesis.     

Ferric/ferrous iron ratios in sodic amphiboles: Mössbauer analysis, stoichiometry-based model calculations and the high-resolution microanalytical flank method

Although the electron microprobe has become the standard microanalytical tool in modern geosciences, conventional electron microprobe analysis does not allow determination of the valence states of elements such as Fe. The correct classification of minerals and interpretation of reaction microfabrics and grain zonation require high-quality information on ferric/ferrous ratios on a scale of micrometers. The flank method developed by Höfer et?al. (1994, Eur J Mineral 6:407–418) has revived new interest in electron-induced X-ray-spectroscopy to resolve oxidation states in minerals with high spatial resolution. We have recharacterized well-documented sodic amphiboles of the glaucophane–ferroglaucophane–riebeckite–magnesioriebeckite series by electron probe microanalysis and combined the microanalytical data with ferric/ferrous ratios from Mössbauer spectroscopy, Li data from bulk ICP-AES analysis and H₂O data from bulk Karl–Fischer titration. The combination of microanalysis and high-quality analysis on the bulk materials results in a data set that allows comparison of model-based stoichiometric calculations and the calibration of the high-resolution flank method. The calibration obtained allows ferric/ferrous ratios to be determined within an error of ±5%. We have found it necessary to apply an empirical correction for absorption phenomena. The advantages of the method must be weighed against the complex calibration procedures necessary and thus the flank method will probably not find use as a routine method. However, in cases where high-resolution data in terms of valence state are needed, the flank method will provide useful data on ferric/ferrous ratios down to minimum FeO_total content of 6–8 wt%.     

Chondritic ingredients: II. Reconstructing early solar system history via refractory lithophile trace elements in individual objects of the Leoville CV3 chondrite

We performed a LA-ICP-MS study of refractory lithophile trace elements in 32 individual objects selected from a single section of the reduced CV3 chondrite Leoville. Ingredients sampled include ferromagnesian type I and II chondrules, Al-rich chondrules (ARCs), calcium-aluminum-rich inclusions (CAIs), a single amoeboid olivine aggregate (AOA), and matrix. The majority of rare earth element (REE) signatures identified are either of the category “group II” or they are relatively flat, i.e., more or less unfractionated. Data derived for bulk Leoville exhibit characteristics of the group II pattern. The bulk REE inventory is essentially governed by those of CAIs (group II), ARCs (flat or group II), type I chondrules (about 90% flat, 10% group II), and matrix (group II). Leoville matrix also shows a superimposed positive Eu anomaly. The excess in Eu is possibly due to terrestrial weathering. The group II pattern, however, testifies to volatility-controlled fractional condensation from a residual gas of solar composition at still relatively high temperature. In principle, this signature (group II) is omnipresent in all types of constituents, suggesting that the original REE carrier of all components was CAI-like dust. In addition, single-element anomalies occasionally superimposing the group II signature reveal specific changes in redox conditions. We also determined the bulk chemical composition of all objects studied. For Mg/Si, Mg/Fe, and Al/Ca, Leoville's main ingredients—type I chondrules and matrix—display a complementary relationship. Both components probably formed successively in the same source region.     

53Mn and 60Fe in iron meteorites—New data,model calculations

We measured specific activities of the long‐lived cosmogenic radionuclides ⁶⁰Fe in 28 iron meteorites and ⁵³Mn in 41 iron meteorites. Accelerator mass spectrometry was applied at the 14 MV Heavy Ion Accelerator Facility at ANU Canberra for all samples except for two which were measured at the Maier‐Leibnitz Laboratory, Munich. For the large iron meteorite Twannberg (IIG), we measured six samples for ⁵³Mn. This work doubles the number of existing individual ⁶⁰Fe data and quadruples the number of iron meteorites studied for ⁶⁰Fe. We also significantly extended the entire ⁵³Mn database for iron meteorites. The ⁵³Mn data for the iron meteorite Twannberg vary by more than a factor of 30, indicating a significant shielding dependency. In addition, we performed new model calculations for the production of ⁶⁰Fe and ⁵³Mn in iron meteorites. While the new model is based on the same particle spectra as the earlier model, we no longer use experimental cross sections but instead use cross sections that were calculated using the latest version of the nuclear model code INCL. The new model predictions differ substantially from results obtained with the previous model. Predictions for the ⁶⁰Fe activity concentrations are about a factor of 2 higher, for ⁵³Mn, they are ~30% lower, compared to the earlier model, which gives now a better agreement with the experimental data.     

Modern and historical tropical cyclone and tsunami deposits at the coast of Myanmar: Implications for their identification and preservation in the geological record

The catastrophic storm surge of tropical cyclone Nargis in May 2008 demonstrated Myanmar's exposure to coastal flooding. The investigation of sediments left by tropical cyclone Nargis and its predecessors is an important contribution to prepare for the impact of future tropical cyclones and tsunamis in the region, because they may extend the database for long-term hazard assessment beyond the relatively short instrumental and historical record. This study, for the first time, presents deposits of modern and historical tropical cyclones and tsunamis from the coast of Myanmar. The aim is to establish regional sedimentary characteristics that may help to identify and discriminate cyclones and tsunamis in the geological record, and to document post-depositional changes due to tropical weathering in the first years after deposition. These findings if used to interpret older deposits will extend the existing instrumental record of flooding events in Myanmar. Evaluating deposits that can be related to specific events, such as the 2006 tropical cyclone Mala and the 2004 Indian Ocean tsunami, indicates similar sedimentary characteristics for both types of sediments. Landward thinning and fining trends, littoral sediment sources and sharp lower contacts allow for the differentiation from underlying deposits, while discrimination between tropical cyclone and tsunami origin is challenging based on the applied methods. The modern analogues also demonstrate a rather low preservation potential of the sand sheets due to carbonate dissolution, formation of organic top soils, and coastal erosion. However, in coastal depressions sand sheets of sufficient thickness (>10 cm) may be preserved where the shoreline is prograding or stable. In the most seaward swale of a beach-ridge plain at the Rakhine coast, two sand sheets have been identified in addition to the deposits of 2006 tropical cyclone Mala. Based on a combination of optically stimulated luminescence, radiocarbon and ¹³⁷Cs dating, the younger sand layer is related to 1982 tropical cyclone Gwa, while the older sand layer is most probably the result of an event that took place prior to 1950. Comparison with historical records indicates that the archive is only sensitive to tropical cyclones of category 4 (or higher) with landfall directly in or a few tens of kilometres north of the study area. While the presented tropical cyclone records are restricted to the last 100 years, optically stimulated luminescence ages of the beach ridges indicate that the swales landward of the one investigated in this study might provide tropical cyclone information for at least the past 700 years.     

Rock magnetics of carbonate systems–investigating palaeodune archives on Fuerteventura (Canary Islands)

The mineral magnetic properties of Pleistocene aeolian dune sands from the island of Fuerteventura (Canary Islands, Spain) were studied in order to reconstruct the palaeoenvironmental evolution of Pleistocene climates during their formation. The palaeodunes on Fuerteventura mainly consist of carbonate sands admixed with dust and material of volcanic origin. Due to the low magnetic background caused by the diamagnetic character of carbonate sands, these archives offer a lot of potential for environmental magnetic studies to detect the imprint of dust, volcanic material and paedogenesis. Four sections of alternating palaeosurface–aeolianite sequences in palaeodune fields have been analysed by means of extensive rock magnetic measurements. These Quaternary archives consist of deposits originating from different sources. I. material blown from the shallow shelf, II. material of volcanic origin, and III. long-range transported dust. The rock magnetic findings enable a more detailed interpretation of the palaeosurfaces within the sequences. We are able to differentiate semiquantitatively between the different source materials on one hand and to distinguish on the other hand those from soil-forming processes. Soil formation is only weakly developed in the dust imprints in the palaeosol aeolianite sequences, linked to sparse vegetation cover during the Pleistocene on Fuerteventura.