区域铜元素的空间变异和自相关规律分析

研究地球化学元素在地球化学场中的空间最大变异距离、空间聚集以及空间异常分布情况。通过稳健半变差函数确定空间最大变异距离,在最大变异距离内分别对在不同的距离、原始数据和经过Box-Cox变换的数据使用局部空间自相关Moran′s Ii指数研究元素含量的空间聚集和空间异常,与基于C-A多重分形法的异常下限确定方法所圈定的异常范围进行对比。以面积为8 130km2的铜矿区所采集的1∶20万水系沉积物1 341个组合样点的Cu元素含量为例,局部Moran′s Ii能很好地划分空间聚集和空间异常,尤其是针对经过变换的数据能探测出比C-A法范围更大的聚集和异常,符合客观实际,与已知矿床(点)吻合很好。     

Seismic performance of masonry buildings during the 2007 Bala,Turkey earthquakes

A field investigation was conducted near the town of Bala after two strong earthquakes struck the region on December 20 and 27, 2007. The main objectives of this study are to present the results of the field investigation and examine the characteristics of the recorded ground motions and the corresponding response spectra. The focus of the research was on the causes of damage and failures commonly observed in masonry structures. This study classifies single family masonry dwellings in rural areas and investigates the seismic damage in unreinforced masonry structures. Turkish Earthquake Code requirements for masonry buildings are summarized and compared with the field observations. Our field investigation showed that there has been lack of quality control and regulation for the masonry construction. Diagonal shear cracking and out-of-plane failure were the two major factors that contributed to widespread damage in masonry structures.     

Complex deposits in the Lo Gam structure,northeastern Vietnam: mineralogy,geochemistry, and formation conditions

The Pb–Zn deposits in the Lo Gam structure, northeastern Vietnam, account for>80% of all the Pb and Zn resources of Vietnam. All the deposits make up four isolated ore districts (Thai Nguyen, Cho Don, Cho Dien, Na Son), which can be combined in one metallogenic zone extending for >100 km from southeast to northwest. The Pb–Zn deposits in all the ore districts show some similarity to stratiform (Mississippi-type) deposits: confinement to Devonian carbonate sediments; localization at the intersection of faults of different orientations; vein and stockwork (pocket-vein-disseminated) morphology of the mineralized zones; evidence for hydrothermal-metasomatic formation (carbonate-rock marbleization, quartz–carbonate veins, etc.); and low and moderate mineralization temperatures (<250 °C). On the other hand, some differences from stratiform deposits are observed: widespread occurrence of Permo-Triassic igneous rocks in the above ore districts; absent tabular orebodies, which are typical of stratiform deposits; large set of trace elements (In, Bi, Sb, Au, Ag, Cu, Cd) not typical of stratiform deposits; and an endogenic primary source, as evidenced by the isotope composition of sulfur (δS³⁴= 2.68‰), which is close to meteoritic, and the set of trace elements, which are mainly of deep genesis. All this indicates that the above Pb–Zn deposits within the carbonate units are low-and moderate-temperature hydrothermal-metasomatic products associated with active magmatism which took place in this region in the Permo-Triassic.The differences in the mineral composition of the deposits, as well as in the trace-element set and contents at different deposits, clearly indicate an intricate ore formation process and the relation of the deposits with magmatism of different compositions. The simple mineral composition and the limited set of trace elements (Cd, Ag, Sb, As) at the Lang Hich deposit are closer to the characteristics of stratiform deposits. Also, manifestations of magmatism are almost absent here. On the contrary, unusually high (ppm) In (75.8), Sn (307.5), Cu (1080), Ag (157.7), Bi (99), and As (13,650) contents were observed at the deposits of the Cho Don and Cho Dien districts, with widespread granitoid magmatism in the Phia Bioc complex. Rare-earth mineralization (orthite) and high Mo, Re, and Rb contents at the deposits of the Na Son district are probably due to the widespread occurrence of stratified alkaline volcanics and their subvolcanic analogs, which belong to the Pla Ma complex (ξγPZ₂ pm).     

K-Ar Dating of Fault Gouges from the Red River Fault Zone of Vietnam

Constraining the timing of fault zone formation is fundamentally important in terms of geotectonics to understand structural evolution and brittle fault processes.This paper presents the first authigenic illite K-Ar age data from fault gouge samples collected from the Red River Shear Zone at Lao Cai province,Vietnam.The fault gouge samples were separated into three grain-size fractions(0.1 μm,0.1-0.4 μm and 0.4-1.0 μm).The results show that the K-Ar age values decrease from coarser to finer grain fractions(24.1 to 19.2 Ma),suggesting enrichment in finer fraction of morerecently grown authigenic illites.The timing of the fault movement are the lower intercept ages at 0%detrital illite(19.2 ± 0.92 Ma and 19.4 ± 0.49 Ma).In combination with previous geochronological data,this result indicates that the metamorphism of the Day Nui Con Voi(DNCV) metamorphic complex took place before ca.26.8 Ma.At about 26.8 Ma-25 Ma,the fault strongly acted to cause the rapid exhumation of the rocks along the Red River-Ailoa Shan Fault Zone(RR-ASFZ).During brittle deformation,the DNCV slowly uplifted,implying weak movement of the fault.This brittle deformation might have lasted for ca.5 Ma.     

Triggered earthquake study in Tranh River No. 2 (Vietnam) Hydropower Reservoir

This article presents the results of investigating triggered earthquakes in the vicinity of Tranh River No.2 Hydropower Reservoir in recent years. It is found that earthquakes occurred in the vicinity of Tranh River Hydropower Reservoir, probably associated with the Trà My — Trà BÓng fault zone. It is estimated that this fault is capable of hosting an earthquake of M~6.1. The ‘b’ value for this earthquake sequence is 0.83, which is higher than the regional ‘b’ value of 0.60. We estimate that the return period of earthquakes of M=4.5, 5.0, 5.5 and 6.0 is 11, 29, 76 and 198 months respectively. On October 22, 2012 an earthquake M_S=4.6, I₀=6.0 (MSK-64) occurred at 13:41:28 hrs GMT. The epicenter of the earthquake was located at a distance of 5.5 km away from the center of the dam towards the west. The focal depth is about 4.5 km, and the rupture length is about 1.8 km.     

The detached eclipsing binary TX Her revisited

This paper presents new CCD Bessell BVRI light curves and photometric analysis of the Algol-type binary star TX Her. The CCD observations were carried out at Çanakkale Onsekiz Mart University Observatory in 2010. New BVRI light curves from this study and radial velocity curves from Popper (1970) were solved simultaneously using modern light and radial velocity curves synthesis methods. The general results show that TX Her is a well-detached eclipsing binary, however, both component stars fill at least half of their Roche lobes. A significant third light contribution to the total light of the system could not be determined. Using O–C residuals formed by the updated minima times, an orbital period study of the system was performed. It was confirmed that the tilted sinusoidal O–C variation corresponds to an apparent period variation caused by the light travel time effect due to an unseen third body. The following absolute parameters of the components were derived: M₁ = 1.62 ± 0.04 M_⊙, M₂ = 1.45 ± 0.03 M_⊙, R₁ = 1.69 ± 0.03 R_⊙, R₂ = 1.43 ± 0.03 R_⊙, L₁ = 8.21 ± 0.90 L_⊙ and L₂ = 3.64 ± 0.60 L_⊙. The distance to TX Her was calculated as 155 ± 10 pc, taking into account interstellar extinction. The position of the components of TX Her in the HR diagram are also discussed. The components are young stars with an age of ～500 Myr.     

The conditions of formation of sapphire and zircon in the areas of alkali-basaltoid volcanism in Central Vietnam

Study of the chemical composition of clinopyroxene and garnet megacrysts from the Dak Nong sapphire deposit and model calculations have shown that megacrysts originated from the crystallization of alkali basaltoid magma in a deep-seated intermediate chamber at 14–15 kbar, which is close to the Moho depth (50 km) in this part of southeastern Asia. The chamber was a source of heat and CO₂ fluids for the generation of crustal syenitic melts producing sapphires and zircons. The formation conditions of sapphires and zircons are significantly different. The presence of jadeite inclusions in placer zircons points to high pressures during their crystallization, which is confirmed by the ubiquitous decrepitation of CO₂-rich melt inclusions. Sapphires crystallized from iron-rich syenitic melt in the shallower Earth’s crust horizons with the participation of CO₂ and carbonate–H₂O–CO₂ fluids. The subsequent eruptions of alkali basalts favored the transportation of garnet and pyroxene megacrysts as well as sapphire and zircon xenocrysts to the surface. It is shown that sapphire deposits can be produced only during multistage basaltic volcanism with deep-seated intermediate chambers in the regions with thick continental crust. The widespread megacryst mineral assemblage (clinopyroxene, garnet, sanidine, ilmenite) and the presence of placer zircon megacrysts can be used as indicators for sapphire prospecting.     

Interaction of calcium dioleate collector colloids with calcite and fluorite surfaces as revealed by AFM force measurements and molecular dynamics simulation

Spherical calcium dioleate particles (∼ 10 μm in diameter) were used as AFM (atomic force microscope) probes to measure interaction forces of the collector colloid with calcite and fluorite surfaces. The attractive AFM force between the calcium dioleate sphere and the fluorite surface is strong and has a longer range than the DLVO (Derjaguin–Landau–Verwey–Overbeek) prediction. The repulsive AFM force between the calcium dioleate sphere and the fluorite surface does not agree with the DLVO prediction. Consideration of non-DLVO forces, including the attractive hydrophobic force, was necessary to explain the experimental results. The non-DLVO interactions considered were justified by the different interfacial water structures at fluorite– and calcite–water interfaces as revealed by the numerical computation experiments using molecular dynamics simulation. The density of interfacial water at the fluorite surface is low and the fluorite surface is not strongly wetted by water molecules. In contrast to the water at the fluorite surface, water molecules at the calcite surface form tightly packed monolayer structures and the calcite surface is extensively hydrated by water molecules. The interfacial water structure agrees with the AFM force measurements and the flotation recovery data. The strong attraction between the calcium dioleate colloid and the fluorite surface, and the moderately wetted fluorite surface by water molecules explain the better flotation response of fluorite with the oleate collector colloid.