Star formation and figure rotation in the early-type galaxy NGC 2974

We present Galaxy Evolution Explorer ( GALEX ) far-ultraviolet (FUV) and near-ultraviolet (NUV) imaging of the nearby early-type galaxy NGC 2974, along with complementary ground-based optical imaging. In the ultraviolet, the galaxy reveals a central spheroid-like component and a newly discovered complete outer ring of radius 6.2 kpc, with suggestions of another partial ring at an even larger radius. Blue FUV–NUV and UV-optical colours are observed in the centre of the galaxy and from the outer ring outwards, suggesting young stellar populations (≲1 Gyr) and recent star formation in both locations. This is supported by a simple stellar population model which assumes two bursts of star formation, allowing us to constrain the age, mass fraction and surface mass density of the young component pixel by pixel. Overall, the mass fraction of the young component appears to be just under 1 per cent (lower limit, uncorrected for dust extinction). The additional presence of a nuclear and an inner ring (radii 1.4 and 2.9 kpc, respectively), as traced by [O  iii ] emission, suggests ring formation through resonances. All three rings are consistent with a single pattern speed of  78 ± 6  km s⁻¹ kpc⁻¹, typical of S0 galaxies and only marginally slower than expected for a fast bar if traced by a small observed surface brightness plateau. This thus suggests that star formation and morphological evolution in NGC 2974 at the present epoch are primarily driven by a rotating asymmetry (probably a large-scale bar), despite the standard classification of NGC 2974 as an E4 elliptical.     

Demersally drifting invertebrates from Kongsfjorden,Svalbård (Arctic Ocean)–a comparison of catches from drift-pump and drift-nets

Demersally drifting organisms were collected at Ny Ålesund (Svalbård–Arctic Ocean) to study the taxon composition and relative abundances in the Arctic summer. Catch potentials of two collection devices for demersal drift were compared. A lowvolume submersible drift-pump and a drift-net unit were employed for the collection of demersally drifting biota, particularly for shallow aquatic habitats. With the exception of Appendicularia, Chaetognatha, Coelenterata, and Ctenophora, which were damaged at times, the pump catches were in good condition and sufficient for identification and quantification of less mobile fauna. A comparison of the two devices revealed that the drift-pump collected more specimens than the drift-net. However, the drift-net may have caused an underestimation of the abundances of invertebrates. No differences in identified taxon number and indices of richness, evenness and diversity were found. However, the proportion of invertebrate animals in the two devices was different for the three groups: zooplankton, macrofauna and meiofauna. At Svalbård, zooplankton, larvae of macrofauna, and meiofauna were successfully collected by the two collecting devices. However, the catchibility of the two devices in collecting various invertebrate taxa was different and, therefore, a sound ‘Device Effect’ was revealed.     

Asteroseismic modelling of the solar-like star β Hydri

We present the results of modelling the subgiant star β Hydri using seismic observational constraints. We have computed several grids of stellar evolutionary tracks using the Aarhus STellar Evolution Code (ASTEC, Christensen-Dalsgaard in Astrophys. Space Sci. 316:13, 2008a), with and without helium diffusion and settling. For those models on each track that are located at the observationally determined position of β Hydri in the Hertzsprung-Russell (HR) diagram, we have calculated the oscillation frequencies using the Aarhus adiabatic pulsation package (ADIPLS, Christensen-Dalsgaard in Astrophys. Space Sci. 316:113, 2008b). Applying the near-surface corrections to the calculated frequencies using the empirical law presented by Kjeldsen et al. (Astrophys. J. 683:L175, 2008), we have compared the corrected model frequencies with the observed frequencies of the star. We show that after correcting the frequencies for the near-surface effects, we have a fairly good fit for both l=0 and l=2 frequencies. We also have good agreement between the observed and calculated l=1 mode frequencies, although there is room for improvement in order to fit all the observed mixed modes simultaneously.     

Aerobic oxidation of mackinawite (FeS) and its environmental implication for arsenic mobilization

Oxidation of mackinawite (FeS) and concurrent mobilization of arsenic were investigated as a function of pH under oxidizing conditions. At acidic pH, FeS oxidation is mainly initiated by the proton-promoted dissolution, which results in the release of Fe(II) and sulfide in the solution. While most of dissolved sulfide is volatilized before being oxidized, dissolved Fe(II) is oxidized into green rust-like precipitates and goethite (α-FeOOH). At basic pH, the development of Fe(III) (oxyhydr)oxide coating on the FeS surface inhibits the solution-phase oxidation following FeS dissolution. Instead, FeS is mostly oxidized into lepidocrocite (γ-FeOOH) via the surface-mediated oxidation without dissolution. At neutral pH, FeS is oxidized via both the solution-phase oxidation following FeS dissolution and the surface-mediated oxidation mechanisms. The mobilization of arsenic during FeS oxidation is strongly affected by FeS oxidation mechanisms. At acidic pH (and to some extent at neutral pH), the rapid FeS dissolution and the slow precipitation of Fe (oxyhydr)oxides results in arsenic accumulation in water. In contrast, the surface-mediated oxidation of FeS at basic pH leads to the direct formation of Fe (oxyhydr)oxides, which provides effective adsorbents for As under oxic conditions. At acidic and neutral pH, the solution-phase oxidation of dissolved Fe(II) accelerates the oxidation of the less adsorbing As(III) to the more adsorbing As(V). This study reveals that the oxidative mobilization of As may be a significant pathway for arsenic enrichment of porewaters in sulfidic sediments.     

Effects of natural and calcined oyster shells on Cd and Pb immobilization in contaminated soils

In Korea, soils adjacent to abandoned mines are commonly contaminated by heavy metals present in mine tailings. Further, the disposal of oyster shell waste by oyster farm industries has been associated with serious environmental problems. In this study, we attempted to remediate cadmium (Cd)- and lead (Pb)-contaminated soils typical of those commonly found adjacent to abandoned mines using oyster shell waste as a soil stabilizer. Natural oyster shell powder (NOSP) and calcined oyster shell powder (COSP) were applied as soil amendments to immobilize Cd and Pb. The primary components of NOSP and COSP are calcium carbonate (CaCO₃) and calcium oxide (CaO), respectively. X-ray diffraction, X-ray fluorescence and scanning electron microscope analyses conducted in this study revealed that the calcination of NOSP at 770°C converted the less reactive CaCO₃ to the more reactive CaO. The calcination process also decreased the sodium content in COSP, indicating that it was advantageous to use COSP as a liming material in agricultural soil. After 30 days of incubation, we found that the 0.1 N HCl-extractable Cd and Pb contents in soil decreased significantly as a result of an increase in the soil pH and the formation of metal hydroxides. COSP was more effective in immobilizing Cd and Pb in the contaminated soil than NOSP. Overall, the results of this study suggest that oyster shell waste can be recycled into an effective soil ameliorant.     

Effects of biochar, cow bone, and eggshell on Pb availability to maize in contaminated soil irrigated with saline water

Toxicity of heavy metals adversely affects environment and human health. Organic materials derived from natural matters or wastes have been applied to soils to reduce the mobility of contaminants such as heavy metals. However, the application of cow bone powder (CB), biochar (BC), and eggshell powder (ES) is rarely investigated for the reduction of Pb bioavailability in soils irrigated with saline water. The objective of this study was to assess the effectiveness of CB, BC, and ES additions as immobilizing substances on Pb bioavailability in shooting range soil irrigated with deionized and saline water. Each additive of CB, BC, and ES at 5 % (w/w) was mixed with soils and then the deionized and saline water were irrigated for 21 days. With deionized water irrigation, the soils treated with CB, BC, and ES exhibited higher pH when compared with saline water irrigation. With saline water irrigation, the electrical conductivity, water-soluble anions, and cations were significantly increased in soils treated with CB, BC, and ES. The water-soluble Pb in soils treated with CB, BC, and ES was significantly decreased with saline water irrigation. On the other hand, the water-soluble Pb in soil treated with CB was increased with deionized water irrigation. Only BC with saline water irrigation decreased the Pb concentration in maize shoots.     

2D Tunnel Numerical Investigation: The Influence of the Simplified Excavation Method on Tunnel Behaviour

Tunnel excavation is a three-dimensional (3D) problem. However, despite recent advances in computing resources, 3D models are still computationally inefficient and two-dimensional (2D) simulations are therefore often used. Modelling the tunnelling process in a 2D plane strain analysis requires a specific approach that allows a 3D tunnelling effect to be taken into consideration. As far as the urban tunnels are concerned, most cases reported in the literature have focused on estimating the applicability of these equivalent approaches that are based on the evaluation of the settlement that develops on the ground surface, without considering the influence of segment joints. The main objective of this study was to provide a 2D numerical investigation to highlight the influence of two equivalent approaches, that is, the convergence-confinement method (CCM) and the volume loss method (VLM), on the behaviour of a tunnel built in an urban area, in terms of not only the surface settlement but also the structural lining forces, taking into account the effect of segment joints. A technique that can be used to simulate the tunnel wall displacement process, based on the principles of the VLM, has been developed using the FLAC^3D finite difference program (Itasca in FLAC fast Lagrangian analysis of continua, version 4.0; User’s manual, http.itascacg.com, 2009). A comparison with 3D numerical results has been introduced to estimate the precision of these 2D equivalent approaches. The results have shown a significant influence of the tunnel boundary deconfinement technique and segment joints on the tunnel lining behaviour and surface settlements. The structural forces obtained by means of the CCM are often smaller than those determined with the VLM for the same surface settlement. Generally, the structural lining forces determined by the CCM are in better agreement with the 3D numerical results than the ones obtained with the VLM. However, in order to obtain an accurate estimation of the structural forces, the impact of the construction loads during tunnelling should be taken into account.     

Strategically Locating Wildlife Crossing Structures for Florida Panthers Using Maximal Covering Approaches

Crossing structures are an effective method for mitigating habitat fragmentation and reducing wildlife‐vehicle collisions, although high construction costs limit the number that can be implemented in practice. Therefore, optimizing the placement of crossing structures in road networks is suggested as a strategic conservation planning method. This research explores two approaches for using the maximal covering location problem (MCLP) to determine optimal sites to install new wildlife crossing structures. The first approach is based on records of traffic mortality, while the second uses animal tracking data for the species of interest. The objective of the first is to cover the maximum number of collision sites, given a specified number of proposed structures to build, while the second covers as many animal tracking locations as possible under a similar scenario. These two approaches were used to locate potential wildlife crossing structures for endangered Florida panthers (Puma concolor coryi) in Collier, Lee, and Hendry Counties, Florida, a population whose survival is threatened by excessive traffic mortality. Historical traffic mortality records and an extensive radio‐tracking dataset were used in the analyses. Although the two approaches largely select different sites for crossing structures, both models highlight key locations in the landscape where these structures can remedy traffic mortality and habitat fragmentation. These applications demonstrate how the MCLP can serve as a useful conservation planning tool when traffic mortality or animal tracking data are available to researchers.