Characteristics of adjoint sensitivity to potential vorticity

Structures of adjoint sensitivities to potential vorticity for specific initial and final norm are investigated for a short-range cyclone forecast in a three-dimensional quasigeostrophic (QG) model. Moreover, adjoint sensitivities to potential vorticity are compared with nonlinear sensitivities calculated for the same cyclogenesis case in the QG model. The adjoint sensitivities using different initial and final norms (e.g., total QG disturbance energy and potential enstrophy) show approximately similar characteristics for the horizontal and vertical structures and evolutions. Consistent with previous studies, the horizontal structure of the adjoint sensitivity is smaller for the energy norm than for the potential enstrophy norm. The dynamical mechanism of cyclone development by adjoint sensitivity coincides with that of nonlinear sensitivity, with slight differences in the region of sensitivity maxima over the upstream (nascent) low for the adjoint (nonlinear) sensitivity. The adjoint sensitivities show different vertical distributions from the nonlinear sensitivities. Consistent with the sensitive regions denoted by singular vectors and error evolution in the QG model, maxima of the adjoint sensitivities are located at both the upper and lower boundaries, with prominent secondary peaks in the lower to mid-troposphere of the domain. The level of the secondary maxima changes depending on the initial and final norm used. The secondary peak is located in the lower to mid- (mid-) troposphere for the total QG disturbance energy (potential enstrophy) as the initial and final norm. Based on the correspondence in the level of the sensitivity maxima in the interior of the domain between the adjoint and nonlinear sensitivities, adjoint sensitivities may serve as an alternative to nonlinear sensitivities given the enormous computing expenses in nonlinear sensitivity calculation.     

Investigating Correlations and Variations of Air Pollutant Concentrations under Conditions of Rapid Industrialization – Kocaeli (1987–2009)

In this study, it was aimed to characterize temporal variations of air pollutants for determining contribution to pollution episodes and to obtain correlations between these pollutants. With this aim we used data analysis for measured sulfur dioxide (SO₂), particulate matter (PM, black fume and PM10), nitrogen oxides (NO_x), ozone (O₃), carbon monoxide (CO), methane (CH₄), and non‐methane hydrocarbons (NMHC) recorded in Kocaeli, one of the most industrilizated cities of Turkey. Pollutant concentrations were the results of continuous and semi‐automatic measurements. Semi‐automatic measurements of SO₂ and PM (black fume) were enclosing period from 1987 to 2008 whereas continuous monitoring of all pollutants included years of 2007–2009. In the first stage of the study daily, monthly, annual, and seasonal variations of pollution were researched. Annual average concentrations were compared with limits set by Air Quality Protection Regulation (AQPR), Air Quality Evaluation and Management Regulation (AQEMR), World Health Organization (WHO), European Union (EU), and National Ambient Air Quality Standards (USEPA). In the following stage relationships between pollutants such as NO₂–O₃, NO_x–CO, NO_x–NMHC, and NO_x–SO₂ were investigated and correlation coefficients were determined as 0.87, 0.56, 0.51, and 0.69, respectively. R² values of regression models developed from these correlations were 0.78, 0.56, 0.34, and 0.72, respectively. Vehicle density of the traffic was evaluated with NO_x–O₃ emissions and decrease was seen in NO_x emissions due to decreasing vehicle density at weekends whereas O₃ concentrations increased. These correlations enable prediction of the parameters that cannot be measured which is important for providing improvement in early warning systems.     

Numerical modeling and experiments of coarsening foam

Numerical and experimental results of drying and wetting foam are presented. Foam can be wetted by wash water delivered on its top boundary, or drained by allowing the liquid to move downward in response to gravity. These processes are governed by nonlinear equations that in special cases accept exact solutions. Here we develop a numerical model that satisfies realistic boundary conditions. Numerical results are presented in conjunction with experiments conducted with coarsening foam. In addition, calculations were carried out modeling the wetting and draining of coarsened foam. From the simulations and experiments, coarsening bubbles were found responsible for accelerating drainage, or vice versa.     

<Emphasis Type="Italic">Cochlodinium polykrikoides</Emphasis> red tide detection in the South Sea of Korea using spectral classification of MODIS data

To distinguish true red tide water (particularly Cochlodinium polykrikoides blooms) from non-red tide water (false satellite high chlorophyll water) in the South Sea of Korea, we developed a systematic classification method using spectral information from MODIS level products and applied it to five different harmful algal bloom events. Red tide and nonred tide waters were classified based on four different criteria. The first step revealed that the radiance peaks of potential red tide water occurred at 555 and 678 nm. The second step separated optically different waters that were influenced by relatively low and high contributions of colored dissolved organic matter (CDOM) (including detritus) to chlorophyll. The third and fourth steps discriminated red tide water from non-red tide water based on the blue-to-green ratio in areas with lower and higher contributions of CDOM to chlorophyll, respectively. After applying the red tide classification (using the four criteria), the spectral response of the red tide water, which is influenced by pigment concentration, showed different slopes for the blue and green bands (lower slope at blue bands and higher slope at green bands). The opposite result was found for non-red tide water, due to decreasing phytoplankton absorption and increasing detritus/CDOM absorption at blue bands. The results were well matched with the discoloration of water (blue to dark red/brown) and delineated the areal coverage of C. polykrikoides blooms, revealing the nature of spatial and temporal variations in red tides. This simple spectral classification method led to increase user accuracy for C. polykrikoides and non-red tide blooms (>46% and >97%) and provided a more reliable and robust identification of red tides over a wide range of oceanic environments than was possible using chlorophyll a concentration, chlorophyll anomaly, fluorescence analysis, or proposed red tide detection algorithms.     

Morphological and genetic comparison of two strains of a Prorocentrum species isolated from Zhejiang coastal water of China and Masan Bay of Korea

In this paper, we examined the detailed morphology of two strains of Prorocentrum isolated from the coastal waters of Zhejiang (Wenling area), China, and Masan Bay of Korea. A taxonomic comparison was made among strains on the basis of morphological and molecular data. The cellular dimensions of the Chinese Wenling strain (LAMB090508) and Korean strain (PDKS0206) were similar and the cells of both strains were of asymmetric and elongated shape. The posterior end of most cells was rounded. Megacytic zones of aged cells were broader with dense tiny knobs. The roundish nucleus was located in the posterior part of the cell. A few irregular shaped chloroplasts were distributed within the cell. The nucleotide similarity of the two strains, determined from the 5.8S rDNA-ITS sequences, was 99.83%. The comparative results of morphology and molecular analysis suggest that both strains isolated from China and Korea were the identical species, Prorocentrum donghaiense Lu.     

Comparison of radiocarbon and OSL dating methods for a Late Quaternary sediment core from Lake Ulaan,Mongolia

Both radiocarbon and optically stimulated luminescence (OSL) dating methods were applied to test their suitability for establishing a chronology of arid-zone lacustrine sediments using a 5.88-m-long core drilled from Lake Ulaan, southern Mongolia. Although the radiocarbon and OSL ages agree in some samples, the radiocarbon ages are older than the corresponding OSL ages at the 550-cm depth horizon (late Pleistocene) and in the 100–300-cm interval (early to late Holocene). In the early to late Holocene, radiocarbon ages are consistently older than OSL ages by 4,100–5,800 years, and in the late Pleistocene by 2,700–3,000 years. Grain-size analysis of early to late Holocene sediments and one late Pleistocene sediment sample (550-cm depth) indicates that eolian processes were the dominant sediment-transport mechanism. Also, two late Pleistocene sediments samples (from 400- to 500-cm depths) are interpreted to have been deposited by both eolian and glaciofluvial processes. Accordingly, the radiocarbon ages that were older than the corresponding OSL ages during the Holocene seem to have been a consequence of the influx of ¹⁴C-deficient carbon delivered from adjacent soils and Paleozoic carbonate rocks by the westerly winds, a process that is also active today. In addition to the input of old reworked carbon by eolian processes, the late Pleistocene sediments were also influenced by old carbon delivered by deglacial meltwater. The results of this study suggest that when eolian sediment transport is suspected, especially in lakes of arid environments, the OSL dating method is superior to the radiocarbon dating method, as it eliminates a common ‘old-carbon’ error problem.     

Immobilization of As and Pb in contaminated sediments using waste resources

As and Pb-contaminated sediment obtained from the Nakdong Lake and Yeongsan River in the Republic of Korea was stabilized using a combination of calcined oyster shell (COS), waste cow bone (WCB) and coal mine drainage sludge (CMDS). The effectiveness of the stabilization treatment was evaluated using the Korean Standard Test (KST). The KST tests were performed using 1 N HCl extraction fluid for As and 0.1 N HCl extraction fluid for Pb. Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) analyses were performed to investigate the mechanism responsible for As and Pb immobilization upon treatment. The treatment results showed that effective stabilization of As and Pb-contaminated sediment was obtained. Specifically, 10 wt% COS–5 wt% CMDS was the best treatment for As immobilization and 5 wt% COS–5 wt% WCB was the best treatment for Pb immobilization. The COS–WCB treatment outperformed the COS–CMDS treatment in immobilizing Pb in the contaminated sediment. SEM–EDX results indicated that Pb immobilization was strongly associated with Ca, Si, Al and P while As immobilization was strongly associated with Fe and O. Therefore, utilization of COS, WCB and CMDS is beneficial for the stabilization of contaminated sediment.     

Simultaneous stabilization of arsenic, lead, and copper in contaminated soil using mixed waste resources

In the present study, stabilization treatment using waste resource stabilizers was performed for soil contaminated with As and heavy metals (Pb and Cu). Calcined oyster shell (COS) and coal mine drainage sludge (CMDS) were used as a mixed stabilizing agent for a wet-curing duration of 28 days. After the stabilization treatment, the treatment process efficiency was evaluated by the results of various batch- and column-leaching tests. Neutral and weak acid extraction methods, such as water-soluble extraction and SPLP, did not exhibit satisfactory results for heavy metal stabilization, even if they showed very low leachability. On the other hand, TCLP and 0.1 M HCl extraction showed that the stabilizers significantly reduced the amount of heavy metals leached from the soil, which strongly supports the thesis that the stabilization treatment is efficient in the acidic leaching conditions that were explored. Specifically, in the 0.1 M HCl extraction, the reduction efficiencies of As, Pb, and Cu leachings were more than 90 %, compared with control experiments. This study demonstrates that the application of waste resources for the stabilization of As and heavy metals is feasible. However, some limitations observed in the experiments should be considered in future studies, such as the mobilization of alkali-soluble elements, and in particular, exchangeable fractions of Cu. In addition, the treatment efficiency can be evaluated by different leaching methods, which suggests that multidirectional approaches are required for the proper evaluation of stabilization treatment.     

Comparison of the Ordovician-Carboniferous Boundary Between Korea and NE China: Implications for Correlation and Tectonic Evolution

There is a great hiatus between Ordovician and Carboniferous strata in the Northeast China and Korean Peninsula. In order to understand geology and tectonic evolution, and to find out the similarities and differences in both regions, two sections in the Western Hill near Beijing in NE China and several sections in the Korean Peninsula were selected to examine their geologic boundaries between Lower and Upper Paleozoic strata to compare their characteristic features. At four sites in the two sections in the Western Hill near Beijing were examined their contact relations. The Hui Yu section is the same horizon where one site is top of a quarry hill and the other of down hill. Mid-Carboniferous Qingshuijian Formation rests on the Ordovician Majiagou Formation. Limestone beds are more commonly intercalated with shale and sandstone at site 2 of the Hui Yu section, while at site 1, conglomerate beds are dominant. Site 1 of the Se Shu Fen section shows eroded and concealed karst topography and conglomerate beds are intercalated within shale beds. Silurian and Devonian strata are absent in these areas. In the Korean Peninsula, most O-C contacts occur between Ordovician limestone formation and Carboniferous strata, although Silurian strata occur beneath the Carboniferous strata in the Jeongseon area and Pyeongnam Basin. Most contact relations are parallel unconformity and angular unconformity is rarely seen. The O-C relations in both regions are similar to each other, and these indicate that the Korean Peninsula was located near or belonged to the Sino-Korean paraplatform during Paleozoic time.     

Soft‐sediment deformation structures in Cretaceous non‐marine deposits of southeastern Gyeongsang Basin,Korea: Occurrences and origin

A variety of soft‐sediment deformation structures formed during or shortly after deposition occurs in the Cretaceous Seongpori and Dadaepo Formations of the southeastern Gyeongsang Basin exposed along coastal areas of southeastern Korean Peninsula for 0.5–2 km. These are mostly present in a fluvial plain facies, with interbedded lacustrine deposits. In this study, the features of different kinds of soft‐sediment deformation structures have been interpreted on the basis of sedimentology of structure‐bearing deposits, comparison with normal sedimentary structures, timing and mechanism of deformation, and triggering mechanisms. The soft‐sediment deformation structures can be classified into four morphological groups: (i) load structures (load casts, ball‐and‐pillow structures); (ii) soft‐sediment intrusive structures (dish‐and‐pillars, clastic dykes, sills); (iii) ductile disturbed structures (convolute folds, slump structures); and (iv) brittle deformation structures (syndepositional faulting, dislocated breccia). The most probable triggering mechanisms resulting in these structures were seismic shocks. These interpretations are based on the following field observations: (i) location of the study area within tectonically active fault zone reactivated several times during the Cretaceous; (ii) deformation structures confined to single stratigraphic levels; (iii) lateral continuity and occurrences of various soft‐sediment deformation structures in the deformed level over large areas; (iv) absence of depositional slope to indicate gravity sliding or slumping; and (v) similarity to the structures produced experimentally. The soft‐sediment deformation structures in the study areas are thus interpreted to have been generated by seismic shocks with an estimated magnitude of M > 5, representing an intermittent record of the active tectonic and sedimentary processes during the development and evolution of two formations from the late Early Cretaceous to the Late Cretaceous.