Generation of baroclinic topographic waves by a tropical cyclone impacting a low-latitude continental shelf

Numerical model experiments have been performed to analyze the low-latitude baroclinic continental shelf response to a tropical cyclone. The theory of coastally trapped waves suggests that, provided appropriate slope, latitude, stratification and wind stress, bottom-intensified topographic Rossby waves can be generated by the storm. Based on a scale analysis, the Nicaragua Shelf is chosen to study propagating topographic waves excited by a storm, and a model domain is configured with simplified but similar geometry. The model is forced with wind stress representative of a hurricane translating slowly over the region at 6 km h⁻¹. Scale analysis leads to the assumption that baroclinic Kelvin wave modes have minimal effect on the low-frequency wave motions along the slope, and coastal-trapped waves are restricted to topographic Rossby waves. Analysis of the simulated motions suggests that the shallow part of the continental slope is under the influence of barotropic topographic wave motions and at the deeper part of the slope baroclinic topographic Rossby waves dominate the low-frequency motions. Numerical solutions are in a good agreement with theoretical scale analysis. Characteristics of the simulated baroclinic waves are calculated based on linear theory of bottom-intensified topographic Rossby waves. Simulated waves have periods ranging from 153 to 203 h. The length scale of the waves is from 59 to 87 km. Analysis of energy fluxes for a fixed volume on the slope reveals predominantly along-isobath energy propagation in the direction of the group velocity of a topographic Rossby wave. Another model experiment forced with a faster translating hurricane demonstrates that fast moving tropical cyclones do not excite energetic baroclinic topographic Rossby waves. Instead, robust inertial oscillations are identified over the slope.     

Unique desert caves as a valuable geological resource: first detailed geological heritage assessment of the Sannur Cave,Egypt

Arabian Journal of Geosciences - Surface albedo is a key parameter in earth energy budget and global climate change studies. In this aspect, variation in vegetation covers is one of the most...     

Sand dune migration as a factor of geoheritage loss: Evidence from the Siwa Oasis (Egypt) and implications for geoheritage management

Anthropogenic damage of geoheritage is documented widely, but natural processes can also lead to geoheritage loss. For instance, sand dune migration causes submergence of unique geological and palaeontological sites in desert environments of the Sahara. The Siwa Oasis in the Western Desert of Egypt boasts rich geoheritage, which is represented in many localities. Three of them in the southern part of the oasis are outcrops of highly-fossiliferous limestones. Palaeontological, sedimentary, palaeogeographical, and geomorphological types of geoheritage are recognized there. Sand dune activity on the study area is registered both visually and with remote sensing techniques. Denudation and destruction of naturally-exposed rocks is documented. Evidence of outcrop submergence with sand is found in all cases. The localities are situated in the pathway of rapid (up to ?10 m/yr) dune migration. One locality may disappear within one–two years. Sand dune migration has to be considered as a factor of geoheritage loss in the Siwa Oasis, and the relevant protection of the studied localities is necessary. Geopark creation and improvement of water use in the oasis can also help significantly, as well as the reference to archaeological experience of excavation and protection of heritage sites submerged by sands. More generally, geoheritage conservation should be integrated with a program for sustainable oasis development.     

A scheme to set preferred magnitudes in the ISC Bulletin

One of the main purposes of the International Seismological Centre (ISC) is to collect, integrate and reprocess seismic bulletins provided by agencies around the world in order to produce the ISC Bulletin. This is regarded as the most comprehensive bulletin of the Earth’s seismicity, and its production is based on a unique cooperation in the seismological community that allows the ISC to complement the work of seismological agencies operating at global and/or local-regional scale. In addition, by using the seismic wave measurements provided by reporting agencies, the ISC computes, where possible, its own event locations and magnitudes such as short-period body wave m _b and surface wave M _S . Therefore, the ISC Bulletin contains the results of the reporting agencies as well as the ISC own solutions. Among the most used seismic event parameters listed in seismological bulletins, the event magnitude is of particular importance for characterizing a seismic event. The selection of a magnitude value (or multiple ones) for various research purposes or practical applications is not always a straightforward task for users of the ISC Bulletin and related products since a multitude of magnitude types is currently computed by seismological agencies (sometimes using different standards for the same magnitude type). Here, we describe a scheme that we intend to implement in routine ISC operations to mark the preferred magnitudes in order to help ISC users in the selection of events with magnitudes of their interest.     

Bottom water flows in the tropical fractures of the Northern Mid-Atlantic Ridge

The goal of this paper is to study the flows of Antarctic Bottom Water through the fracture zones in the northern part of the Mid-Atlantic Ridge based on the Conductivity-Temperature-Depth and Lowered Acoustic Doppler Current Profiler observations in 2014, 2015, and 2016. We measured the thermohaline properties and velocities and analyzed the flows of bottom water in the Strakhov, Bogdanov, nameless (07°28′N), Vernadsky, Doldrums, Arkhangelsky, Ten Degree, Vema, Marathon, Fifteen Twenty, and Kane fracture zones. These abyssal channels connect the deep basins of the East and West Atlantic. In addition to the known fact that the main portion of water propagates through the Vema Fracture Zone (11°N), we estimated that additionally a half of this volume propagates through the other fractures. Nevertheless, the pathway for the coldest water is located in the Vema Fracture Zone. Velocities of bottom currents in this fracture reach 45 cm/s. We found strong difference in the structure and transport through the Vema Fracture Zone based on four sections across the fracture occupied in 3 years from 2014 to 2016. The transport varies from 0.7 to 1.2 Sv. The core of maximum velocity in the main channel of this fracture changes its depth between 4000 m and the bottom at 4650 m. The total transport through the other fracture zones is as high as 0.48 ± 0.05 Sv.     

Preparation and Certification of Re-Os Dating Reference Materials: Molybdenites HLP and JDC

Two Re-Os dating reference material molybdenites were prepared. Molybdenite JDC and molybdenite HLP are from a carbonate vein-type molybdenum-(lead)-uranium deposit in the Jinduicheng-Huanglongpu area of Shaanxi province, China. The samples proved to be homogeneous, based on the coefficient of variation of analytical results and an analysis of variance test. The sampling weight was 0.1 g for JDC and 0.025 g for HLP. An isotope dilution method was used for the determination of Re and Os. Sample decomposition and pre-concentration of Re and Os prior to measurement were accomplished using a variety of methods: acid digestion, alkali fusion, ion exchange and solvent extraction. Negative thermal ionisation mass spectrometry and inductively coupled plasma-mass spectrometry were used for the determination of Re and ¹⁸⁷Os concentration and isotope ratios. The certified values include the contents of Re and Os and the model ages. For HLP, the Re content was 283.8 ± 6.2 μg g⁻¹, ¹⁸⁷Os was 659 ± 14 ng g⁻¹ and the Re-Os model age was 221.4 ± 5.6 Ma. For JDC, the Re content was 17.39 ± 0.32 μg g⁻¹, ¹⁸⁷Os was 25.46 ± 0.60 ng g⁻¹ and the Re-Os model age was 139.6 ± 3.8 Ma. Uncertainties for both certified reference materials are stated at the 95% level of confidence. Three laboratories (from three countries: PR. China, USA, Sweden) joined in the certification programme. These certified reference materials are primarily useful for Re-Os dating of molybdenite, sulfides, black shale, etc.     

Eigen analysis of tree-ring records: part 3, taking heteroscedasticity and sampling effects into consideration

This paper reports on the further development of a new technique for standardization of tree-ring records called the eigen analysis of tree-ring records. The data are from the same sample set of 56 long-lived Qilian junipers (Sabina przewalskii Kom.) from the Dulan region in western China as was used in our previous paper (Yang et al. 2011b). To assess the heteroscedasticity of individual record deviations from the sample set regional curve (RC), we tested five different definitions of those deviations. Direct computations of eigenvectors of all relevant intrarecord covariation matrices turned out to be greatly affected by observational and computational noise; an analytic approximation of these vectors was therefore desirable. The Bessel function of the first kind and the zero order proved suitable for such an approximation, especially because the deviations were defined via subtraction of the RC from raw ring width records. Exclusion of the contributions of the first segment of the Bessel approximation, corresponding to the extremely large first eigenvalue, rendered individual record deviations from RC homoscedastic. Therefore, the routine Fourier basis became applicable to extract climate-dependent components of the residual deviations. A Fourier expansion of the Dulan chronology revealed the quasi-200-year-long solar activity cycle to be the main factor affecting Dulan tree growth.     

激光剥蚀-等离子体质谱技术及其在地球化学宇宙化学和环境研究中的应用

激光剥蚀-等离子体质谱(LA-ICPMS)已成为地球化学、宇宙化学和环境研究领域元素和同位素原位分析最重要的技术之一。文章介绍了多种类型的质谱仪及其使用的激光器。用途最广的LA-ICPMS仪器之一是单接收器扇形磁场质谱仪,配有Nd:YAG激光剥蚀系统(激光波长分为193 nm和213 nm两种),MPI Mainz实验室使用的就是这套系统,文章对此作一详细介绍。文中阐述了数据优化技术及其多种校正过程;介绍LA-ICPMS在痕量元素和同位素分析领域的一些应用,包括参考物质的研制,Hawaiian玄武岩、Martian陨石、生物骨针和珊瑚虫中痕量元素分析及熔融包裹体和富钙-铝碳质球粒陨石中的铅和锶同位素测量。