Problems in the determination of sensible heat flux over snow

Measurements, as well as the majority of present–day GCM simulations, indicate an increase in air temperature, especially for polar regions. In order to improve the quality of GCM predictions for these regions, it is necessary to achieve good parameterization of the energy exchange, especially of the sensible heat flux between atmosphere and snow, because the high latitudes are snow–covered for as many as nine months. During the snowmelt periods in 1995 and 1998, eddy–covariance and profile measurements of wind speed and air temperature were carried out in the Kärkevagge, a valley in the Abisko Mountains in Swedish Lapland. Sensible heat flux was calculated by the profile and bulk method and compared to the directly measured sensible heat flux. The profile and the bulk method gave reliable results as long as all data were measured within the surface layer and radiation errors for air–temperature data were small. The bulk method yielded better results than the profile method in periods with high values of upwelling shortwave radiation. All measurements conducted outside the surface layer, which was frequently shallow in 1998, were unusable for the profile method. Similarly, the eddy–covariance method produced unreliable results if the instrument was operating outside the surface layer. In such a case, however, the bulk method produced at least a minimal estimate for the sensible heat flux. None of the methods yielded reasonable results for all meteorological conditions. This aspect should be noted when seeking new methods to improve the calculation of sensible heat flux in GCMs.     

Vertical exchange due to horizontal density gradients in lakes; the case of Lake Lucerne

Recent field investigations have shown that differential mixing causes a significant density driven exchange between the two eastern basins of Lake Lucerne, Gersauersee and Urnersee. The long term vertical mixing characteristics during the winter mixing period and the influence of the resulting exchange flow on water quality are examined through the analysis of ten years (1964 to 1974) of monthly limnological data. Vertical homogenization of the state variables (temperature, electric conductivity and density) occurred on average once every two years in Urnersee, but not once in Gersauersee where the ten year average winter mixed-layer depth extended to 120 m. In Urnersee intense mixing was evident over the whole water column for every year. In contrast intense mixing in the deeper layers of Gersauersee occurred approximately once every four years. A three layer model shows that theT/ ₂₀ signature of the Gersauersee intermediate water correlates best with the Urnersee deep water confirming the regular occurrence of a density driven exchange. For the lower layers the oxygen consumption rate in Urnersee was approximately twice that for Gersauersee. It appears the exchange flow can act either as a source or sink for the oxygen balance of Urnersee deep water. The larger rate in Urnersee hypolimnion might also be associated with the larger sediment input to this system. Density driven exchange resulting from differential mixing is probably an important contribution to the vertical water replenishment in many lakes.     

Temperature-jump induced cation exchange kinetics in (Co<Subscript>0.1</Subscript>Mg<Subscript>0.9</Subscript>)<Subscript>2</Subscript>SiO<Subscript>4</Subscript> olivine: an in situ optical spectroscopic study

In the olivine crystal structure, cations are distributed over two inequivalent octahedral sites, M1 and M2. Kinetics of cation exchange between the two octahedral sites in (Co_0.1Mg_0.9)₂SiO₄ single crystal have been studied in the temperature range from 600 to 800°C by monitoring the time evolution of the absorbance of Co²⁺ ions in M1 or M2 sites using optical spectroscopy after rapid temperature jumps. It was found from such temperature-jump induced relaxation experiments that with increasing temperature the absorbance of Co²⁺ ions in the M1 site decreases while that in the M2 site increases. This indicates a tendency of Co²⁺ cations to populate the M2 site with increasing temperatures and vice versa. The experimental relaxation data can be modeled using a triple exponential equation based on theoretical analysis. Activation energies of 221 ± 4 and 213 ± 10 kJ/mol were derived from relaxation experiments on the M2 site and M1 site, respectively, for the cation exchange processes in (Co_0.1Mg_0.9)₂SiO₄ olivine. Implications for cation diffusion at low temperatures are discussed.     

The sensitivity of ECHAM4/ML to a double CO2 scenario for the Late Miocene and the comparison to terrestrial proxy data

For the Tortonian, Steppuhn et al. [Steppuhn, A., Micheels, A., Geiger, G., Mosbrugger, V., 2006. Reconstructing the Late Miocene climate and oceanic heat flux using the AGCM ECHAM4 coupled to a mixed-layer ocean model with adjusted flux correction. Palaeogeography, Palaeoclimatology, Palaeoecology, 238, 399–423] perform a model simulation which considers a generally lower palaeorography, a weaker ocean heat transport and an atmospheric CO₂ concentration of 353 ppm. The Tortonian simulation of Steppuhn et al. [Steppuhn, A., Micheels, A., Geiger, G., Mosbrugger, V., 2006. Reconstructing the Late Miocene climate and oceanic heat flux using the AGCM ECHAM4 coupled to a mixed-layer ocean model with adjusted flux correction. Palaeogeography, Palaeoclimatology, Palaeoecology, 238, 399–423] demonstrates some realistic trends: the high latitudes are warmer than today and the meridional temperature gradient is reduced. However, the Tortonian run also indicates some insufficiencies such as too cool mid-latitudes which can be due to an underestimated pCO₂ in the atmosphere. As a sensitivity study, we perform a further model experiment for which we additionally increase the atmospheric carbon dioxide (700 ppm). According to this CO₂ sensitivity experiment, we find a global warming and a globally more intense water cycle as compared to the previous Tortonian run. Particularly the high latitudes are warmer in the Tortonian CO₂ sensitivity run which leads to a lower amount of Arctic sea ice and a reduced equator-to-pole temperature difference. Our Tortonian CO₂ sensitivity study basically agrees with results from recent climate model experiments which consider an increase of CO₂ during the next century (e.g. [Cubasch, U., Meehl, G.A., Boer, G.J., Stouffer, R.J., Dix, M., Noda, A., Senior, C.A., Raper, S., Yap, K.S., 2001. Projections of Future Climate Change. In: Houghton, J.T., Y. Ding, D.J. Griggs, M. Noguer, P.J. van der Linden, X. Dai, K. Maskell, C.A. Johnson (eds.), Climate Change 2001: The Scientific Basis. Contribution of Working Group I to the Third Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge University Press, Cambridge, 525–582]) suggesting that the climatic response on a higher atmospheric CO₂ concentration is almost independent from the different settings of boundary conditions (Tortonian versus today). To validate the Tortonian model simulations, we perform a quantitative comparison with terrestrial proxy data. This comparison demonstrates that the Tortonian CO₂ sensitivity experiment tends to be more realistic than the previous Tortonian simulation by Steppuhn et al. [Steppuhn, A., Micheels, A., Geiger, G., Mosbrugger, V., 2006. Reconstructing the Late Miocene climate and oceanic heat flux using the AGCM ECHAM4 coupled to a mixed-layer ocean model with adjusted flux correction. Palaeogeography, Palaeoclimatology, Palaeoecology, 238, 399–423]. However, a high carbon dioxide concentration of 700 ppm is questionable for the Late Miocene, and it cannot explain shortcomings of our Tortonian run with ‘normal’ CO₂. In order to fully understand the Late Miocene climate, further model experiments should also consider the palaeovegetation.     

Significance of sediment transport processes during piedmont floods: the 2005 flood events in Switzerland

A long‐lasting rainstorm event from 20 to 22 August 2005 affected a large part of the northern Alps and Prealps in Switzerland. It resulted in elevated discharges and flooding in many headwater catchments and mountain rivers. The associated geomorphic processes included shallow landslides, deep‐seated slope instabilities, debris flows, and fluvial sediment transport. In many parts of the affected areas human activities are important, including many buildings, traffic lines and other infrastructure. In the steeper parts, geomorphic processes were mainly responsible for flow overtopping and sediment deposition both in and outside of the channel network. In the lower parts, lateral erosion and exceedance of the channel discharge capacity were the main reasons for morphologic channel modification and flooding. Sediment‐related processes contributed a lot to the overall damage. Copyright © 2015 John Wiley & Sons, Ltd.     

The great Sumatra–Andaman earthquakes — Imaging the boundary between the ruptures of the great 2004 and 2005 earthquakes

Segmentation along convergent margins controls earthquake magnitude and location, but the physical causes of segment boundaries, and their impact on earthquake rupture dynamics, are still poorly understood. One aspect of the 2004 and 2005 great Sumatra–Andaman earthquakes is their abrupt termination along a common boundary. This has led to speculation on the nature of the boundary, its origin and why it was not breached.

For the first time the boundary has been imaged and, with newly acquired marine geophysical data, we demonstrate that a ridge on the subducting Indo-Australian oceanic crust may exert a control on margin segmentation. This suggests a lower plate influence on margin structure, particularly its segmentation. The ridge is masked by the sedimentary cover in the trench. Its most likely trend is NNE–SSW. It is interpreted as a fracture zone on the subducting oceanic plate. A ramp or tear along the eastern flank of the subducting fracture zone beneath Simeulue Island may be considered as an intensification factor in terms of rupture propagation barrier.     

Extensional Structures in the Ophiolites from Cuba and China: New Constraints to Slowly‐Spreading Ancient Oceanic Lithosphere

A group of low‐angle normal faults developed in banded gabbro of Moa Ophiolite, Cuba. The dark gabbro was cut into puddings by several normal faults, while light gabbro was just swelling in layer thickness. In Hongliuhe ophiolite at eastern segment of South Tien Shan Suture Zone in China, the extensional deformation concentrates on fine cumulus gabbro which is typically mylonitized. Abundant structural features were discovered in HLH ophiolite such as S‐C foliation, C’ foliation, extensional crenulation cleavage, small toughness normal fault, low‐angle normal faults and high‐angle normal faults. According to the above tectonic phenomenon from the ophiolite belts in Cuba and China, we will get the conclusion: the maximum principal compressive stress (b1) is vertical to cumulus bedding, and the maximum tensile stress (b3) is paralleling to cumulus bedding. Considering of the above evidence, the extensional tectonic event should developed at mid‐ocean ridge. Due to seafloor spreading, the maximum tensile stress is paralleling to cumulus layer, and extensional tectonic is kept in cumulus gabbro. In this way, normal faults developed in dark gabbro, while brittle‐ductile extensional developed in light gabbro. A large number of domes, folds paralleling to ocean ridge and detachment faults represented by low angle normal fault were discovered near ocean ridge in Indian Ocean and Atlantic Ocean. In this way, materials from deep oceanic lithosphere (e.g. gabbro, mantle peridotite) outcrop at the crust surface of ocean basin. The above evidences from China and Cuba are consistent with extensional tectonic and metamorphic core complex from slowly and super‐slowly spreading Indian Ocean and Atlantic Oceanic lithosphere based on ODP. Therefore, extensional deformation in the ophiolite belt is of significant meaning for clarifying the formation process and mechanism of ancient oceanic basin.     

New Olivine Reference Material for In Situ Microanalysis

A new olivine reference material – MongOL Sh11‐2 – for in situ analysis has been prepared from the central portion of a large (20 × 20 × 10 cm) mantle peridotite xenolith from a ~ 0.5 My old basaltic breccia at Shavaryn‐Tsaram, Tariat region, central Mongolia. The xenolith is a fertile mantle lherzolite with minimal signs of alteration. Approximately 10 g of 0.5–2 mm gem quality olivine fragments were separated under binocular microscope and analysed by EPMA, LA‐ICP‐MS, SIMS and bulk analytical methods (ID‐ICP‐MS for Mg and Fe, XRF, ICP‐MS) for major, minor and trace elements at six institutions world‐wide. The results show that the olivine fragments are sufficiently homogeneous with respect to major (Mg, Fe, Si), minor and trace elements. Significant inhomogeneity was revealed only for phosphorus (homogeneity index of 12.4), whereas Li, Na, Al, Sc, Ti and Cr show minor inhomogeneity (homogeneity index of 1–2). The presence of some mineral and fluid‐melt micro‐inclusions may be responsible for the inconsistency in mass fractions obtained by in situ and bulk analytical methods for Al, Cu, Sr, Zr, Ga, Dy and Ho. Here we report reference and information values for twenty‐seven major, minor and trace elements.     

Tools and cover effects in bedload transport observations in the Pitzbach,Austria

We report bedload data and acoustic impulse measurements due to particle impact from the Pitzbach in Austria. Impulse counts can be viewed as a measure of the energy delivered to the bed by moving particles. Impulse counts show a large scatter even for the same discharge and bedload supply. This scatter is due to varying grain size distribution, grain shape, mode of transport of the sediment particles and spatial and temporal distribution of the sediment load. The mean impulse count at given hydraulic conditions may increase or decrease with increasing sediment supply, suggesting that both tools and cover effects are active on the channel bed. Dependent on the local balance between sediment supply and transport capacity, either effect may be dominant at different locations along the cross‐section at the same time. Furthermore, the same bed location may respond to increasing sediment supply as tools‐dominated at some discharges and cover‐dominated at other discharges. Our observations may have implications for modelling of bedrock erosion in landscape evolution models and of bedrock channel morphology. Erosion models that do not incorporate both tools and cover effects are not sufficient to describe observations. Furthermore, a local erosion law cannot in general be used to describe erosion averaged over the channel cross‐section. The changing balance between sediment supply and transport capacity with increasing discharge highlights that a single representative discharge is not sufficient to capture the full erosion dynamics. Copyright © 2008 John Wiley & Sons, Ltd.     

Variations of daytime and nighttime electron temperature and heat flux in the upper ionosphere,topside ionosphere and lower plasmasphere for low and high solar activity

A database of the electron temperature (T_e) comprising of most of the available LEO satellite measurements is used for studying the solar activity variations of T_e. The T_e data are grouped for two levels of solar activity (low LSA and high HSA), five altitude ranges between 350 and 2000 km, and day and night. By fitting a theoretical expression to the T_e values we obtain variation of T_e along magnetic field lines and heat flux for LSA and HSA. We have found that T_e increases with increase in solar activity at low and mid-latitudes during nighttime at all altitudes studied. During daytime the T_e response to solar activity depends on latitude, altitude, and season. This analysis shows existence of anti-correlation between T_e and solar activity at mid-latitudes below 700 km during the equinox and winter day hours. Heat fluxes show small latitudinal dependence for daytime but substantial for nighttime.