Screening of polymers on selected Hawaii soils for erosion reduction and particle settling

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Once more on quasar periodicities

In an earlier paper Arp, Bi, Chu and Zhu investigated various quasar samples and recognized a periodicity of remarkable degree in them. Their conclusion was that the existence of such a periodicity is a counterevidence against the cosmological origin of quasar redshifts. Since this question is of great importance in a cosmological context, here we reanalyze some of the samples together with a galaxy sample of the pencil-beam survey of Broadhurstet al. Our result is that on the plane of cosmological parameters (₀, ₀) there is a non-negligible region where two quasar samples and the galaxy sample are simultaneously fairly periodic. Pure periodicity is still compatible with cosmological principles, at least on length scales much longer than the period length. So the regularities can fit into a cosmological context.     

Hydrochemical and isotopical tracers in the lacustrine aquifer of the Cerro Prieto area, Baja California, México

A series of patterns in the chemical and isotopic composition of the groundwater of the Cerro Prieto area have been recognized. These patterns were used to define four hydrochemical and isotopical zones in the area. One of these areas located at the east side was found to be the source of recharge, while another in the central part is where an older aquifer exist in lacustrine deposits. The low permeability of the area causes the aquifer to act as an aquitard, which at least is partly surrounded by an interface zone where mixing of waters occurs. Tritium and radiocarbon method revealed that the aquitard is an isolate system whose residence time is of 32 ka.     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.     

Fossil wood

Plants have been making wood (secondary xylem) for more than 370 million years. This familiar material is one of the keys to their massive success. Wood allows plants to attain breathtaking heights and maximize the capture of sunlight for growth. By creating complex, multi‐layered forests, the evolution of wood, has done more to shape life on land than almost any other innovation. Wood is one of the most common terrestrial fossils encountered in the geological record. Whether preserved as huge petrified logs or as minute chunks of charcoal, fossil wood is abundant in rocks of Late Devonian age and younger. It is of enormous scientific importance, shedding light on the identity and stature of ancient trees. As a record of growth over a sustained period, it also tells us much about the climates and environments in which those trees lived. In this article, I explain some aspects of the origin, evolution, preservation, and identification of fossil wood, and emphasise its great significance for geology.