Geochemistry of a sediment push-core from the Lucky Strike hydrothermal field,Mid-Atlantic Ridge

Hydrothermal sediment mineralogy and geochemistry can provide insights into seafloor mineralization processes and changes through time. We report a geochemical investigation of a short (22 cm) near-vent hydrothermal metalliferous sediment core from the Lucky Strike site (LS), on the Mid-Atlantic Ridge (MAR). The sediment was collected from the base of an active white smoker vent and comprises pure hydrothermal precipitates, mainly chalcopyrite, sphalerite, pyrite and barite, with negligible detrital and biogenic inputs. Geochemically, the core is enriched in elements derived from high-temperature hydrothermalism (Fe, Cu, Zn and Ba) and depleted in elements derived from low-temperature hydrothermalism (Mn), and metasomatism (Mg). The U/Fe content ratio is elevated, particularly in the deeper parts of the core, consistent with uptake from seawater associated with sulphide alteration. Rare earth elements (REE) concentrations are low and chondrite-normalized patterns are characteristic of high-temperature vent fluids with an enrichment in light REE and a pronounced positive Eu anomaly. A stronger positive Eu anomaly associated with higher La_n/Sm_n at the core top is controlled by barite precipitation. The hydrothermal influence on the REE decreases downcore with some evidence for a stronger seawater influence at depth. Nd isotopes also exhibit an increased detrital/seawater influence downcore. Pb isotope ratios are uniform and plot on the Northern Hemisphere Reference Line in a small domain defined by LS basalts and exhibit no detrital or seawater influence. Lucky Strike sediments are derived from high-temperature mineralization and are overprinted by a weak seawater–sediment interaction when compared with other Atlantic hydrothermal sites such as TAG. The larger seawater input and/or a larger detrital contribution in deeper layers can be explained by variable hydrothermal activity during sediment formation, suggesting different pulses in activity of the LS hydrothermal system.     

Performance-based design optimization of embankments resting on soft soil improved with T-shaped and conventional DCM columns

Acta Geotechnica - This paper presents a parametric study of the optimization design for T-shaped deep cement mixing (TDM) and conventional deep cement mixing (DCM) columns improved soft soil for...     

Impact of constitutive models on the numerical analysis of underground constructions

The constitutive model frequently used in numerical calculations of tunnel excavation is linear-elastic perfectly plastic with a Mohr–Coulomb (MC) failure criterion. Generally, this leads to shallower and wider surface settlement troughs than those observed experimentally. It is therefore necessary to use adapted constitutive models for the design of underground works. In this paper, three constitutive models are implemented in a two-dimensional simulation of an underground excavation in plane strain: a linear-elastic perfectly plastic model (the MC model), an elastoplastic model with isotropic hardening [the hardening soil (HS) model, Schanz et al., Beyond 2000 in computational geotechnics, Balkema, Rotterdam, pp. 281–290, 1999] and an extension of this model which implies an evolution of the stiffness modulus in the small-strain range according to the strain level (the HS model with small-strain stiffness “HS-Small”, Benz, Small-strain stiffness of soils and its numerical consequences. Ph.D. thesis, Universitat Stuttgart, 189 pp., 2007). The study is based on the results of drained triaxial compression tests representing an overconsolidated clay (Gasparre, Advanced laboratory characterisation of London clay. Ph.D. thesis, Imperial College London, 598 pp., 2005); and is then applied to a shallow tunnel. The impact of the constitutive model is highlighted as well as the limits of the simplest constitutive model.     

Tidal changes in estuarine systems induced by local geomorphologic modifications

Although rising global sea levels will affect the estuarine flooded areas over the coming decades, the local and regional-scale processes will also induce important changes in these coastal systems. The main aim of this work is to investigate possible tidal changes in estuarine systems induced by local geomorphologic modifications, analysing the particular case of Ria de Aveiro which is in risk of inundation. Located in the Portuguese west coast, this tidally driven lagoon has a large area of mostly abandoned salt pans, which are in progressive degradation caused by the lack of maintenance and by the strong currents which erode their protective walls.     

The 9th of July 1998 Faial Island (Azores,North Atlantic) seismic sequence

The Faial earthquake (M _L 5.8) that occurred on the 9th of July, 1998, in the Azores region (north Atlantic), caused nine casualties and severe destruction affecting more than 5,000 people. The main shock was located at sea, 10 km NE of the Faial Island, and triggered a seismic sequence that lasted for several weeks and was characterized by an unusual high p-value of 1.40 for the modified Omori law. We present here the results of a joint inversion of hypocenters and 1D velocity model performed on the data collected by the permanent network complemented with a temporary network installed shortly after the occurrence of the main event. The 1D velocity model shows a heterogeneous upper crust, testified by the observed differences in site effects at the stations, while the middle crust from ∼2.5 to 8 km in depth is quite homogeneous. The Moho is located at a depth of about 12–13 km and the Vp/Vs ratio is found to be around 1.78. The events at depth are mainly concentrated in the middle-lower crust (8–12 km), while their spatial distribution shows a main cluster, visible after relocation, SSE trending. This direction of elongation is consistent with one of the fault planes (N151°E) of the centroid moment tensor (CMT) solution for the main shock. The same plane is the preferred main shock fault plane inferred after a Coulomb failure function analysis on the aftershock distribution. The main event relocation points to a focal depth shallower than 5 km. The aftershocks pattern shows that several fault systems were reactivated by the stress perturbation induced by the main shock. Besides the two main tectonic directions, trending WNW–ESE and NNW–SSE, observed in the tectonics of Faial, Pico, and S. Jorge, there is also evidence of a new tectonic direction trending WSW–ENE.     

Electromagnetic profiling interpretation across vertical faults and dikes

When a vertical fault or dike scatters a normally incident TE-mode plane wave, the horizontal components of the electric and the magnetic fields vary along the direction perpendicular to the strike. This scattering is also responsible for the formation of a vertical component of the magnetic field, which also varies along the direction perpendicular to the strike. Analysis of the lateral variations of the field components permits the identification of the type of geological structure, either fault or dike, as well as an estimate of the position of the geological contacts and the electrical conductivity of each medium. Previous exact analytical solutions have shown that two Fourier cosine integrals can express each field component. A series of functions specified for each model represent the kernel of each integral. From the field components obtained from the first non-zero term of each series, we calculated the following functions: the dip angle and the ellipticity of the vertical polarization ellipse in a plane perpendicular to the strike of the structure, and the azimuth and the ellipticity of the horizontal ellipse. We established master-curves of these functions for the interpretation of vertical faults and dikes for the polarization ellipsoid, for instance VLF or audio-frequency methods. This representation has as variable the induction number     , and as parameters σ ₂/ σ ₁ and     , where a denotes the half-thickness of the dike. The interpretation procedure using curve fitting is possible because the induction number is represented on a logarithmic scale. This procedure represents an important step before automatic interpretation is carried out. Two case histories using field data illustrate the effectiveness of the procedure and the type of quantitative interpretation obtained from it.     

Tangled up in folds: tectonic significance of superimposed folding at the core of the Central Iberian curve (West Iberia)

The amalgamation of Pangea during the Carboniferous produced a winding mountain belt: the Variscan orogen of West Europe. In the Iberian Peninsula, this tortuous geometry is dominated by two major structures: the Cantabrian Orocline, to the north, and the Central Iberian curve (CIC) to the south. Here, we perform a detailed structural analysis of an area within the core of the CIC. This core was intensively deformed resulting in a corrugated superimposed folding pattern. We have identified three different phases of deformation that can be linked to regional Variscan deformation phases. The main collisional event produced upright to moderately inclined cylindrical folds with an associated axial planar cleavage. These folds were subsequently folded during extensional collapse, in which a second fold system with subhorizontal axes and an intense subhorizontal cleavage formed. Finally, during the formation of the Cantabrian Orocline, a third folding event refolded the two previous fold systems. This later phase formed upright open folds with fold axis trending 100° to 130°, a crenulation cleavage and brittle–ductile transcurrent conjugated shearing. Our results show that the first and last deformation phases are close to coaxial, which does not allow the CIC to be formed as a product of vertical axis rotations, i.e. an orocline. The origin of the curvature in Central Iberia, if a single process, had to be coeval or previous to the first deformation phase.     

Discrete element modelling of a granular platform supported by piles in soft soil – Validation on a small scale model test and comparison to a numerical analysis in a continuum

This paper focuses on the mechanisms taking place in a granular platform supported by piles in soft soil. Several modelling approaches were explored. A two-dimensional small scale model test using the Taylor–Schneebeli soil analogue was first developed and the experimental results were compared to a discrete element model using the particle code PFC. The validation of this numerical approach allowed the parametric study to be extended numerically. Parametric studies were also performed on continuum model using the finite-difference code FLAC. Comparison of the parametric studies performed on each modelling approach underlined some differences and lead to a consideration on the macro- and micromechanical parameters.     

What causes the spread of model projections of ocean dynamic sea-level change in response to greenhouse gas forcing?

Sea levels of different atmosphere–ocean general circulation models (AOGCMs) respond to climate change forcing in different ways, representing a crucial uncertainty in climate change research. We isolate the role of the ocean dynamics in setting the spatial pattern of dynamic sea-level (ζ) change by forcing several AOGCMs with prescribed identical heat, momentum (wind) and freshwater flux perturbations. This method produces a ζ projection spread comparable in magnitude to the spread that results from greenhouse gas forcing, indicating that the differences in ocean model formulation are the cause, rather than diversity in surface flux change. The heat flux change drives most of the global pattern of ζ change, while the momentum and water flux changes cause locally confined features. North Atlantic heat uptake causes large temperature and salinity driven density changes, altering local ocean transport and ζ. The spread between AOGCMs here is caused largely by differences in their regional transport adjustment, which redistributes heat that was already in the ocean prior to perturbation. The geographic details of the ζ change in the North Atlantic are diverse across models, but the underlying dynamic change is similar. In contrast, the heat absorbed by the Southern Ocean does not strongly alter the vertically coherent circulation. The Arctic ζ change is dissimilar across models, owing to differences in passive heat uptake and circulation change. Only the Arctic is strongly affected by nonlinear interactions between the three air-sea flux changes, and these are model specific.

     

Sources of organic carbon in the Portuguese continental shelf sediments during the Holocene period

Organic C (OC) and total N (TN) concentrations, and stable isotope ratios (δ¹³C) in muddy deposit sediments of the Northern and Southern Portuguese continental shelf were used to identify sources of fine-sized organic matter (<63 μm) during the Holocene period. Sedimentary columns off the Guadiana (core CRIDA 05), Tagus (core MD 992332) and Douro (core KSGX 57) estuaries are characterised by elemental and isotopic values that reflect distinct sources of organic matter (OC/TN and δ¹³C ranging, respectively, from 8.5 to 21 and from −22.4‰ to −27‰). Intense supplies to the Guadiana continental shelf of fine terrigenous particles during the Younger-Dryas Event are closely linked with higher OC/TN values and lower δ¹³C ratios. During the postglacial transgression phase, an increasing contribution of marine supplies (up to 80%) occurred. Higher δ¹³C (up to −22.4‰) values and low OC/TN ratios (down to 8.5) are found as the sea level approaches the current one. The Upper Holocene records emphasize the return to enhanced terrestrial supplies except for the Little Climatic Optimum between the 11th and 15th centuries AD. This climatic event is especially obvious in the three cores as a return to marine production and a decrease in terrestrial sediment supply to the continental shelf. The return to a cooling event, the Little Ice Age, between the 15th and 19th centuries AD, is mirrored by decreased terrigenous supplies in core KSGX 57. Gradually increasing sedimentation in estuaries, as well as formation of coastal dune fields, have been hypothesized on the basis of increasing δ¹³C and decreasing OC, TN and OC/TN values.