Experimental study of strong reflection of regular water waves over submerged breakwaters in tandem

A series of laboratory experiments was carried out to investigate the strong reflection of regular water waves over a train of submerged breakwaters. Rectangular and trapezoidal shapes of submerged breakwaters are employed and compared for reflecting capability of incident waves. Measured reflection coefficients of regular waves over impermeable submerged breakwaters are verified by comparing with those of the eigenfunction expansion method. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The trapezoidal shape is recommended for a submerged breakwater in terms of reflecting capability and practical application.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Evaluation of the ocean governance system in Korea

Considering the small land, dense population and poor natural resources, the oceans are important to Korea, but the recognition of oceans has been weak in Korean society. So ocean governance was fragmented in both institution and policies, which resulted in serious problems in the coastal waters and oceans. However, a series of maritime accidents and failures of policies increased the recognition of the coastal waters and resources and led to the establishment of one single ocean-related governmental agency in 1996. Over the last decade, the ocean governance in Korea has been successful and strong.     

Bragg resonant reflection of carrier waves composing wave groups

Numerical analyses for the Bragg resonant reflection of carrier waves associated long waves due to sinusoidally varying seabeds are performed by using a set of coupled ordinary differential equations derived from the Boussinesq equations. The Boussinesq equations are firstly approximated with the Fourier decomposition. The coupled governing equations are then derived and used to simulate evolution of both short and long wave components. It is also found that wave groups are generated by two carrier waves with slightly different frequencies. The wave energy of the initial wave components is transferred to other harmonic components during propagation over a long distance. Evolution and reflection of both short and long waves were largely affected by nonlinearity.     

Species composition and spatial distribution of euphausiids of the yellow sea and relationships with environmental factors

We investigated species composition and spatial distribution of the euphausiid community in the Yellow Sea and identified the relationship with environmental factors (temperature, salinity, chlorophyll a, nitrate, phosphate, and silicate) using bimonthly data from June, 1997 to April, 1998. The environment varied during the sampling period. In warm seasons, thermocline was well developed rendering lower temperature and higher salinity and nutrient concentrations in the bottom layer. During cold seasons the water column was well mixed and no such vertical stratification was noted. Horizontal distribution of temperature, however, differed slightly between near-coast and offshore areas because of the shallow depth of the Yellow Sea, and between southern and northern areas because of the intrusion of water masses such as Yellow Sea Warm Current and Changjiang River Diluted Water. Four euphausiid species were identified:Euphausia pacifica, E. sanzoi, Pseudeuphausia sp. andStylocheron affine. E. sanzoi andS. affine were collected, just one juvenile each, from the southern area in June and December, respectively.Pseudeuphausia sp. were collected in the eastern area all the year round except June.E. pacifica occurred at the whole study area and were the predominant species, representing at least 97.6% of the euphausiid abundance. Further, the distribution pattern of the species was varied in regards to developmental stages (adult, furcilia, calyptopis, egg). From spring to fall,E. pacifica adults were abundant in the central area where the Yellow Sea Bottom Cold Water prevailed. Furcilia and calyptopis extended their distribution into nearly all the study area during the same period. From late fall to winter, adults were found at the near-coastal area with similar pattern for furcilia and calyptopis. The distribution pattern ofE. pacifica was consistent regarding temperature, salinity, and three nutrients during the sampling period, whereas chlorophyll a showed a different pattern according to the developmental stages. The nutrients should indirectly affect via chlorophyll a and phytoplankton concentration. With respect to these results, we presented a scenario about how the environmental factors along with the water current affect the distribution ofE. pacifica in the Yellow Sea.     

The origin and biogeochemistry of organic matter in surface sediments of Lake Shihwa and Lake Hwaong

To understand the origin and biogeochemistry of the organic matter in surface sediments of Lake Shihwa and Lake Hwaong, organic nitrogen, inorganic nitrogen, labile organic carbon, and residual organic carbon contents as well as stable isotope ratios for carbon and nitrogen were determined by KOBr-KOH treatment. Ratios of organic carbon to organic nitrogen (C_org/N_org) (mean = 24) were much higher than ratios of organic carbon to total nitrogen (C_org/N_tot) (mean=12), indicating the presence of significant amounts of inorganic nitrogen in the surface sediments of both lakes. Stable isotope ratios for organic nitrogen were, on average, 5.2‰ heavier than ratios of inorganic nitrogen in Lake Shihwa, but those same ratios were comparable in Lake Hwaong. This might be due to differences in the origin or the degree of degradation of sedimentary organic matter between the two lakes. In addition, stable isotope ratios for labile organic carbon were, on average, 1.4‰ heavier than those for residual organic carbon, reflecting the preferential oxidation of¹³C-enriched organic matter. The present study demonstrates that KOBr-KOH treatment of sedimentary organic matter can provide valuable information for understanding the origin and degradation state of organic matter in marine and brackish sediments. This also suggests that the ratio of C_org/N_org and stable isotope ratios for organic nitrogen can be used as indexes of the degree of degradation of organic matter.     

Modeling study of the effects of the coagulation kernel with van der Waals forces and turbulence on the particle size distribution

In this study, variations in the size distributions due to different assumptions for the coagulation kernel are investigated. In order to evaluate how the coagulation kernel influences the form of the particle size distribution and to describe the process of the Brownian coagulation, the Brownian coagulation kernel, including the van der Waals forces, is compared with the most frequently used coagulation coefficients. Retardation should be considered for interparticle interactions for particles larger than 1μm radius. However, for particle sizes larger than 0.1 μm, the Brownian kernel is not dominant, so the retardation effect can be ignored. The inclusion of the van der Waals forces in the Brownian coagulation kernel caused a faster coagulation process in the small particle size range. Taking account of the turbulent coagulation kernel, the turbulent coagulation kernel becomes more important when the turbulent intensity is higher. The turbulent coagulation kernel affects the large particle size range and ignoring the turbulent coagulation kernel will lead to overestimation of particle number concentration in model simulation. The results of this study indicate that the inclusion of van der Waals forces or the turbulent coagulation kernel in the total coagulation kernel impacts on the modeled particle size distributions and total particle number concentration.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.