Patos Lagoon outflow within the Río de la Plata plume using an airborne salinity mapper: Observing an embedded plume

Major river systems discharging into continental shelf waters frequently form buoyant coastal currents that propagate along the continental shelf in the direction of coastal trapped wave propagation (with the coast on the right/left, in the northern/southern hemisphere). The combined flow of the Uruguay and Paraná Rivers, which discharges freshwater into the Río de la Plata estuary (Lat. ∼36°S), often gives rise to a buoyant coastal current (the ‘Plata plume’) that extends northward along the continental shelf off Uruguay and Southern Brazil. Depending upon the prevailing rainfall, wind and tidal conditions, the Patos/Mirim Lagoon complex (Lat. ∼32°S) may also produce a freshwater outflow plume that expands across the inner continental shelf. Under these circumstances the Patos outflow plume can be embedded in temperature, salinity and current fields that are strongly influenced by the larger Plata plume. The purpose of this paper is to present observations of such an embedded plume structure and to determine the dynamical characteristics of the ambient and embedded plumes.     

Instability of exogenous lava lobes during intense rainfall

On many volcanoes, there is evidence of a relationship between dome collapse and periods of high precipitation. We propose a mechanism for this relationship and investigate the conditions that optimize failure by this process. Observations of elongate lobes that evolve through exogenous growth of lava domes reveal that they commonly develop tensile fractures perpendicular to the direction of motion. These cracks can increase in depth by localized cooling and volumetric contraction. During periods of high rainfall, water can fill these cracks, and the increase in fluid pressure on the base of the lobes and within the crack can trigger the collapse of the hot exogenous lava domes. Using limit-equilibrium analysis, it is possible to calculate the water and vapor forces acting on the rear and base of the potentially unstable part of the lobe. The model presented is rectangular in cross-section, with material properties representative of andesitic dome rocks. Vapor pressures at the base of cracks are sealed by the penetrating rainfall, which forms a saturated cap within the lobe. This leads to an increase in fluid pressurization both through the underlying gas pressure and the downslope component of the liquid water cap. Fluid pressurization increases as the penetration depth increases. This rainfall penetration depth is dependent on the thermal properties of the rocks, antecedent temperature, lobe geometry, and the intensity and duration of precipitation. Dominant parameters influencing the stability of the lobe are principally lobe thickness, duration and intensity of rainfall, and antecedent lobe temperature. Our modeling reveals that thicker lobes are intrinsically more unstable due to the amplification of downslope forces in comparison to cohesive strength. The increase in the duration and intensity of rainfall events also increases the potential for collapse, as it leads to deeper liquid penetration. Deeper penetration depths are also achieved through lower antecedent temperatures since less fluid is lost through vaporization. Thus, the potential for rain-triggered collapse increases with time from emplacement.Editorial responsibility: D. Dingwell     

The paleobiogeographical significance of the Silurian and Devonian trilobites of Japan

Six major groups of trilobites from the Silurian and Devonian of Japan are evaluated for their paleobiogeographical signature. Silurian illaenids and scutelluids show four generic‐level and at least two species‐level links with the Australian segment of the Gondwana paleocontinent; encrinurids also indicate two generic‐level links with Australia and also the South China paleocontinent; whilst Devonian phacopids, and possibly proetids, suggest at least two generic‐level links with the North China paleocontinent. These different patterns may reflect the fragmentary biostratigraphical record of Japanese trilobites, but they also appear to reflect paleoenvironmental parameters associated with lithofacies, and paleoecology. Thus, Japanese assemblages of proetids and phacopids occurring in deep‐water clastic lithofacies have counterparts in similar settings in North China, and Japanese scutelluids and illaenids are strongly associated with shallow marine carbonate lithofacies that are similar to those of their occurrences in Australia. Japanese encrinurids occur in carbonate rocks indicative of shallow marine settings in the Kurosegawa Terrane, and they demonstrate a consistent paleobiogeographical affinity with Australia and South China. Larval ecology cannot be directly assessed for Japanese trilobite groups. However, proetids have consistently been shown to have planktonic protaspides, whereas illaenids, scutelluids, and encrinurids have benthic protaspides. Planktonic protaspides would have a greater propensity for distribution in ocean currents than benthic ones, and therefore may be of more limited paleobiogeographical utility. The combined data from the six different groups indicates that the complex paleobiogeographical patterns of the Japanese trilobite assemblages need to be interpreted with caution, and similarity of taxa does not necessarily denote paleogeographical proximity to other regions.     

Compaction of a Rock Fracture Moderated by Competing Roles of Stress Corrosion and Pressure Solution

Unusually rapid closure of stressed fractures, observed in the initial stages of loading and at low temperatures, is examined using models for subcritical crack growth and pressure solution. The model for stress corrosion examines tensile stress concentrations induced at the Hertzian contact of propping fracture asperities, and mediates fracture growth according to a kinetic rate law. Conversely, pressure solution is described by the rate-limiting process of dissolution, resulting from the elevated stresses realized at the propping asperity contact. Both models are capable of following the observed compaction of fractures in novaculite. However, closure rates predicted for stress corrosion cracking are orders of magnitudes faster than those predicted for pressure dissolution. For consistent kinetic parameters, predictions from stress corrosion better replicate experimental observations, especially in the short-term and at low temperature when mechanical effects are anticipated to dominate. Rates and magnitudes of both stress corrosion and pressure solution are dependent on stresses exerted over propping asperities. Rates of closure due to stress corrosion cracking are shown to be always higher than for pressure solution, except where stress corrosion ceases as contact areas grow, and local stresses drop below an activation threshold. A simple rate law is apparent for the progress of fracture closure, defined in terms of a constant and an exponent applied to the test duration. For current experimental observations, this rate law is shown to replicate early progress data, and shows promise to define the evolution of transport properties of fractures over extended durations.     

The Zn abundance and isotopic composition of diatom frustules,a proxy for Zn availability in ocean surface seawater

We have developed cleaning methods for extracting diatomopal from bulk marine sediment samples, for measurement of both zinc (Zn) abundance and isotope composition. This cleaning technique was then applied to a set of Holocene core-top samples from the Southern Ocean. The measured δ⁶⁶Zn (reported relative to the JMC_Lyon standard) and Zn/Si ratios from the Southern Ocean diatom_opal samples range from 0.7 to 1.5‰, and from 14 to 0.9 μmol/mol, respectively. The Zn abundance and isotope composition data show a clear correlation with opal burial rates and other oceanographic parameters. In common with previous work, we interpret the systematic changes in the Zn/Si ratio to be linked to the variability in the concentrations of bioavailable Zn in the ambient surface seawater where the diatom opal is formed. This variability is likely to be primarily controlled by the degree to which Zn is taken up into phytoplankton biomass. The observed systematic pattern in the δ⁶⁶Zn compositions of the diatom_opal core-top samples is, similarly, likely to reflect changes in the δ⁶⁶Zn composition of the ambient Zn in the surface waters above the core-top sites, which is progressively driven towards isotopically heavier values by preferential incorporation of the lighter isotopes into phytoplankton organic material. Thus, the systematic relationship between Zn isotopes and abundance observed in the core-top diatom_opal samples suggests a potential tool for investigating the biogeochemical cycling of Zn in the past surface ocean for down-core diatom_opal material. In this respect, it may be possible to test hypotheses that attribute variations in atmospheric CO₂ on glacial–interglacial timescales to the degree to which trace metals limited primary productivity in HNLC zones.     

Composition and origin of clasts and inclusions in the Abee enstatite chondrite breccia

The concentrations of 25 major, minor and trace elements have been determined in four clasts, a metal-rich inclusion and two dark metal-poor inclusions from the Abee enstatite chondrite. The clasts are heterogeneous, displaying 2-fold enrichments or depletions in some elements. The data suggest that there are two generations of metal, one with low, the other with high concentrations of refractory siderophiles. The other elemental patterns can be understood in terms of variations in the abundance of major minerals. We infer that Sc and Mn are located largely in the niningerite ((Fe,Mg)S), V in the troilite (FeS) and rare earth elements in the oldhamite (CaS).Heterogeneities among the clasts are probably primary, resulting from the accretion-agglomeration process, although shock processes in a regolithic setting remain a possibility provided that they were followed by a period of metamorphism sufficient to erase petrologic evidence.In the dark inclusions the concentrations of the rare earths, Eu excepted, are 4 × higher than mean EH levels; this infers enhanced amounts of CaS. The dark inclusions are low in siderophiles, Sc, Mn, K, Na and Al, implying low amounts of metal, niningerite and feldspar. The origin of the dark inclusions is unclear; they do not appear to be the result of a simple, single-stage process.     

Rates of cave and landform development in the Yorkshire Dales from speleothem age data

Uranium-series ages have been obtained for 87 speleothems collected from nine major cave systems in the Craven district of northern England. Large systems such as Ease Gill Caverns, the West Kingsdale caves, and Gaping Gill-Ingleborough Cave, which contain relict high-level tunnels, are found to be older than 350,000 years (the limit of the ²³⁰Th/²³⁴U dating method). There is little evidence to indicate a significant enlargement of these passages since this time. Estimates of the age of Victoria Cave from ²³⁴U/²³⁸U isotopic ratios suggest that the cave has been fully relict for more than 500,000 years. Ages of in situ speleothems immediately adjacent to local base level cave streams show that mean maximum downcutting rates in limestone channels are about 2 to 5 cm 1000 yr. These rates are significantly lower than those obtained from direct measurements on limestone bedrock in stream channels but are comparable to areal denudation rates based on solute budgets. Using the present elevation of caves with respect to adjacent valley floor levels, mean maximum valley entrenchment rates are found to range between 5 cm/ky and < 20cm/ky, which corresponds to 6 m to < 24 m of lowering per glacial/interglacial cycle. These rates suggest that upper beds of the limestone were incised to form the Yorkshire Dales between 1 and 2 million years ago. The results indicate that the erosional effects of individual glaciations are not as severe as previously proposed in the literature.     

AstroGrid: A place for your science

Nicholas A Walton, Silvia Dalla, Eduardo Gonzalez-Solarez, Anita Richards and Jonathan Tedds show off the fast-developing astronomical applications of the UK's virtual observatory service.     

On the modelling of sand bedforms using the semivariogram

This study shows the usefulness of the semivariogram for modelling sand ripples created by water flows of varied flow intensity. A combination of two mathematical functions is fitted to each sample semivariogram, that is an exponential (or stochastic) component and a periodic component. The parameters of each of these components have direct physical meaning. A non-dimensional ratio combining the two parameters of the exponential model is interpreted as a regularity index (which increases with the degree of regularity of bedform arrangement). This regularity index is inversely related to the Froude number of the flow. The non-dimensional wavelength, estimated from the dominant periodic function, is also inversely and closely related to the Froude number. The wave height, accurately estimated from properties of the two fitted components, is a direct function of flow velocity and is also proportional to the standard deviation of bed elevations. The bedform shape introduces a considerable discrepancy between the generally assumed normal frequency distribution and the empirical distributions of bed height. The series of bed elevations are generally characterized by a mixture of normal distributions having the same variance but different means. The calculation of a covariance assuming a constant and single mean (as in spectral analysis) can therefore be misleading and the problem may be avoided by using the semivariogram.