Stable 85Rb micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

We describe the microfabrication of ⁸⁵Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm³ internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ⁸⁵Rb D1 transition with proper broadening and the corresponding coherent population trapping (CPT) resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock (CSAC) based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1×10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.     

Spatial–temporal distribution of phytoplankton pigments in relation to nutrient status in Jiaozhou Bay,China

We conducted studies of phytoplankton and hydrological variables in a semi-enclosed bay in northern China to understand the spatial–temporal variability and relationship between these variables. Samples were collected during seven cruises in Jiaozhou Bay from November 2003 to October 2004, and were analyzed for temperature, nutrients and phytoplankton pigments. Pigments from eight possible phytoplankton classes (Diatoms, Dinoflagellates, Chlorophyceae, Prasinophyceae, Chrysophyceae, Haptophyceae, Cryptophyceae and Caynophyceae) were detected in surface water by high performance liquid chromatography (HPLC). Phytoplankton pigment and nutrient concentrations in Jiaozhou Bay were spatially and temporally variable, and most of them were highest in the northern and eastern parts of the sampling regions in spring (May) and summer (August), close to areas of shellfish culturing, river estuaries, dense population and high industrialization, reflecting human activities. Chlorophyll a was recorded in all samples, with an annual mean concentration of 1.892 μg L⁻¹, and fucoxanthin was the most abundant accessory pigment, with a mean concentration of 0.791 μg L⁻¹. The highest concentrations of chlorophyll a (15.299 μg L⁻¹) and fucoxanthin (9.417 μg L⁻¹) were observed in May 2004 at the station close to the Qingdao Xiaogang Ferry, indicating a spring bloom of Diatoms in this area. Although chlorophyll a and other biomarker pigments showed significant correlations, none of them showed strong correlations with temperature and nutrients, suggesting an apparent de-coupling between the pigments and these hydrological variables. The nutrient composition and phytoplankton community composition of Jiaozhou Bay have changed significantly in the past several decades, reflecting the increasing nutrient concentrations and decline of phytoplankton cell abundance. The unchanged total chlorophyll a levels indicated that smaller species have filled the niche vacated by the larger species in Jiaozhou Bay, as revealed by our biomarker pigment analysis.     

马里亚纳海沟挑战者深渊初期多金属氧化物的 矿物学、地球化学特征及其成因环境研究

对大洋27航次在西太平洋马里亚纳海沟挑战者深渊获取的3个多金属氧化物样品进行了X射线矿物衍射分析、穆斯堡尔谱分析及地球化学元素分析,研究其矿物、地球化学特征差异。结果表明,所取样品处于多金属氧化物发育的初始阶段,具有独特的矿物地球化学特征:(1)相较于太平洋CC区及中太平洋海盆获取的多金属结核样品,本研究样品的矿物组成中含有异常高的石英、斜长石以及黏土矿物,而水羟锰矿和钙锰矿含量较低。(2)样品中铁相矿物主要为正方针铁矿(91.6%),另含少量纤铁矿(8.4%),推测是纤铁矿向更加稳定的正方针铁矿衍变的结果。(3)由于样品中深海黏土组分以及氧化物核心物质的混入,加上吸附金属氧化物时间较短,导致SiO₂和Al₂O₃含量均高于正常结核,而Fe、Mn、Cu、Co、Ni等其余金属元素含量较低。(4)由于形成时间较短,样品中稀土元素含量相对较低,ΣREE仅约为0.4×10^-3(一般太平洋CC区及中太平洋结核中稀土含量均大于1.0×10^-3);加之海水氧化还原作用的降低以及研究区海底热液活动的影响,Ce元素未表现出多金属结核中常见的正异常。     

Spatio-temporal variability in sea surface temperatures for the Yellow Sea based on MODIS dataset

The spatio-temporal variabilities in sea surface temperature (SST) were analyzed using a time series of MODIS datasets for four separate regions in the Yellow Sea (YS) that were located along a north-south axis. The space variant temporal anomaly was further decomposed using an empirical orthogonal function (EOF) for estimating spatially distributed SST. The monthly SSTs showed similar temporal patterns in each region, which ranged from 2.4°C to 28.4°C in the study years 2011 to 2013, with seasonal cycles being stronger at the higher latitudes and weaker at the lower latitudes. Spatially, although there were no significant differences among the four regions (p < 0.05) in any year, the geographical distribution of SST was characterized by an obvious gradient whereby SST decreased along the north-south axis. The monthly thermal difference among regions was largest in winter since the SST in the southeast was mainly affected by the Yellow Sea Warm Currents. The EOF1 mode accounted for 56% of the total spatial variance and exhibited a warming signal during the study period. The EOF2 mode accounted for 8% of the total variance and indicated the warm current features in the YS. The EOF3 mode accounted for 6% of the total variance and indicated the topographical features. The methodology used in this study demonstrated the spatio-temporal variabilities in the YS.     

Analytical Theory for One-Dimensional Consolidation of Soil Induced by Time-Dependent Pumping and Loading

Analytical solutions are derived for one-dimensional consolidation induced by time-dependent pumping and loading, in which both the effects of different pumping types and loading conditions are considered, i.e., step pumping, cyclic pumping, constant loading, and step loading. Based on the solutions obtained, some diagrams are prepared and the relevant consolidation behavior of soil is discussed in detail. It has been shown that the consolidation behavior is greatly influenced by pumping velocity, loading pressure, pumping and loading type.     

基于虚拟SAN的网格GIS数据存储技术研究

针对空间数据存储的特点,结合网格和虚拟SAN技术的优势,提出了基于虚拟SAN的网格GIS数据存储解决方案,旨在解决网格GIS环境下的数据存储问题。     

Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.     

PROTEM-37瞬变电磁测深系统及应用实例

PROTEM - 37仪器具有分辨率高、动态范围大、抗干扰能力强、探测深度较大等优良性能。简要介绍了该仪器的测深原理、工作装置、野外施工步骤以及资料的处理解释。对TEM和MT资料的联合反演作了有益的尝试。介绍了该仪器在探测地下洞穴、勘察金属矿以及煤田水文地质调查等方面     

影响湛江的热带气旋自回归分析和预报

利用时间序列的自相关分析,采用逐步回归的统计方法,对影响湛江的热带气旋个数进行了分析,并通过建立预报方程对每年影响湛江的热带气旋进行了预报.实例证明,此方法预报效果良好,实用性强,还具有一定的分析时间序列隐含周期的能力.     

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.