Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

南麂列岛潮间带环境本底调查

本文系根据１９９２年８月和１９９３年２月（夏、冬两季）对南麂列岛潮间带的环境本底调查以及对水质、底质、生物样监测结果的资料整理而成。调查结果表明，潮间带水质、底质除个别断面外，均处于良好状态。生物体重金属残留量全部低于全国海岸带调查时统一的标准，生态环境条件较好。     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低     

Comparison of Drags on Fish Cages of Different Shapes

1 .Introduction Commercial fishfarming in net cages is becoming widespread around the world as an importantsource of food.In PRChina ,mostfishfarmingtakes placeincalmcoastal areas .Fishcages work wellat these sites becausethe environmental forces are usua…     

转“全鱼”溶菌酶基因大菱鲆的研究

用大西洋条鳕(Macrozoarces americanus)抗冻蛋白启动子opAFP promoter和牙鲆(Paralichthys olivaceus)c型溶菌酶基因构建“全鱼”溶菌酶基因元件opAFP—ly，首次应用电脉冲精子介导法将该基因片段导入到大菱鲆(Scophthalmus maximus)受精卵内，获得原代转基因大菱鲆。先后采用单因子方法和正交实验方法，重复实验确定了最适导入条件：脉冲电压为400V／cm，脉冲次数为5，脉冲宽度为25ms，外源DNA浓度为50mg/L。利用最适导入条件，实现基因元件大规模转移。采用PCR技术对1月龄的原代转基因大菱鲆仔鱼的染色体DNA进行分析，结果表明外源基因的整合率可达28％。     

层结流体中的非线性惯性重力内波

根据地球流体力学基本方程组,在密度垂直层结的情况下,引进行波坐标,研究非线性定形波在相平面上的几何拓扑结构。严格论证了不存在定形孤立波,并通过Ｈａｍｉｌｔｏｎ函数及其角作用变把行波系统化成最简形式,由此而得到非线性惯性重力内波的解析解。     

AEL—1型风向,风速仪

本文介绍并叙述了AEL-1型风向、风速仪的设计原理,仪器各部分的电路设计,工作过程及系统软件。该仪器适用于气象台站、工矿企业、海上浮标及科研单位等部门。     

海洋作业渔船管理系统的设计与运行试验

对渔政管理指挥系统建设项日中的业务软件部分渔船管理系统的设计方案进行了介绍。根据我国渔洋作业渔船的实际管理模式，提出了渔船管理系统设计方案。系统通过网络化的业务处理和管理流程，规范渔船建造、审批、登记以及捕捞许可证发放等管理业务，实现渔船控制指标的统一分配，以控制捕捞业发展规模和保护我国的渔业资源。系统以Microsoft VB6．0，Delphi6．0开发，在Window98／2000／XP环境下运行。通过运行试验，对系统运行环境进行了评估，为渔政管理信息化的建设、系统升级提供了经验和技术依据。     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

往复流中双向导向叶冲动透平模型性能试验研究

研制了 30 0双向自调导叶透平试验机组 ,安装在 10 0 0活塞式往复流透平试验台上 ,对两种叶轮方案和 6种不同喷咀、扩压器进行了不同活塞行程、不同周期和不同恒定输出电压下性能试验。试验结果表明在喷咀出口角α1=2 1 5°、扩压器入口角α2 =6 5 5°和α1=2 4°、α2 =6 3°组合最佳 ,最高效率达 5 3 3% ,而且在宽广流量系数范围内 ,特别是大流量系数范围内都有较高效率。大大优于常用对称翼透平。将上下游导叶固定 ,变成双向固定导叶透平。用No 1叶轮和 6种导叶出口角组合进行试验。表明最佳导叶出口角为 2 4°～ 30°,最高效率仍达 38 5 % ,比对称翼透平仍高许多