Direct Assessment of Wood’s Metal Wettability on Quartz

--A tensiometric method (Wilhelmy plate) is used to study Wood's metal dynamic wettability on specially prepared surfaces of quartz single crystals at low velocities of immersion (2 to 16 wm/s). After correction for buoyancy, the force exerted on the plate by the molten metal is used to derive the unit work of wetting n cos Š where n is the Wood's metal surface tension and Š is the interfacial contact angle. Tests at different temperatures (85, 120 and 200°C) show that below 120°C, viscosity effects cannot be neglected. At an immersion/emersion rate of 2 wm/s, n cos Š is in the range 0.417-0.444 N/m at 120°C, and 0.432-0.458 N/m at 200°C. These figures allow the conversion of injection pressures into capillary diameters during Wood's metal injection tests. The method is promising since it may be used in porous materials to check the sensitivity of the unit work of wetting n cos Š to parameters such as roughness and mineralogy, which are known to vary in a wide range within the pores and cracks of rocks.     

Nomogram for the Height of the Daytime Mixed Layer

A method to construct a nomogram of the daytime mixed-layer-height evolution is presented. The nomogram will be specific for a given location and land surface type and is intended to be an easy tool to achieve a general understanding of mixed-layer behaviour. Also it is a pedagogical graphical one-pager that displays the bulk of data that controls the evolution of the mixed layer. Nomograms from northern, central and southern Europe are presented and discussed. Comparison with data from two sites shows good agreement although the nomograms overestimated the mixing height when it was low.     

Evolution of the seismic activity from the 1982 eruption of El Chichon Volcano, Chiapas, Mexico

 We analyzed more than 1700 earthquakes related to the 1982 eruption of El Chichon volcano in southern Mexico. The data were recorded at specific periods throughout the whole eruptive interval of March to April 1982, by three different networks. The seismic activity began several months before the first eruption on 28 March. During this period the seismicity consisted of hybrid and long-period shallow earthquakes most likely related to processes of faulting, fracturing, and fluid movement underneath the volcano. The foci of events occurring before the eruption circumscribe an aseismic zone from approximately 7 to 13 km below the volcano. After the eruption, the seismic activity consisted of tectonic-type earthquakes that peaked at 1200 events/h. This later activity occurred over a wide range of depths, mostly between 5 and 20 km, that includes the former aseismic zone and is roughly limited by the major tectonic faults in the area. Received: 19 May 1998 / Accepted: 13 June 1999     

Long-term simulations of thermal and hydraulic characteristics in a mountain massif: The Mont Blanc case study, French and Italian Alps

 The use of hydrothermal simulation models to improve the prediction of water inflows in underground works during drilling is tested in the Mont Blanc tunnel, French and Italian Alps. The negative thermal anomaly that was observed during the drilling of this tunnel in 1960 is reproduced by long-term, transient hydrothermal simulations. Sensitivity analysis shows the great inertia of thermal phenomena at the massif scale. At the time of tunnel drilling, the massif had not reached thermal equilibrium. Therefore, a set of simulation scenarios, beginning at the end of the last glacial period, was designed to explain the anomaly encountered in the tunnel in 1960. The continuous cooling of alpine massifs due to infiltration of waters from the surface has occurred for 12,000 years and is expected to continue for about 100,000 years. Comparisons of water-discharge rates simulated in the tunnel with those observed indicate that this hydrothermal method is a useful tool for predicting water inflows in underground works. Received, May 1998 · Revised, March 1999 · Accepted, April 1999     

Detrital chromites in metasediments of the East-Arabian continental margin in the Saih Hatat area: constraints for the palaeogeographic setting of the Hawasina and Semail basins (Oman Mountains)

 In Oman, the convergence between Arabia and Eurasia resulted in the Late Cretaceous overthrusting of oceanic crust and mantle lithosphere onto the Arabian continental margin. During this compressional event, a part of the continental plate was subducted to a depth of more than 60 km (0.5 GPa, 250–350  °C to more than 2.0 GPa, 550  °C) resulting in progressive metamorphism of the continental margin sediments, well exposed in the Saih Hatat tectonic window, northeastern Oman Mountains. We attempt to constrain the possibility of one continuous history of extension (starting along the east Arabian continental margin in the Permian) that was followed by one continuous history of convergence starting at 90 Ma near a dead oceanic ridge. This compression resulted in the observed progressive metamorphism by ophiolite overthrusting onto the continental margin. Constraining arguments are the palaeogeographic setting before ophiolite obduction of the As Sifah units and the Hawasina Complex near Ghurba. Detrital chromites in the Triassic–Cretaceous metasediments of the Hawasina Complex are compared with magmatic Semail chromites, and the whole-rock chemistry of these metasediments and associated metabasites are investigated. In contrast to former hypotheses, differences in the chemical composition between detrital and magmatic chromites, and the probable origin of all detrital chromites in the Hawasina Basin from Permian age oceanic rocks, suggest that the high-pressure metamorphic sediments of As Sifah can be considered as part of the basal deposits of the Hawasina Basin. Received: 1 September 1998 / Accepted: 18 January 1999     

Origin of peraluminous granites and granodiorites, Iberian massif, Spain: an experimental test of granite petrogenesis

The discrimination between potential source materials involved in the genesis of Iberian granites and granodiorites, as well as the role of mantle-crust interactions, are examined using constraints imposed by melting experiments, melting-assimilation experiments and Sr-Nd isotope systematics. The Sr-Nd isotope relationships indicate the existence of different genetic trends in which juvenile mantle materials are involved by different mechanisms: (1) a source trend, traced by a particular evolution of the pre-Hercynian basement and indicating mantle participation at the time of sedimentation; (2) a set of magmatic trends traced by gabbro-tonalite-enclave-granodiorite associations, implying the incorporation of new mantle material at the time of granite generation. These relationships strongly support a pure crustal origin for the peraluminous leucogranites, derived from partial melting of crustal protoliths, and a hybrid origin for the peraluminous granodiorites. These granodiorites are the most abundant granitic rocks of the Central Iberian zone (CIZ) of the Iberian massif, implying that processes of hybridisation by assimilation and/or magma mixing played an important role in granitoid production during the Hercynian orogeny. These hypotheses have been tested by means of melting and assimilation experiments. Melting experiments in the range 800–900 °C and at pressures of 3, 6, 10 and 15 kbar indicate that: (1) several potential source materials such as Bt-Ms gneisses and metagreywackes are suitable for the production of peraluminous leucogranite melts; (2) the melt compositions are always leucogranitic, regardless of pressure; (3) pressure exerts a strong influence on the fertility of the source: experiments at 3 kbar produce more than 20 vol% of melt, compared with less than 5 vol% of melt produced at 10 and 15 kbar and at the same temperature. The melting-assimilation experiments carried out at 1000 °C and 4, 7 and 10 kbar and using a proportion of 50% gabbro and 50% gneiss give high melt proportions (more than 50 vol.%) and noritic residues. These melts have the composition of leucogranodiorites, and overlap with part of the compositional range of peraluminous granodiorites of the Iberian massif. The generation of more mafic granodiorites may be explained by the incorporation of some residual orthopyroxene to the granodiorite magmas. The low solubility of Fe + Mg prevents the generation of granodiorite melts with more than 3 wt% of MgO + FeO at all crustal pressures. The large volumes of peraluminous, hybrid granodiorites, produced by assimilation of crustal rocks by mantle magmas, imply that an important episode of crustal growth took place during the Late-Palaeozoic Hercynian orogeny in the Iberian massif. Received: 30 June 1998 / Accepted: 27 November 1998     

Analysis of the institutional and social responses to the eruption and the lahars of Mount Pinatubo volcano from 1991 to 1998 (Central Luzon, Philippines)

Mount Pinatubo volcano erupted in June 1991 in the main island of Luzon belonging to the Philippines archipelago. Huge economic losses and population exodus have followed. This major crisis has been relayed with other crises due to rain-fed lahars which have been supplied with eruption deposits. These lahars have occurred every year since 1991 during the rainy season. They will probably last until 2005. After a brief presentation of the Philippine official response system to disasters, this paper draws up a critical analysis of the different kinds of institutional and social responses deployed to manage the different crisis and post-crisis phases of this event. Based on three viewpoints: from population, media and other actors, this analysis attempts to point out the strengths and weaknesses of the official management system, especially by studying the efficiency and the range of the solutions taken. So, it appears that the management of the June 1991 main crisis (eruption) was a success. On the other hand, difficulties have occurred with lahars risk management. Indeed, these lahars have obliged the authorities to protect and relocate thousands of people. In spite of persistent problems, the management system (monitoring/warning/evacuation) of lahar crises improves year after year. Failures appear especially within the rehabilitation program (protection/rehousing). Many direct (lack of means, preparedness, coordination, dialog, etc.) and indirect (politico-administrative, socio-economic, cultural contexts) factors come together to lock the wheels of the institutional response system. They defer the socio-economic start of this vital northern Philippines area. This revised version was published online in July 2006 with corrections to the Cover Date.     

Shortage in the midst of plenty: Labour strategies in four Central and Eastern European cities

Labour shortage was an integral feature of the communist system of economic management and one that seemed most unlikely to persist in the face of systemic transformation. A casual examination of the unemployment rates that have emerged throughout most of Central and Eastern Europe (CEE) during the course of the past decade might suggest that this early assumption was correct. However, within the region the aggregate rate of joblessness, as well as the behaviour of national output, mask the fact that certain, major urban centres appear to have weathered well the storms caused by exposure to western markets and stringent fiscal and monetary policies. In these centres transformation has meant, to a greater or lesser degree, industrial modernisation and this begs the question of whether the human capital portfolios of the inherited labour force match up to the requirements of the new environment. This paper examines the meaning of the concept of labour shortage and presents the findings from a survey of employers in four leading cities of three major CEE economies designed to elicit if, and how, manpower requirements are being met in the present climate. The results indicate that, somewhat paradoxically, labour shortage persists in the more flexible markets of the post-communist era and that firms do not expect the situation to change radically in the near future. This revised version was published online in July 2006 with corrections to the Cover Date.     

Anisotropy of ionospheric irregularities determined from the amplitude of satellite signals at a single receiver

A new method of determining the anisotropy parameters of small-scale irregularities in the ionospheric F region is presented and experimental results are shown. The method is based on observations of amplitude fluctuations of radio waves transmitted by satellites flying above the F region. In practice, Russian navigational satellites are used and both the amplitude and the phase of the signal is measured on the ground level. The method determines both the field-aligned anisotropy and the field-perpendicular anisotropy and orientation of the spatial spectrum of the irregularities, assuming that the contours of constant power have an elliptic shape. A possibility of applying the method to amplitude tomography is also discussed. Using a chain of receivers on the ground level, one could locate the regions of small-scale irregularities as well as determine their relative intensities. Then the large-scale background structures could be mapped simultaneously by means of ordinary ray tomography using the phase observations, and therefore the relations of small-scale and large-scale structures could be investigated.