Introduction to “Northern Gulf of Mexico ecosystem change and hazards susceptibility”

The northern Gulf of Mexico and its diverse natural resources are threatened by population and development pressure, and by the impacts of rising sea level and severe storms. In the wake of the devastating 2005 hurricane season, and in response to the complex management issues facing the region, the U.S. Geological Survey organized the multidisciplinary “Northern Gulf of Mexico Ecosystem Change and Hazards Susceptibility” project. This special issue of Geo-Marine Letters hosts a few of the early results in the form of 11 papers covering three themes: (1) the control exerted by the underlying geologic framework on geomorphology and nearshore processes and features; (2) impact of human activities on nearshore water quality; and (3) hurricanes and associated effects.     

Phase relations of a natural MARID composition and implications for MARID genesis,lithospheric melting and mantle metasomatism

Melting experiments were performed on a natural mica-amphibole-rutile-ilmenite-clinopyroxene (MARID) sample from the Kaapvaal mantle lithosphere (AJE137) at 20 to 35 kbar and 800 to 1450°C. A solidus was determined at 1260°C and 30 kbar above which phlogopite, clinopyroxene and olivine were stable with an alkali-rich silicate melt. Olivine is the only crystallizing phase just below the liquidus of the AJE137 bulk composition and K-richterite was only stable in the subsolidus region ( 1100°C at 30 kbar). These results are consistent with previous studies in more simple systems. In experiments with 10 wt% added water the solidus was depressed by ca. 300°C and K-richterite was stabilized above this solidus. MARIDs represent a potential lowtemperature component in the lithospheric mantle beneath the Kaapvaal Craton of southern Africa. The addition of > 10 wt% water (with less than a 120°C rise of temperature above the geotherm) to this mantle region would create conditions for the melting of this component. This may then be incorporated in any continental flood basalt parent magma that traverse this lithospheric mantle. The derivation of MARIDs from a silicate melt of their bulk composition, even if water saturated, is considered unlikely as such small degree melts could not sustain the elevated liquidus temperatures required (> 1200°C at 30 kbar) in a cold (< 800°C at 30 kbar) mantle lithosphere. MARID xenoliths may be produced by the interaction of an alkali-rich fluid with a peridotite or as the residue to a group II kimberlitic parent magma that has undergone fractionation of olivine and the exsolution of a carbonatite component.     

Vertical zonation and distributions of calanoid copepods through the lower oxycline of the Arabian Sea oxygen minimum zone

This paper provides the first comprehensive analysis of calanoid copepod vertical zonation and community structure at midwater depths (300–1000 m) through the lower oxygen gradient (oxycline) (0.02 to 0.3 ml/L) of an oxygen minimum zone (OMZ). Feeding ecology was also analyzed. Zooplankton were collected with a double 1 m² MOCNESS plankton net in day and night vertically-stratified oblique tows from 1000 m to the surface at six stations during four seasons as part of the 1995 US Joint Global Ocean Flux Study (JGOFS) Arabian Sea project. The geographic comparison between a eutrophic more oxygenated onshore station and an offshore station with a strong OMZ served as a natural experiment to elucidate the influence of depth, oxygen concentration, season, food resources, and predators on the copepod distributions.Copepod species and species assemblages of the Arabian Sea OMZ differed in their spatial and vertical distributions relative to environmental and ecological characteristics of the water column and region. The extent and intensity of the oxycline at the lower boundary of the OMZ, and its spatial and temporal variability over the year of sampling, was an important factor affecting distributional patterns. Calanoid copepod species showed vertical zonation through the lower OMZ oxycline. Clustering analyses defined sample groups with similar copepod assemblages and species groups with similar distributions. No apparent diel vertical migration for either calanoid or non-calanoid copepods at these midwater depths was observed, but some species had age-related differences in vertical distributions. Subzones of the OMZ, termed the OMZ Core, the Lower Oxycline, and the Sub-Oxycline, had different copepod communities and ecological interactions. Major distributional and ecological changes were associated with surprisingly small oxygen gradients at low oxygen concentrations. The calanoid copepod community was most diverse in the most oxygenated environments (oxygen >0.14 ml/L), but the rank order of abundance of species was similar in the Lower Oxycline and Sub-Oxycline. Some species were absent or much scarcer in the OMZ Core. Two copepod species common in the Lower Oxycline were primarily detritivorous but showed dietary differences suggesting feeding specialization. The copepod Spinocalanus antarcticus fed primarily on components of the vertical particulate flux and suspended material, a less versatile diet than the co-occurring copepod Lucicutia grandis. Vertical zonation of copepod species through the lower OMZ oxycline is probably a complex interplay between physiological limitation by low oxygen, potential predator control, and potential food resources. Pelagic OMZ and oxycline communities, and their ecological interactions in the water column and with the benthos, may become even more widespread and significant in the future ocean, if global warming increases the extent and intensity of OMZs as predicted.     

Oxygen-Containing Compounds Identified in Groundwater from Fuel Release Sites Using GCxGC-TOF-MS

This research continues a 7-year study of oxygen-containing organic compounds present in groundwater at gasoline and diesel fuel release sites that are quantified as diesel-range “total petroleum hydrocarbons” when measured by methods utilizing solvent extraction and gas chromatography. Two-dimensional gas chromatography with time-of-flight mass spectrometry was used to tentatively identify 1162 compounds (TICs) in 113 groundwater samples from 22 sites. Samples were collected from wells either upgradient of the release, within the source zone, or downgradient of the source but still within the plume of dissolved organics associated with release. The names and formulas of all TICs found in samples from each well type are presented and the results from upgradient and downgradient locations are compared in detail. About 60% of the most frequently detected TICs in downgradient wells were also detected in upgradient wells. A majority of these were saturated straight chain alkyl acids, commonly called fatty acids, or fatty acid esters. Of TICs frequently detected in downgradient wells but not upgradient wells, over half were branched alkyl alcohols. Hierarchical cluster analysis results suggest about 80% of the chemical composition of downgradient samples is more similar to upgradient samples than to source area samples. This similarity is due to the presence of the same types of fatty acids and esters. Principal component analysis indicates a continuum of biodegradation between the source area and downgradient samples with the latter becoming more consistent with upgradient samples. Results suggest some TICs may not be petroleum degradation intermediates but compounds synthesized by microorganisms through secondary production and carbon cycling.     

Small Purge Method to Sample Vapor from Groundwater Monitoring Wells Screened Across the Water Table

Groundwater monitoring wells are present at most hydrocarbon release sites that are being assessed for cleanup. If screened across the vadose zone, these wells provide an opportunity to collect vapor samples that can be used in the evaluation of vapor movement and biodegradation processes occurring at such sites. This paper presents a low purge volume method (modified after that developed by the U.S. EPA) for sampling vapor from monitoring wells that is easy to implement and can provide an assessment of the soil gas total petroleum hydrocarbon (TPH) and O₂ concentrations at the base of the vadose zone. As a result, the small purge method allows for sampling of vapor from monitoring wells to support petroleum vapor intrusion (PVI) risk assessment. The small purge volume method was field tested at the Hal's service station site in Green River, Utah. This site is well‐known for numerous soil gas measurements containing high O₂ and high TPH vapor concentrations in the same samples which is inconsistent with well‐accepted biodegradation models for the vapor pathway. Using the low purge volume method, monitoring wells were sampled over, upgradient, and downgradient of the light nonaqueous phase liquid (LNAPL) footprint. Results from our testing at Hal's show that vapor from monitoring wells over LNAPL contained very low O₂ and high TPH concentrations. In contrast, vapor from monitoring wells not over LNAPL contained high O₂ and low TPH concentrations. The results of this study show that a low purge volume method is consistent with biodegradation models especially for sampling at sites where low permeability soils exist in and around a LNAPL source zone.     

Seismic performance of chevron-configured special concentrically braced frames with yielding beams

Current seismic design requirements for special concentrically braced frames (SCBFs) in chevron configurations require that the beams supporting the braces be designed to resist the demands resulting from the simultaneous yielding of the tension brace and degraded, post-buckling strength of the compression brace. Recent research, including large-scale experiments and detailed finite-element analyses, has demonstrated that limited beam yielding is not detrimental to chevron braced frame behavior and actually increases the story drift at which the braces fracture. These findings have resulted in new expressions for computing beam demands in chevron SCBFs that reduce the demand in the tension brace to be equal to the expected compressive capacity at buckling of the compression brace. In turn, the resultant force on the beam is reduced as is the required size of the beam. Further study was undertaken to investigate the seismic performance of buildings with SCBFs, including chevron SCBFs with and without yielding beams and X-braced frames. Prototype three- and nine-story braced frames were designed using all three framing systems, that is, chevron, chevron with yielding beams, and X SCBFs, resulting in six building frames. The nonlinear dynamic response was studied for ground motions simulating two different seismic hazard levels. The results were used to characterize the seismic performance in terms of the probability of salient damage states including brace fracture, beam vertical deformation, and collapse. The results demonstrate that the seismic performance of chevron SCBFs with limited beam yielding performs as well as or better than the conventionally designed chevron and X SCBFs.     

The role of hydrological modelling uncertainties in climate change impact assessments of Irish river catchments

This study attempts to assess the uncertainty in the hydrological impacts of climate change using a multi-model approach combining multiple emission scenarios, GCMs and conceptual rainfall-runoff models to quantify uncertainty in future impacts at the catchment scale. The uncertainties associated with hydrological models have traditionally been given less attention in impact assessments until relatively recently. In order to examine the role of hydrological model uncertainty (parameter and structural uncertainty) in climate change impact studies a multi-model approach based on the Generalised Likelihood Uncertainty Estimation (GLUE) and Bayesian Model Averaging (BMA) methods is presented. Six sets of regionalised climate scenarios derived from three GCMs, two emission scenarios, and four conceptual hydrological models were used within the GLUE framework to define the uncertainty envelop for future estimates of stream flow, while the GLUE output is also post processed using BMA, where the probability density function from each model at any given time is modelled by a gamma distribution with heteroscedastic variance. The investigation on four Irish catchments shows that the role of hydrological model uncertainty is remarkably high and should therefore be routinely considered in impact studies. Although, the GLUE and BMA approaches used here differ fundamentally in their underlying philosophy and representation of error, both methods show comparable performance in terms of ensemble spread and predictive coverage. Moreover, the median prediction for future stream flow shows progressive increases of winter discharge and progressive decreases in summer discharge over the coming century.     

S saturation history of Nain Plutonic Suite mafic intrusions: origin of the Voisey’s Bay Ni–Cu–Co sulfide deposit, Labrador, Canada

The Voisey’s Bay deposit is hosted in a 1.34-Ga intrusion composed of troctolite, olivine gabbro, and ferrogabbro. The sulfide mineralization is associated with magmatic breccias that are enveloped by weakly mineralized olivine gabbros and troctolites, and also occurs as veins along structures in adjacent paragneiss. A dyke is connected to the base of the north wall of the Eastern Deeps Intrusion, and the entry point of this dyke into the chamber is the locus of the Eastern Deeps nickel sulfide deposit. A detailed exploration in the area between the Eastern Deeps and the Ovoid has shown that these intrusions and ore deposits are connected by a splayed dyke. The Eastern Deeps Deposit is surrounded by a halo of moderately to weakly mineralized variable-textured troctolite (VTT) that reaches a maximum thickness above the axis of the Eastern Deeps Deposit along the northern wall of the Eastern Deeps Intrusion. The massive sulfides and breccia sulfides are petrologically and chemically different when compared to the disseminated sulfides in the VTT, and there is a marked break in Ni tenor of sulfide between the two. Sulfides hosted in the dyke tend to have low metal tenors ([Ni]₁₀₀?=?2.5–3.5%), sulfides in Eastern Deeps massive and breccia ores have intermediate Ni tenors ([Ni]₁₀₀?=?3.5–4%), and disseminated sulfides in overlying rocks have high Ni tenors ([Ni]₁₀₀?=?4–8%). Four principal processes control the compositions of the Voisey’s Bay sulfides. Coarse-grained loop-textured ores consisting of pyrrhotite crystals separated by chalcopyrite and pentlandite exhibit a two orders of magnitude variation in the Pd/Ir ratio which is due to mineralogical variations where pentlandite is enriched in Pd and Ir is dispersed throughout the mineral assemblage. A decrease in Ir and Rh from the margin of the Ovoid toward cubanite-rich parts at the central part of the Ovoid is consistent with fractionation of the sulfide from the margins toward the center of the Ovoid. The Ovoid ores have higher Ni and Pd tenor than the Eastern Deeps massive sulfides; this is consistent with both a higher R factor and greater degree of silicate parental magma evolution in the Ovoid than the Eastern Deeps. The disseminated sulfides surrounding the Eastern Deeps deposit have some of the highest Ni and Pd tenors at Voisey’s Bay, which are indicative of not only more primitive magmas but also higher R factors than the Ovoid or the Eastern Deeps. VTT and normal-textured troctolite of the Eastern Deeps that contain trace sulfide have 0.1–3?ppb Pt and 0.1–3?ppb Pd, whereas weakly to heavily mineralized variable troctolites in the same unit have one to two orders of magnitude higher abundances of Pt and Pd. Troctolites and olivine gabbros from other parts of the Voisey’s Bay Intrusion and other Nain Plutonic Suite Intrusions, including the Kiglapait, Newark Bay, Barth Island, Mushua, and Nain Bay South Intrusion, also have low platinum group element abundances. Although it is possible that this is a signature of a widespread sulfide saturation event that pre-dated ore formation at Voisey’s Bay, it is more likely that platinum group element (PGE) depletion is a product of the source melting process where low degrees of melting resulted in the retention of PGE in the mantle source. If so, this indicates that PGE depletion should be used with caution as an exploration tool in the Nain Plutonic Suite.