Attenuation tomography: An application to gas-hydrate and free-gas detection

We estimate the quality factor (Q) from seismic reflections by using a tomographic inversion algorithm based on the frequency‐shift method. The algorithm is verified with a synthetic case and is applied to offshore data, acquired at western Svalbard, to detect the presence of bottom‐simulating reflectors (BSR) and gas hydrates. An array of 20 ocean‐bottom seismographs has been used. The combined use of traveltime and attenuation tomography provides a 3D velocity–Q cube, which can be used to map the spatial distribution of the gas‐hydrate concentration and free‐gas saturation. In general, high P‐wave velocity and quality factor indicate the presence of solid hydrates and low P‐wave velocity and quality factor correspond to free‐gas bearing sediments. The Q‐values vary between 200 and 25, with higher values (150–200) above the BSR and lower values below the BSR (25–40). These results seem to confirm that hydrates cement the grains, and attenuation decreases with increasing hydrate concentration.     

Spatial association of mud volcano and sandstone intrusions,Boyadag anticline,western Turkmenistan

The mud volcano and sandstone intrusions complex occurring in the Boyadag anticline, western Turkmenistan, is the only well‐documented example of co‐existing, but not synchronous, mud volcanism and sand intrusion. Integrated field and laboratory evaluation investigates the spatial and genetic relations between the mud extrusion and the later sand intrusion. A sandstone dike and a pillar pierce mud volcano deposits on the crest of Boyadag anticline. Two more dikes occur near the escarpment caused by a crestal normal fault. The rising of mud and hydrocarbons from the Oligocene Maykop Fm. fed the mud volcano after the exposure of the Lower Pleistocene units at the core of the anticline. The main physical process that later led to sand fluidisation is identified as the progressive increase in pore fluid pressure, during a stage of reduced or null activity of the mud volcano, caused by the up‐dip migration of hydrocarbons from the deep basin into the Pliocene sandstone reservoir within the Boyadag anticline. The hydrocarbons generated in the source rock levels of the Maykop Fm., whereas the saline water involved in the sand fluidisation is identified as the connate water of the Pliocene Red Beds Fm. The pressure rise was responsible for the fracturing of the sealing units, already weakened by the crestal normal fault and the mud volcano feeding system. The sand intruded into sealing units and mud breccia deposits, also using the mud volcano conduit and the crestal normal fault as preferential pathways. During the present‐day background activity, the outcropping sandstone intrusions provide high permeability pathways for continuous fluid leakage, precluding the re‐establishment of high pressures in the reservoir.     

Seismic modelling study of a subglacial lake

We characterize the seismic response of Lake Vostok, an Antarctic subglacial lake located at nearly 4 km depth below the ice sheet. This study is relevant for the determination of the location and morphology of subglacial lakes. The characterization requires the design of a methodology based on rock physics and numerical modelling of wave propagation. The methodology involves rock-physics models of the shallow layer (firn), the ice sheet and the lake sediments, numerical simulation of synthetic seismograms, ray tracing, τ–p transforms, and AVA analysis, based on the theoretical reflection coefficients. The modelled reflection seismograms show a set of straight events (refractions through the firn and top-ice layer) and the two reflection events associated with the top and bottom of the lake. Theoretical AVA analysis of these reflections indicates that, at near offsets, the PP-wave anomaly is negative for the ice/water interface and constant for the water/sediment interface. This behaviour is shown by AVA analysis of the synthetic data set. This study shows that subglacial lakes can be identified by using seismic methods. Moreover, the methodology provides a tool for designing suitable seismic surveys.     

An Integrated Numerical Modelling–Discrete Fracture Network Approach Applied to the Characterisation of Rock Mass Strength of Naturally Fractured Pillars

Naturally fractured mine pillars provide an excellent example of the importance of accurately determining rock mass strength. Failure in slender pillars is predominantly controlled by naturally occurring discontinuities, their influence diminishing with increasing pillar width, with wider pillars failing through a combination of brittle and shearing processes. To accurately simulate this behaviour by numerical modelling, the current analysis incorporates a more realistic representation of the mechanical behaviour of discrete fracture systems. This involves realistic simulation and representation of fracture networks, either as individual entities or as a collective system of fracture sets, or a combination of both. By using an integrated finite element/discrete element–discrete fracture network approach it is possible to study the failure of rock masses in tension and compression, along both existing pre-existing fractures and through intact rock bridges, and incorporating complex kinematic mechanisms. The proposed modelling approach fully captures the anisotropic and inhomogeneous effects of natural jointing and is considered to be more realistic than methods relying solely on continuum or discontinuum representation. The paper concludes with a discussion on the development of synthetic rock mass properties, with the intention of providing a more robust link between rock mass strength and rock mass classification systems.     

A Bayesian hierarchical approach for spatial analysis of climate model bias in multi-model ensembles

Coupled atmosphere–ocean general circulation models are key tools to investigate climate dynamics and the climatic response to external forcings, to predict climate evolution and to generate future climate projections. Current general circulation models are, however, undisputedly affected by substantial systematic errors in their outputs compared to observations. The assessment of these so-called biases, both individually and collectively, is crucial for the models’ evaluation prior to their predictive use. We present a Bayesian hierarchical model for a unified assessment of spatially referenced climate model biases in a multi-model framework. A key feature of our approach is that the model quantifies an overall common bias that is obtained by synthesizing bias across the different climate models in the ensemble, further determining the contribution of each model to the overall bias. Moreover, we determine model-specific individual bias components by characterizing them as non-stationary spatial fields. The approach is illustrated based on the case of near-surface air temperature bias in the tropical Atlantic and bordering regions from a multi-model ensemble of historical simulations from the fifth phase of the Coupled Model Intercomparison Project. The results demonstrate the improved quantification of the bias and interpretative advantages allowed by the posterior distributions derived from the proposed Bayesian hierarchical framework, whose generality favors its broader application within climate model assessment.     

Analysis with C- and X-band satellite SAR data of the Portalet landslide area

This paper describes the use of the Stable Point Network technique, a Persistent Scatterer Interferometry SAR technique, for the analysis of the Portalet landslide area (Central Pyrenees, Spain). For this purpose, different SAR datasets acquired by ERS-1, ERS-2, ENVISAT and TerraSAR-X satellites have been analysed. The use of different SAR images acquired by satellite radar sensors operating at different microwave lengths has allowed for a comparative assessment and illustration of the advantages and disadvantages of these satellites for landslide detection and monitoring. In the introduction, differential interferometry and the study area are briefly described. Then the specifics of the SPN processing and the results of the different datasets are described and compared. In Analysis of the results: the Portalet landslide area, the Portalet landslide area is introduced and the radar displacement measurements are analysed with available geo-information data. Additionally, X-band measurements are compared with those gathered by a ground-based SAR for a previous project. Finally, the most relevant conclusions of this work are discussed.     

Melt inclusions in detrital spinel from the SE Alps (Italy–Slovenia): a new approach to provenance studies of sedimentary basins

Detrital spinel is a widespread heavy mineral in sandstones from the Maastrichtian–Middle Eocene sedimentary basins in the SE Alps. Chemistry of detrital spinels from the Claut/Clauzetto and Julian Basins (N Italy and NW Slovenia) is used to constrain petrological and geochemical affinities and tectonic provenance of the source rocks. In addition, we have analysed melt inclusion compositions in the detrital volcanic spinels to better constrain the nature of their parental magmas. This is the first study of melt inclusions in detrital spinels. Two principal compositional groups of detrital spinels are recognised based on their TiO₂ and Fe²⁺/Fe³⁺; one derived from peridotites, the other from basaltic volcanics. Peridotitic spinels are more abundant and have TiO₂ < 0.2 wt% and high Cr/Cr + Al (40–90), characteristic of suprasubduction zone harzburgites. Significant chemical variations among volcanic spinels (TiO₂ up to 3 wt%, Al₂O₃ 12–44 wt%) suggest multiple sources, with geochemically distinct characteristics, including MORB-type and backarc basin basalts, subduction-related magmas and tholeiites produced during early continental rifting. Compositions of homogenised melt inclusions in spinels with TiO₂ > 0.2 better distinguish the differences between the compositions of their host spinels and help to further clarify the geodynamic provenance of extrusive source rocks. Several compositional groups of melt inclusions have been recognised and represent diverse magmatism of marginal basins, including MORB- and subduction-related geochemical types, as well as magmas characteristic of early continental rifting. These results, combined with the data on regional ophiolitic complexes and tectonic reconstructions favour the Internal Dinarides of Yugoslavia as a possible source area for the SE Alps sediments. Received: 20 January 2000 / Accepted: 25 April 2000     

Imposex levels and concentrations of organotin compounds (TBT and its metabolites) in Nassarius nitidus from the Lagoon of Venice

Specimens of Nassarius nitidus were collected in seven stations of the Venice Lagoon to assess the levels of tributyltin (TBT) and its metabolites monobutyltin and dibutyltin in the tissues and monitor their effect on organisms, in particular the phenomenon of imposex (superimposition of male sexual characteristics on females). The following values of population indices were found: vas deferens sequence: 1.2+/-0.7-4.0+/-0.5; relative penis length: 6-47%. The least impacted station was situated in the northern part of the Lagoon, where females without imposex were found and Butyltin (BuTs) concentrations in the organisms (average sum of BuTs=43+/-14 ngSng(-1)w.) were significantly lower than in the other stations (range of average sum of BuTs: 101+/-22-217+/-27 ngSng(-1)d.w.). Population indices were found to be related to the TBT content in the tissues. In particular VDSI had a significant logarithmic correlation: r=0.95, n=8, p<0.05.     

Imposex levels and concentrations of organotin compounds (TBT and its metabolites) in Nassarius nitidus from the Lagoon of Venice

Specimens of Nassarius nitidus were collected in seven stations of the Venice Lagoon to assess the levels of tributyltin (TBT) and its metabolites monobutyltin and dibutyltin in the tissues and monitor their effect on organisms, in particular the phenomenon of imposex (superimposition of male sexual characteristics on females). The following values of population indices were found: vas deferens sequence: 1.2 ± 0.7–4.0 ± 0.5; relative penis length: 6–47%. The least impacted station was situated in the northern part of the Lagoon, where females without imposex were found and Butyltin (BuTs) concentrations in the organisms (average sum of BuTs = 43 ± 14 ng Sn g⁻¹ w.) were significantly lower than in the other stations (range of average sum of BuTs: 101 ± 22–217 ± 27 ng Sn g⁻¹ d.w.). Population indices were found to be related to the TBT content in the tissues. In particular VDSI had a significant logarithmic correlation: r = 0.95, n = 8, p < 0.05.