A Case Study on the Effects of Heterogeneous Soil Moisture on Mesoscale Boundary-Layer Structure in the Southern Great Plains, U.S.A. Part II: Mesoscale Modelling

The importance of soil moisture inputs and improved model physics in the prediction of the daytime boundary-layer structure during the Southern Great Plains Hydrology Experiment 1997 (SGP97) is investigated using the non-hydrostatic fifth-generation Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR) Mesoscale Model MM5. This is Part II of a two-part study examining the relationship of surface heterogeneity to observed boundary-layer structure. Part I focuses on observations and utilizes a simple model while Part II uses observations and MM5 modelling. Soil moisture inputs tested include a lookup table based on soil type and season, output from an offline land-surface model (LSM) forced by atmospheric observations, and high-resolution ( 800 m) airborne microwave remotely sensed data. Model physics improvements are investigated by comparing an LSM directly coupled with the MM5 to a simpler force-restore method at the surface. The scale of land surface heterogeneities is compared to the scale of their effects on boundary-layer structure.The use of more detailed soil moisture fields allowed the MM5 to better represent the large-scale (hundreds of km) and small-scale (tens of km) horizontal gradients in surface-layer weather and, to a lesser degree, the atmospheric boundary-layer (ABL) height, which was evaluated against observations measured by differential absorption lidar (DIAL). The benefits of coupling an LSM to the MM5 were not readily evident in this summertime case, with the model having particular difficulty simulating the timing of maximum surface fluxes while underestimating the depth of the mixed layer.     

Marymia: an Archean, amphibolite facies-hosted, orogenic lode-gold deposit overprinted by Palaeoproterozoic orogenesis and base metal mineralisation, Western Australia

The Marymia gold deposit, comprising two orebodies, Keillor 1 and Keillor 2, is at the northern end of the Plutonic Well greenstone belt in the Marymia Inlier, in the southern Capricorn Orogen, just north of the Yilgarn craton. The Marymia Inlier is a discrete fault-bounded Archean gneiss-granitoid-greenstone domain surrounded by sedimentary basins that were formed and variably metamorphosed and deformed during several Palaeoproterozoic orogenic cycles. The greenstone sequence at Marymia is stratigraphically and geochemically similar to greenstone sequences in the Yilgarn craton, but was subjected to further deformation and metamorphism in the Palaeoproterozoic. Late Archean deformation (D1-D2) was ductile to brittle-ductile in style, whereas Palaeoproterozoic deformation was predominantly brittle. Equilibrium mineral assemblages indicate that peak amphibolite-facies metamorphism (540-575 °C, <3 kb) was overprinted by greenschist-facies metamorphism (300-360 °C). Petrographic textures indicate that prograde metamorphism was coeval with D1-D2, with peak metamorphism early to syn D2. Gold mineralisation at Marymia is hosted in metamorphosed tholeiitic basalts and banded iron formation. On a gross scale, the distribution of gold is controlled by D2 folds and shear zones. Lithological contacts with strong rheological or chemical contrasts provide local controls. Gold-related alteration comprises subtle millimetre- to centimetre-wide zones of silicification with variable amounts of quartz, hornblende, biotite, K-feldspar, plagioclase, calcite/siderite, scheelite, titanite, epidote, sulfide and telluride minerals. Quartz veins are generally narrow and discontinuous with low total volume of quartz. Gold is sited in the wall rock, at vein salvedges or within stringers of wall rock within veins. There are two distinct opaque-mineral assemblages: pyrite-pyrrhotite-chalcopyrite-galena and hessite-petzite-altaite-Bi-telluride-galena. Ore samples are variably enriched in Ag, Te, Pb, W, Cu, S and Fe reflecting heterogeneity of the ore mineralogy. Structural timing and temperature of formation of alteration and ore minerals support deposition of gold during late peak amphibolite-facies metamorphism from neutral to alkaline (pH=5-6), moderately oxidising (log P_O2,-21-22) and CO₂-bearing (X_CO2 Ƹ.2) fluids. The total sulfur content of the fluid is estimated at 1mDS. Lead isotope compositions support derivation of lead from within the local greenstone sequence. Gold lodes were deformed by faults and shear zones in the Palaeoproterozoic, with only limited remobilisation. Subeconomic, carbonate vein- and breccia-hosted base metal mineralisation is locally hosted within Palaeoproterozoic fault zones, which clearly cut gold lodes. Base-metal-related alteration is characterised by intense carbonatisation, chloritisation, and albitisation of the mafic host rocks. Mineral assemblages are consistent with formation at greenschist facies conditions. Lead isotope compositions support crystallisation at ca. 1.7 Ga from lead that is similar in composition to earlier gold-related galena.     

Stellar polarization and the structure of the magnetic field of our galaxy

The stellar polarization data have been examined using a new catalogue containing accurate stellar distances. On the assumption of a magnetic alignment hypothesis, correlations on the larger distance scale indicate the existence of a dominant regular magnetic field, although its characteristics are difficult to determine. Within 500 pc its direction is towardsl45° and beyond this towardsl60°, though it is clear that such a longitudinal model is too simple. There is also some evidence for an inclination of this field to the galactic plane. The distribution of the polarization vectors away from the galactic plane has been examined and it is proposed that the two largest loop structures, previously identified as Supernova remnants, are linked by the regular field. Incremental polarization maps have been produced but they show little correlation with the spiral structure. The polarization appears to be saturated at about 1 kpc from the Sun, which is explained as the result of an observational selection effect. On the smaller distance scales an autocorrelation analysis in different directions has revealed no obvious coherence in the irregular component on scales greater than 50 pc.     

Evolution of basin architecture in an incipient continental rift: the Cenozoic Most Basin, Eger Graben (Central Europe)

The Oligo-Miocene Most Basin is the largest preserved sedimentary basin within the Eger Graben, the easternmost part of the European Cenozoic Rift System (ECRIS). The basin is interpreted as a part of an incipient rift system that underwent two distinct phases of extension. The first phase, characterised by NNE–SSW- to N–S-oriented horizontal extension between the end of Eocene and early Miocene, was oblique to the rift axis and caused evolution of a fault system characterised by en-échelon-arranged E–W (ENE–WSW) faults. These faults defined a number of small, shallow initial depocentres of very small subsidence rates that gradually merged during the growth and linkage of the normal fault segments. The youngest part of the basin fill indicates accelerated subsidence caused probably by the concentration of displacement at several major bounding faults. Major post-depositional faulting and forced folding were related to a change in the extension vector to an orthogonal position with respect to the rift axis and overprinting of the E–W faults by an NE–SW normal fault system. The origin of the palaeostress field of the earlier, oblique, extensional phase remains controversial and can be attributed either to the effects of the Alpine lithospheric root or (perhaps more likely because of the dominant volcanism at the onset of Eger Graben formation) to doming due to thermal perturbation of the lithosphere. The later, orthogonal, extensional phase is explained by stretching along the crest of a growing regional-scale anticlinal feature, which supports the recent hypothesis of lithospheric folding in the Alpine–Carpathian foreland.     

Stable carbon isotope variations in northwest Europe during the last glacial–interglacial transition

Stable carbon isotope data that span part of the last glacial–interglacial transition (ca. 14-9 ka ¹⁴C BP; ca. 15–11 ka cal. BP), and which derive from organ-specific plant macrofossils recovered from two lake sediment profiles in the UK and one in Norway, are compared. The recorded temporal variations show similar trends, which, over a millennial time-scale appear to parallel the main drift in δ¹⁸O as determined for the GRIP ice-core. It is postulated that some smaller scale variations in the δ¹³C profiles may reflect the shorter term oscillations in δ¹⁸O values evident in the GRIP record, although this is less certain. Overall, however, the results suggest that stable carbon isotope measurements based on organ-specific terrestrial plant macrofossils may provide (i) a means for establishing correlations between terrestrial successions and (ii) additional paleoenvironmental information, as the apparent ‘shadowing’ of the GRIP record indicates a common forcing mechanism for both Greenland δ¹⁸O and northwest European δ¹³C variations. From the evidence available we suggest that the recorded δ¹³C variations reflect fluctuations in air temperature and/or changes in water vapour pressure in the atmosphere. © 1997 John Wiley & Sons, Ltd.     

Observing total solar eclipses from near the edge of the predicted path

Suitable observations from various locations in the predicted path of a total solar eclipse can provide information about the relative positions and shapes of the Sun and Moon to about ±0.02. The total solar eclipse of 1972, July 10 was observed from locations near the edges of its predicted path. The durations of the limb phenomena were greatly enhanced. Preliminary analysis of the observations shows that the eclipse shadow passed 3 km northeast of its predicted path.Communication presented at the conference on Lunar Dynamics and Observational Coordinate Systems held January 15–17, 1973 at the Lunar Science Institute, Houston, Tex., U.S.A.     

Strong, Variable Circular Polarization in PKS 1519–273

It is found that velocity shear enables the extraction of kinetic energy from the background flow by Dust-Acoustic waves. It is also shown that the velocity shear leads to the appearance of a new mode of the dust particles collective behaviour, called shear dust vortices. This revised version was published online in July 2006 with corrections to the Cover Date.