Past and future sea-level rise along the coast of North Carolina,USA

We evaluate relative sea level (RSL) trajectories for North Carolina, USA, in the context of tide-gauge measurements and geological sea-level reconstructions spanning the last ~11,000 years. RSL rise was fastest (~7 mm/yr) during the early Holocene and slowed over time with the end of the deglaciation. During the pre-Industrial Common Era (i.e., 0–1800 CE), RSL rise (~0.7 to 1.1 mm/yr) was driven primarily by glacio-isostatic adjustment, though dampened by tectonic uplift along the Cape Fear Arch. Ocean/atmosphere dynamics caused centennial variability of up to ~0.6 mm/yr around the long-term rate. It is extremely likely (probability P=0.95) that 20th century RSL rise at Sand Point, NC, (2.8 ± 0.5 mm/yr) was faster than during any other century in at least 2,900 years. Projections based on a fusion of process models, statistical models, expert elicitation, and expert assessment indicate that RSL at Wilmington, NC, is very likely (P=0.90) to rise by 42–132 cm between 2000 and 2100 under the high-emissions RCP 8.5 pathway. Under all emission pathways, 21st century RSL rise is very likely (P>0.90) to be faster than during the 20th century. Due to RSL rise, under RCP 8.5, the current ‘1-in-100 year’ flood is expected at Wilmington in ~30 of the 50 years between 2050-2100.     

Some properties of flows in unsaturated soils with an exponential dependence of the hydraulic conductivity upon the pressure head

A systematic development of the consequences of an exponential dependence of the hydraulic conductivity upon the pressure head is presented. Alternative expressions for the flux are discussed in detail. For steady flows, partial differential equations in terms of the matric flux potential, the pressure head, and the total head are derived. For steady, plane and axially symmetric flows, partial differential equations for the stream function are given. A theoretical basis for the construction of viscous flow analogs for steady, plane and axially symmetric flows is also presented.     

A comparative mineralogical study of gas-related sediments of the Gulf of Cádiz

The Gulf of Cádiz area has been extensively surveyed in recent years and several gas-related fluid escape seafloor structures have been identified. In this study, gravity cores, collected during the ANASTASYA/00 and ANASTASYA/01 cruises, on mud volcanoes, hemipelagic sediments and dredged material from diapiric structures, have been studied. A comparative mineralogical analysis by XRD and SEM of samples from different areas has been performed in order to determine whether there is a characteristic mineralogy related to these fluid escape structures, and also to determine the origin of the mud matrix and constrain the depth of the parent units. The mineralogical analysis reflects the different origins of the different units described in the cores: hemipelagic material of the slope, clays that underlie the mud volcanoes and are discharged at the sea bottom surface, and authigenic and diagenetic minerals possibly involved in the anaerobic oxidation of methane in the mud volcano sediments.     

Surflan and oryzalin impair reproduction in the teleost medaka (Oryzias latipes)

We conducted studies to determine if the xenoestrogens Surflan and its active ingredient oryzalin, affect indices of reproductive fitness in medaka (Oryzias latipes). Oryzalin (0.5, 0.25mg/l) or Surflan (2.0 microl/l) and oryzalin (0.5mg/l) significantly increased the mean number of non-fertilized eggs produced by treated females paired with untreated males, or by untreated females paired with treated males. Oryzalin (1.0, 0.5, 0.25mg/l) and Surflan (3.8, 2.0, 1.0 microl/l) significantly affected the time to hatch of eggs from treated females paired with untreated males, and from untreated females paired with treated males. Surflan (3.8, 2.0, 1.0 microl/l) induced intersex lesions in 80-100% of males. Oryzalin-exposed males exhibited a significant increase in the incidence of necrotic spermatids and necrotic spermatogonia, while oryzalin-exposed females had significantly fewer immature oocytes and an increase in the occurrence of hyperplastic ovaries. Our results indicate that Surflan and oryzalin affect both reproduction and gonadal histology in male and female medaka.     

Response of juvenile lemon sharks, Negaprion brevirostris, to a magnetic barrier simulating a beach net

Beach nets are preventative devices used to minimize interactions between potentially harmful sharks and unsuspecting swimmers. Quantitative studies demonstrated that beach nets drastically reduced local elasmobranch populations, as well as caused considerable bycatch mortality. For this experiment, a beach net-like device was constructed and the behaviors of six juvenile lemon sharks (Negaprion brevirostris) were analyzed. Induced by olfactory and gustatory cues, sharks were given the choice to swim through a magnetic or control opening in the net. In the first trial, all six sharks avoided the magnetic region and significantly preferred to swim through the control region of the fence. The magnetic stimulus no longer affected the swimming behavior of three sharks retested after resting 24 h. Results from the retested sharks were correlated with those from repeated tonic immobility trials, which demonstrated a linear decrease in sensitivity to repeated magnetic stimulation. This study serves as a baseline experiment demonstrating that permanent magnets may substantially decrease elasmobranch mortality within beach nets.     

Inter-basin movements of Mediterranean sperm whales provide insight into their population structure and conservation

The sperm whale is one of the very few deep diving mammal species in the Mediterranean Sea. Following a rare mass stranding of male sperm whales in the Adriatic Sea in December 2009, photo-identification methods were used in order to investigate previous sightings of the stranded whales in the region. Fluke photos of the stranded whales were compared with those of 153 and 128 free-ranging individuals photographed in the western and eastern Mediterranean basins, respectively. Three out of the seven stranded whales had been previously photo-identified and some of them more than once. To reach the stranding place, two of these re-identified whales performed long-range inter-basin movements of about 1600-2100 km (in a straight line) either through the Strait of Sicily or the Strait of Messina. In addition, comparisons among all whales photographed in the two Mediterranean basins revealed that one more individual first photographed in the western basin (1991) was re-identified 13 years later in the eastern basin (2004). These three cases provide the first conclusive evidence of inter-basin movement of sperm whales in the Mediterranean Sea. Inter-basin gene flow is important for the survival of the small and endangered Mediterranean sperm whale population. Mitigating the disturbance created by human activities in the straits area is crucial for its conservation.     

Overlapping distributions of cryptic Scoloplos cf. armiger species in the western Wadden Sea

Unknowingly lumping cryptic species in biological monitoring studies hinders progress in understanding their functioning in a wide range of research fields including population dynamics, ecophysiology and community ecology. The common polychaete worm Scoloplos cf. armiger is a cryptic species complex comprising entirely different developmental modes: holobenthic and pelago-benthic development. In the northeast Atlantic, three putative species have been described on the basis of molecular data and a breeding study. We report on the development of a fast genotyping assay and on the occurrence and distribution of different molecular types in the western Wadden Sea. The genotyping assay consists of PCR-RFLP analysis by two enzymes of a mitochondrial (cox3-trnQ-nad6) DNA segment. A new, fourth type was observed and this was the only type whose geographical distribution was not uniform but instead skewed toward the eastern part of the study area. All three hitherto known types were also observed and these three displayed a significant difference in depth distribution within the study area. This is the first ecological difference reported for the ‘Subtidal Clade’ (SC) versus the ‘Type Locality Clade’ (TLC). The new type (‘Intertidal Clade 2’) had a similar distribution to what is known as the Intertidal Clade (IC). However, the most striking observation is the large degree of overlap between the depth distributions in the western Wadden Sea, where the clade names ‘Intertidal’ and ‘Subtidal’ do not necessarily reflect local species composition. The necessity to genotype Scoloplos cf. armiger in monitoring programs is emphasized.     

A review of the equations used to predict the velocity distribution within a ship’s propeller jet

Predicting the velocity within the ship’s propeller jet is the initial step to investigate the scouring made by the propeller jet. Albertson et al. (1950) suggested the investigation of a submerged jet can be undertaken through observation of the plain water jet from an orifice. The plain water jet investigation of Albertson et al. (1950) was based on the axial momentum theory. This has been the basis of all subsequent work with propeller jets. In reality, the velocity characteristic of a ship’s propeller jet is more complicated than a plain water jet. Fuehrer and Römisch (1977), Blaauw and van de Kaa (1978), Berger et al. (1981), Verhey (1983) and Hamill (1987) have carried out investigations using physical model. Current paper reviews the state-of-art of the equations used to predict the time-averaged axial, tangential and radial components of velocity within the zone of flow establishment and the zone of established flow of a ship’s propeller jet.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.