Error characteristics of high resolution regional climate models over the Alpine area

This study describes typical error ranges of high resolution regional climate models operated over complex orography and investigates the scale-dependence of these error ranges. The results are valid primarily for the European Alpine region, but to some extent they can also be transferred to other orographically complex regions of the world. We investigate the model errors by evaluating a set of 62 one-year hindcast experiments for the year 1999 with four different regional climate models. The analysis is conducted for the parameters mean sea level pressure, air temperature (mean, minimum and maximum) and precipitation (mean, frequency and intensity), both as an area average over the whole modeled domain (the “Greater Alpine Region”, GAR) and in six subregions. The subregional seasonal error ranges, defined as the interval between the 2.5th percentile and the 97.5th percentile, lie between ?3.2 and +2.0 K for temperature and between ?2.0 and +3.1 mm/day (?45.7 and +94.7%) for precipitation, respectively. While the temperature error ranges are hardly broadened at smaller scales, the precipitation error ranges increase by 28%. These results demonstrate that high resolution RCMs are applicable in relatively small scale climate impact studies with a comparable quality as on well investigated larger scales as far as temperature is concerned. For precipitation, which is a much more demanding parameter, the quality is moderately degraded on smaller scales.     

Deglaciation of the western margin of the Barents Sea Ice Sheet — A swath bathymetric and sub-bottom seismic study from the Kveithola Trough

Kveithola Trough, an E–W trending glacial trough in the NW Barents Sea, was surveyed for the first time during the EGLACOM cruise of R/V OGS-Explora in summer 2008. Swath bathymetry shows that the seafloor is characterized by E–W trending mega-scale glacial lineations (MSGL) that record a fast flowing ice stream draining the Svalbard/Barents Sea Ice Sheet (SBIS) during the Last Glacial Maximum (LGM). MSGL are overprinted by transverse sediment ridges about 15 km apart which give rise to a staircase axial profile of the trough. Such transverse ridges are interpreted to be grounding-zone wedges (GZWs) formed by deposition of subglacial till during episodic ice stream retreat. Sub-bottom (CHIRP) and multi-channel reflection seismic data show that the present-day morphology is largely inherited from the palaeo-seafloor topography at the time of deposition of the transverse ridges, overlain by a draping glaciomarine unit which in places is over 15 m thick. Our data allow the reconstruction of depositional processes which accompanied deglaciation of the Spitsbergen Bank area. The sedimentary drape deposited on top of the GZWs is suggested to have accumulated at a very high rate, (on average in the order of 1–1.5 m ka^?1) and therefore may potentially preserve a high-resolution palaeoclimatic record of deglaciation and post-glacial conditions in this sector of the Barents Sea.     

Simultaneous simulation of the three components of seismic accelerograms at locations around seismological stations

Journal of Seismology - This paper proposes a new numerical procedure, based on an evolutionary optimization algorithm, for the simultaneous generation of the three components of the seismic ground...     

The robustness of the Zr-in-rutile and Ti-in-zircon thermometers during high-temperature metamorphism (Ivrea-Verbano Zone, northern Italy)

This study investigates the behaviour of the Zr-in-rutile and Ti-in-zircon thermometers in granulite facies metapelites from the Ivrea-Verbano Zone lower crustal section. U–Pb ages of zircon constrain the timing of regional amphibolite–granulite facies metamorphism to 316 ± 3 Ma and record zircon recrystallisation and resetting of U–Pb ages at 276 ± 4 Ma and 258 ± 3 Ma. Zr-in-rutile thermometry records peak contact metamorphic temperatures related to intrusion of mafic magmatic rocks and gives peak temperatures between 900–930 °C and 1,000–1,020 °C that are consistent with the geological settings of the samples. Ti-in-zircon temperatures of 700–800 °C and 810–870 °C record growth or re-equilibration of zircon after cooling from peak temperatures. Ti-in-quartz thermometry for one sample records both peak and retrograde temperatures. Some rutiles in all samples record resetting of Zr-in-rutile temperatures at ~750–800 °C. Electron microprobe profiles across individual rutiles demonstrate that Zr expulsion occurred by recrystallisation rather than by diffusive exchange. Exsolution of small needles of baddelyite or zircon from rutile is an important method of Zr redistribution, but results in no net Zr loss from the grain. The demonstration that Zr-in-rutile thermometry can robustly record peak temperatures that are not recorded by any other thermometer emphasises the relevance of this technique to investigating the evolution of high-grade metamorphic terranes, such as those that characterise the lower crust.     

Timescales of crustal melting in the Higher Himalayan Crystallines (Sikkim, Eastern Himalaya) inferred from trace element-constrained monazite and zircon chronology

The petrology and timing of crustal melting has been investigated in the migmatites of the Higher Himalayan Crystalline (HHC) exposed in Sikkim, India. The metapelites underwent pervasive partial melting through hydrous as well as dehydration melting reactions involving muscovite and biotite to produce a main assemblage of quartz, K-feldspar, plagioclase, biotite, garnet ± sillimanite. Peak metamorphic conditions were 8–9 kbar and ~800 °C. Monazite and zircon crystals in several migmatites collected along a N–S transect show multiple growth domains. The domains were analyzed by microbeam techniques for age (SHRIMP) and trace element composition (LA-ICP-MS) to relate ages to conditions of formation. Monazite preserves the best record of metamorphism with domains that have different zoning pattern, composition and age. Zircon was generally less reactive than monazite, with metamorphic growth zones preserved in only a few samples. The growth of accessory minerals in the presence of melt was episodic in the interval between 31 and 17 Ma, but widespread and diachronous across samples. Systematic variations in the chemical composition of the dated mineral zones (HREE content and negative Eu anomaly) are related to the variation in garnet and K-feldspar abundances, respectively, and thus to metamorphic reactions and P–T stages. In turn, this allows prograde versus decompressional and retrograde melt production to be timed. A hierarchy of timescales characterizes melting which occurred over a period of ~15 Ma (31–17 Ma): a given block within this region traversed the field of melting in 5–7 Ma, whereas individual melting reactions lasted for time durations below, or approaching, the resolution of microbeam dating techniques (~0.6 Ma). An older ~36 Ma high-grade event is recorded in an allocthonous relict related to mafic lenses. We identify two sections of the HHC in Sikkim that traversed similar P–T conditions at different times, separated by a tectonic discontinuity. The higher structural levels reached melting and peak conditions later (~26–23 Ma) than the lower structural levels (~31–27 Ma). Diachronicity across the HHC cannot be reconciled with channel flow models in their simplest form, as it requires two similar high-grade sections to move independently during collision.     

A multidisciplinary approach for rock spreading and block sliding investigation in the north-western coast of Malta

Landslides are widespread along the north-western coast of the Island of Malta and are strictly linked to the structural setting. Exemplary cases of rock spreading and block sliding phenomena characterise this stretch of coast. They are favoured by the overposition of two different geological units widely outcropping there, the Blue Clay Formation and the Upper Coralline Limestone Formation. The latter forms a wide plateau, bordered by vertical cliffs. At the foot of the cliffs, clayey terrains crop out and develop gentle slopes covered by large blocks detached and moved by rock spreading and block sliding phenomena. These mass movements are favoured by the fragile behaviour of limestones, which cap clays, otherwise characterised by visco-plastic properties. In order to investigate the kinematics and the evolution of these types of coastal landslides, a multidisciplinary and multitechnical approach was applied on a study site, named Il-Prajjet, which provides a spectacular case of rock spreading evolving into block sliding. This paper illustrates the results achieved by means of different engineering geological and geophysical techniques allied with traditional detailed geomorphological survey and mapping. In particular, the surface displacements of the landslides were determined using long-term GPS observations, acquired approximately every 6 months, over a 4.5-year period. A network of GPS benchmarks were distributed on the edge of a limestone plateau affected by rock spreading and on a series of displaced blocks making up a large block slide, finally enabling the definition of the state of activity and the rates of movement to be performed. In addition, the results deriving from two continuous fissurimeters more recently installed at the edge of two persistent joints over the block sliding area are outlined, with reference to the correlation between variations of crack apertures and precipitation input. In order to identify main structural discontinuities and to reconstruct variability of underground surface contact between clays and overlying limestones, Resistivity Tomography profiles and GPR investigations were carried out. Finally, the results obtained by combining the outputs of geophysical surveys and different field monitoring activities can be considered a first step on which numerical models can be developed and validated, in order to assess landslide hazard and risk of this stretch of Maltese coastline.     

An integrated approach to environmental quality assessment in a coastal setting in Campania (Southern Italy)

The coastal region of Southern Italy’s Caserta province, known as the Litorale Domitio (Domitia coast) has been subjected to increasing pressure from unsustainably fast economic and urban growth in the last century, that resulted in a induced serious land degradation. To obtain a comprehensive picture of the ecological status of the Domitia coastal zone (Campania, Southern Italy), a holistic methodology has been applied. Sedimentological, geochemical, and biological analyses of the surface sediments and water samples were performed along the submerged beach. The data were integrated using a geographical information system, together with information on past and present land use and human activities along the coast and in inland regions. Heavy metal concentrations in sediments plus As and Se (Cd, Co, Cr, Cu, Hg, Ni, Pb, V, Zn) and their enrichment factors, which are important for identifying polluted areas in countries like Italy (where environmental legislation has not yet established intervention limits), indicate excesses Cd, Cr, Pb, and V of probable anthropogenic origin. A microbiological contamination of marine waters has been detected by the Regional Environmental Protection Agency of Campania. The Bacteriological Quality Index map shows that bathing areas must be classified as “contaminated” and “highly contaminated”. High levels of chemical and biological contamination are particularly common in both bathing seawater and sediments along the coastal zone south of the Volturno River, where the existing wastewater treatment plant is not properly working, to date. Factory farming, which is widespread in the area, is likely to be an additional important source of contamination. In accordance with these conclusions, analyses of the benthic diatom community revealed dominance of eutrophic species.     

Experiments and Numerical Simulations on the Mid-Term Evolution of Hypersonic Jets

The experiment described here is focussed to the observation of underexpanded, hypersonic turbulent jets. The experiment is relevant to a few aspects concerning the dynamics of astrophysical phenomena such as the Herbig-Haro jets and to the interaction between the large-scale vortices and the system of shocks that determine the spreading and entrainment properties of highly compressible free-flows. A number of orifice jets with a ratio between the stagnation pressure and the ambient pressure of the order 10³-10⁴ have been studied by changing the stagnation/ambient density ratio. This has been realized using dissimilar gases in the jet and in the ambient medium: by using He, Ar and air the stagnation/ambient density ratio can be changed by one order of magnitude while keeping fixed the pressure ratio. It has been possible to visualize the near and mid-term evolution of the jets and measure the axial and transversal density distributions. A comparison relevant to the shock waves configuration in between the nozzle exit and the first Mach's disk is shown for an air in air laboratory jet and its numerical simulation.     

Impurities and heterogeneity in pyrite: Influences on electrical properties and oxidation products

Macroscopic pyrite crystals originating from a variety of geologic settings were made into thick sections. Electrical properties were measured with a Hall system, and minor element composition was analyzed with laser ablation inductively coupled plasma mass spectroscopy (LA-ICPMS). Selected thick sections were oxidized in a moist air environment inside a glove chamber. The relative metal content of surface products formed during oxidation was analyzed by LA-ICP-MS. Natural pyrite exhibits a range of electrical properties corresponding to the content of the common minor elements Co, As and Ni. These properties are similar to those of synthetic pyrite doped with single elements. Pyrite enriched in Co is an n-type semiconductor with low resistivity and high carrier mobility, while arsenian pyrite tends to be p-type and have higher resistivity. The effect of Ni is weaker and tends to be obscured by Co and As in samples of mixed composition. Cobalt demonstrates the strongest effect on electrical properties. Enrichment of Co at oxidized pyrite surfaces is inversely correlated with its concentration in the underlying pyrite. Cobalt enrichment in oxidation products is also more pronounced along crystal defects such as fractures, and in crystals with heterogeneous distribution of trace elements. These observations might be explained by differences in the electronic structure of pyrite arising from the presence of impurities, and by the distribution of domains with different impurity compositions, facilitating electron transfer.