VO_IMPAT:中国虚拟天文台图像处理分析工具

中国虚拟天文台图像处理分析工具（VO_IMPAT），是由国家天文台虚拟天文台项目组开发的一项服务，它提供了对数字巡天图像数据（Digital Sky Survey，DSS）、天文星表以及其他数据库的交互访问。VO_IMPAT的设计目的是实现多波段天文数据的融合。可以将不同波段的星表叠加到DSS底图上，如光学波段的USNO星表、近红外波段的2MASS星表、射电波段的NVSS星表和X射线波段的RASS星表。同时VO_IMPAT还可以对图像进行放大、缩小、伪彩色、等高线、直方图、尖锐化、平滑化、旋转等处理，不同的星表数据可以采用不同的颜色和图标显示。     

Discrimination of sedimentary facies by association analysis

The ability of association analysis to discriminate sedimentary facies was tested on Purdy's modal analyses of modern sediments of the Great Bahama Bank. Purdy's data set has served in the past as a standard reference for evaluating various multivariate classification algorithms. In order to adapt Purdy's data to association analysis, the percent abundance of the 12 constituents was converted to binary form by dichotomizing each variable on its mean value. The results obtained by association analysis are virtually identical to those obtained by Purdy and other authors. The same four main sedimentary facies were discriminated; 86% of the samples were identically classified (97% when misclassified borderline cases are counted as matches); the total partition variance of the classification is only negligibly greater (4%); and the grouping of the variables yielded the same four groups. The rank order of the three division-attributes responsible for the sample classification is fines, oolites, and corals. Association analysis has been employed by other authors to differentiate meaningful facies groups in studies of ancient reef carbonates, modern reef sediments, and heavy minerals in stream sediments. In all these studies, the results were found to be compatible with those obtained by using the continuous quantitative measurements, indicating that qualitative binary data may often be sufficient for the purpose of facies discrimination in many branches of geology and that association analysis is an effective method for this purpose.     

Observations with the Visual and Infrared Mapping Spectrometer (VIMS) during Cassini's flyby of Jupiter

The Cassini Visual and Infrared Mapping Spectrometer (VIMS) is an imaging spectrometer covering the wavelength range 0.3-5.2 μm in 352 spectral channels, with a nominal instantaneous field of view of 0.5 mrad. The Cassini flyby of Jupiter represented a unique opportunity to accomplish two important goals: scientific observations of the jovian system and functional tests of the VIMS instrument under conditions similar to those expected to obtain during Cassini's 4-year tour of the saturnian system. Results acquired over a complete range of visual to near-infrared wavelengths from 0.3 to 5.2 μm are presented. First detections include methane fluorescence on Jupiter, a surprisingly high opposition surge on Europa, the first visual-near-IR spectra of Himalia and Jupiter's optically-thin ring system, and the first near-infrared observations of the rings over an extensive range of phase angles (0-120°). Similarities in the center-to-limb profiles of H⁺₃ and CH₄ emissions indicate that the H⁺₃ ionospheric density is solar-controlled outside of the auroral regions. The existence of jovian NH₃ absorption at 0.93 μm is confirmed. Himalia has a slightly reddish spectrum, an apparent absorption near 3 μm, and a geometric albedo of 0.06±0.01 at 2.2 μm (assuming an 85-km radius). If the 3-μm feature in Himalia's spectrum is eventually confirmed, it would be suggestive of the presence of water in some form, either free, bound, or incorporated in layer-lattice silicates. Finally, a mean ring-particle radius of 10 μm is found to be consistent with Mie-scattering models fit to VIMS near-infrared observations acquired over 0-120° phase angle.     

智能照明系统在现代建筑照明中的应用研究

在对传统照明系统和智能照明系统进行对比分析的基础上,剖析了智能照明系统的控制策略,并结合实际的工程应用,着重讨论了基于ABB I-Bus产品的智能照明控制系统的实现,结果表明该系统具有高效、便捷、节约能源等优点.同时,还对系统与建筑物楼宇自控系统问的系统集成方式进行了研究.     

A versatile ground data display system for spacelab experiments

We describe a microprocessor-based data capture and display system suited to the needs of many Spacelab experimenters. Although developed specifically for the needs of the FAUST ultraviolet astronomy telescope, several features of the system may make it attractive to other groups who need to interact with their Spacelab data in real or near-real time. The display system captures data from the serial data stream originating in the Spacelab experiment computer input/output (ECIO) data channel, and can reformat and display several hundred variables per second in real time. The system offers a combination of Cathode Ray Tube (CRT) display and analog paper strip-chart output. A facility is also provided for simultaneously creating floppy-disk records of short segments of data according to prearranged criteria, to allow detailed examination of critical events in the operation of the experiment. The simplicity, economy, reliability, and flexibility of the display system suggest its use for monitoring a variety of low- and medium-data-rate Spacelab experiments.     

The effects of metamorphism on O and Fe isotope compositions in the Biwabik Iron Formation, northern Minnesota

The Biwabik Iron Formation of Minnesota (1.9 Ga) underwent contact metamorphism by intrusion of the Duluth Complex (1.1 Ga). Apparent quartz–magnetite oxygen isotope temperatures decrease from ∼700°C at the contact to ∼375°C at 2.6 km distance (normal to the contact in 3D). Metamorphic pigeonite at the contact, however, indicates that peak temperatures were greater than 825°C. The apparent O isotope temperatures, therefore, reflect cooling, and not peak metamorphic conditions. Magnetite was reset in δ¹⁸O as a function of grain size, indicating that isotopic exchange was controlled by diffusion of oxygen in magnetite for samples from above the grunerite isograd. Apparent quartz–magnetite O isotope temperatures are similar to calculated closure temperatures for oxygen diffusion in magnetite at a cooling rate of ∼5.6°C/kyr, which suggests that the Biwabik Iron Formation cooled from ∼825 to 400°C in ∼75 kyr at the contact with the Duluth Complex. Isotopic exchange during metamorphism also occurred for Fe, where magnetite–Fe silicate fractionations decrease with increasing metamorphic grade. Correlations between quartz–magnetite O isotope fractionations and magnetite–iron silicate Fe isotope fractionations suggest that both reflect cooling, where the closure temperature for Fe was higher than for O. The net effect of metamorphism on δ¹⁸O–δ⁵⁶Fe variations in magnetite is a strong increase in δ¹⁸O_Mt and a mild decrease in δ⁵⁶Fe with increasing metamorphic grade, relative to the isotopic compositions that are expected at the low temperatures of initial magnetite formation. If metamorphism of Iron Formations occurs in a closed system, bulk O and Fe isotope compositions may be preserved, although re-equilibration among the minerals may occur for both O and Fe isotopes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Enhancing understanding of breakdown and collapse in the Yorkshire Dales using ground penetrating radar on cave sediments

Historical evidence shows block breakdown and collapse are actively occurring in large fault aligned caverns in the Yorkshire Dales karst. Deployment of ground penetrating radar at two such sites has provided detailed images of the sedimentary sequences below the present day cavern floor but no large blocks are imaged within the sediments. Solutional processes must be removing limestone from the sediment to allow continued cavern growth. Possible mechanisms to account for the lack of large blocks within the sediment fill are discussed.     

Iron isotopes constrain biologic and abiologic processes in banded iron formation genesis

The voluminous 2.5 Ga banded iron formations (BIFs) from the Hamersley Basin (Australia) and Transvaal Craton (South Africa) record an extensive period of Fe redox cycling. The major Fe-bearing minerals in the Hamersley-Transvaal BIFs, magnetite and siderite, did not form in Fe isotope equilibrium, but instead reflect distinct formation pathways. The near-zero average δ⁵⁶Fe values for magnetite record a strong inheritance from Fe³⁺ oxide/hydroxide precursors that formed in the upper water column through complete or near-complete oxidation. Transformation of the Fe³⁺ oxide/hydroxide precursors to magnetite occurred through several diagenetic processes that produced a range of δ⁵⁶Fe values: (1) addition of marine hydrothermal , (2) complete reduction by bacterial dissimilatory iron reduction (DIR), and (3) interaction with excess that had low δ⁵⁶Fe values and was produced by DIR. Most siderite has slightly negative δ⁵⁶Fe values of ∼ −0.5‰ that indicate equilibrium with Late Archean seawater, although some very negative δ⁵⁶Fe values may record DIR. Support for an important role of DIR in siderite formation in BIFs comes from previously published C isotope data on siderite, which may be explained as a mixture of C from bacterial and seawater sources.Several factors likely contributed to the important role that DIR played in BIF formation, including high rates of ferric oxide/hydroxide formation in the upper water column, delivery of organic carbon produced by photosynthesis, and low clastic input. We infer that DIR-driven Fe redox cycling was much more important at this time than in modern marine systems. The low pyrite contents of magnetite- and siderite-facies BIFs suggests that bacterial sulfate reduction was minor, at least in the environments of BIF formation, and the absence of sulfide was important in preserving magnetite and siderite in the BIFs, minerals that are poorly preserved in the modern marine record. The paucity of negative δ⁵⁶Fe values in older (Early Archean) and younger (Early Proterozoic) BIFs suggests that the extensive 2.5 Ga Hamersley-Transvaal BIFs may record a period of maximum expansion of DIR in Earth’s history.     

Defect properties of albite

Knowledge of the defect properties of Lunar and Mercurian minerals has recently become important, with the advent of models which attempt to explain the formation of the thin exosphere of these celestial bodies. Here, we have calculated the formation energies of sodium and oxygen vacancies in the mineral albite (NaAlSi₃O₈), as well as the Schottky defect energy for the removal of a Na₂O unit. We have employed both the supercell and Mott–Littleton approaches, using Kohn–Sham density functional theory and classical interatomic potential methods. As well as reporting the defect energies and structures, we comment upon the relative merits of the methods used.