Peak Frequency Dynamics in Solar Microwave Bursts

We analyze the dynamics of the broadband frequency spectrum of 338 microwave bursts observed in the years 2001?–?2002 with the Owens Valley Solar Array. A subset of 38 strong microwave bursts that show a single spectral maximum are studied in detail. Our main goal is to study changes in spectral peak frequency ν _pk with time. We show that, for a majority of these simple bursts, the peak frequency shows a high positive correlation with flux density – it increases on the rise phase in ≈83% of 24 bursts where it could be cleanly measured, and decreases immediately after the peak time in ≈62% of 34 bursts. This behavior is in qualitative agreement with theoretical expectations based on gyrosynchrotron self-absorption. However, for a significant number of events (≈30?–?36%) the peak frequency variation is much smaller than expected from self-absorption, or may be entirely absent. The observed temporal behavior of ν _pk is compared with a simple model of gyrosynchrotron radio emission. We show that the anomalous behavior is well accounted for by the effects of Razin suppression, and further show how an analysis of the temporal evolution of ν _pk can be used to uniquely determine the relative importance of self-absorption and Razin suppression in a given burst. The analysis technique provides a new, quantitative diagnostic for the gyrosynchrotron component of solar microwave bursts. Applying this analysis technique to our sample of bursts, we find that in most of the bursts (60%) the spectral dynamics of ν _pk around the time of peak flux density is caused by self-absorption. On the other hand, for a significant number of events (≈70%), the Razin effect may play the dominant role in defining the spectral peak and dynamics of ν _pk, especially on the early rise phase and late decay phase of the bursts.     

Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.     

The Eltanin asteroid impact: possible South Pacific palaeomegatsunami footprint and potential implications for the Pliocene–Pleistocene transition

Large asteroid impacts are rare, and those into the deep ocean are rarer still. The Eltanin asteroid impact around 2.51 ± 0.07 Ma occurred at a time of great climatic and geological change associated with the Pliocene–Pleistocene boundary. Numerical models of the event indicate that a megatsunami was generated, although there is debate concerning its magnitude and the region‐wide extent of its influence. We summarise the existing evidence for possible Eltanin megatsunami deposits in Antarctica, Chile and New Zealand, while also examining other potential sites from several locations, mainly around the South Pacific region. In reviewing these data we note that these events were unfolding at the same time as those associated with the Pliocene–Pleistocene boundary and, as such, most of the geological evidence from that time has a climatic interpretation. The potential climatic and geological ramifications of the Eltanin asteroid impact, however, have failed to be considered by most researchers studying this time period. Although we are not advocating that all geological activity at that time is connected with the Eltanin asteroid impact, it raises interesting questions about the role potentially played by such catastrophic events in contributing to or even triggering epochal transitions. Copyright © 2012 John Wiley & Sons, Ltd.     

Survivorship and growth of Fucus gardneri after transplant to an acid mine drainage-polluted area

Acid mine drainage (AMD) from an abandoned copper mine at Britannia Beach, British Columbia, Canada, enters the marine environment through Britannia Creek. The surrounding intertidal zone is devoid of rockweed, Fucus gardneri Silva, a seaweed that dominates nearby shores. Rockweed plants were transplanted to the intertidal zone near Britannia Creek and monitored for changes in percent cover, survivorship, growth rate and Cu content. Autumn and winter transplants to within 100 m of Britannia Creek resulted in negative growth rates and high mortality within 57 days of exposure to AMD, with Cu levels in rockweed surpassing 2,300 ppm in dry tissue. Summer transplants to sites 300-700 m from Britannia Creek showed no consistent differences between AMD-exposed rockweed and control plants, possibly because the plants were stressed by desiccation. The results are consistent with ecological effects observed in other studies, and provide strong evidence for the role of AMD in excluding rockweed from the shores near Britannia Creek.     

Preliminary evidence for human fecal contamination in corals of the Florida Keys,USA

Corals and reef environments are under increased stress from anthropogenic activities, particularly those in the vicinity of heavily populated areas such as the Florida Keys. The potential adverse impacts of wastewater can affect both the environment and human health; however, because of the high decay rate of bacterial indicators in coral reef waters it has been difficult to document the presence of microbial contaminants and to assign risks in these environments. Here we show initial evidence that microorganisms associated with human feces are concentrated along the surface of coral heads relative to the overlying water column in the Florida Keys. Bacterial indicators (fecal coliform bacteria, enterococci or Clostridium perfringens) were detected in 66.7% of the coral surface microlayer (CSM) samples at levels between five and 1000 CFU/100 ml, but were found infrequently and at low numbers in the overlying water column ( < or = 2.5 CFU/100 ml). Similarly, enterovirus nucleic acid sequences, an indicator of human-specific waste, were detected in 93.3% of the CSM samples and only once in the water column by cell culture. Results show that coral mucus may accumulate enteric microorganisms in reef environments, and may indicate a risk to public and environmental health despite low indicator levels in the surrounding water.     

Reflection moveout inversion in azimuthally anisotropic media: accuracy, limitations and acquisition

Parameter estimation from the elliptical variations in the normal-moveout (NMO) velocity in azimuthally anisotropic media is sensitive to the angular separation between the survey lines in 2D, or equivalently, the source-to-receiver azimuth in 3D, and to the set of azimuths used in the inversion procedure. The accuracy in estimating the orientation of an NMO ellipse, in particular the parameter α, is also sensitive to the magnitude of anisotropy. On the other hand, the accuracy in estimating the semi-axes of the NMO-velocity ellipse is about the same for any magnitude of anisotropy.   To invert for the NMO ellipse parameters at least three NMO-velocity measurements along distinct azimuth directions are needed. In order to maximize the accuracy and stability in parameter estimation, it is best to have the azimuths for the three source-to-receiver directions 60° apart. Having more than three distinct source-to-receiver azimuths (e.g. full azimuthal coverage) provides a useful data redundancy that enhances the quality of the estimates.   In order to maximize quality in the inversion process, it is recommended to design the seismic data acquisition such that it contains small sectors (≤10°) with adequate fold and offset distribution.   Using three NMO-velocity measurements, 60° apart, an azimuthally anisotropic layer overlain by an azimuthally isotropic overburden (as might occur for fractured reservoirs) should have a relative thickness (in time) with respect to the total thickness at least equal to the ratio of the error in the NMO (stacking) velocity to the interval anisotropy of the fractured layer. Coverage along more than three azimuths, however, improves this limitation, which is imposed by Dix differentiation, by at most 50%, depending on the number of observations (NMO velocities) that enter the inversion procedure.     

Pilot‐scale field validation of the long electrode electrical resistivity tomography method

A validation experiment, carried out in a scaled field setting, was attempted for the long electrode electrical resistivity tomography method in order to demonstrate the performance of the technique in imaging a simple buried target. The experiment was an approximately 1/17 scale mock‐up of a region encompassing a buried nuclear waste tank on the Hanford site. The target of focus was constructed by manually forming a simulated plume within the vadose zone using a tank waste simulant. The long electrode results were compared to results from conventional point electrodes on the surface and buried within the survey domain. Using a pole‐pole array, both point and long electrode imaging techniques identified the lateral extents of the pre‐formed plume with reasonable fidelity but the long electrode method was handicapped in reconstructing vertical boundaries. The pole‐dipole and dipole‐dipole arrays were also tested with the long electrode method and were shown to have the least favourable target properties, including the position of the reconstructed plume relative to the known plume and the intensity of false positive targets. The poor performance of the pole‐dipole and dipole‐dipole arrays was attributed to an inexhaustive and non‐optimal coverage of data at key electrodes, as well as an increased noise for electrode combinations with high geometric factors. However, when comparing the model resolution matrix among the different acquisition strategies, the pole‐dipole and dipole‐dipole arrays using long electrodes were shown to have significantly higher average and maximum values within the matrix than any pole‐pole array. The model resolution describes how well the inversion model resolves the subsurface. Given the model resolution performance of the pole‐dipole and dipole‐dipole arrays, it may be worth investing in tools to understand the optimum subset of randomly distributed electrode pairs to produce maximum performance from the inversion model.     

GhostNet marine debris survey in the Gulf of Alaska--satellite guidance and aircraft observations

Marine debris, particularly debris that is composed of lost or abandoned fishing gear, is recognized as a serious threat to marine life, vessels, and coral reefs. The goal of the GhostNet project is the detection of derelict nets at sea through the use of weather and ocean models, drifting buoys and satellite imagery to locate convergent areas where nets are likely to collect, followed by airborne surveys with trained observers and remote sensing instruments to spot individual derelict nets. These components of GhostNet were first tested together in the field during a 14-day marine debris survey of the Gulf of Alaska in July and August 2003. Model, buoy, and satellite data were used in flight planning. A manned aircraft survey with visible and IR cameras and a LIDAR instrument located debris in the targeted locations, including 102 individual pieces of debris of anthropogenic or terrestrial origin.     

Local and landscape effects on spatial patterns of mangrove forest during wetter and drier periods: Moreton Bay,Southeast Queensland,Australia

Land use/cover and mangrove spatial changes were assessed for ten sites and their sub-catchments in Southeast Queensland, Australia. Two time periods were involved: 1972–1990, a period of relatively high rainfall, and 1990–2004, which was significantly drier. Aerial photographs and Landsat satellite imagery were used to map the inter-tidal wetlands and classify the land use/cover in the sub-catchments. A Maximum Likelihood Classification was used to map three types of land cover: agriculture, built-up and plantation forest. Mangroves (mainly Avicennia marina) were the focus as they have been recorded over recent decades encroaching into salt marsh. The Mangrove-Salt marsh Interface (MSI) Index was developed to quantify the relative opportunity for mangroves to expand into salt marshes, based on the shared boundary between them. The index showed a consistent relationship with mangrove expansion and change. To address problems of high dimensionality and multi-collinearity of predictor variables, a Partial Least Squares Regression (PLSR) model was used. A key finding of this research was that the contribution of environmental variables to spatial changes in the mangroves was altered following a reduction in rainfall. For example, agriculture had more influence on mangrove expansion and change during the wet period than during the dry period.