二维地电条件下充电法地形改正的一种方法

本文首先讨论了充电法地形改正方法及存在的问题，提出了一种基于比值法思想的地改方法，经理论模型验算表明，有较好的地改效果     

Study of sporadic-E clouds by backscatter radar

It is shown that swept-frequency backscatter ionograms covering a range of azimuths can be used to study the dynamics of sporadic-E clouds. A simple technique based on analytic ray tracing can be used to simulate the observed narrow traces associated with E_s patches. This enables the location and extent of the sporadic-E clouds to be determined. The motion of clouds can then be determined from a time sequence of records. In order to demonstrate the method, results are presented from an initial study of 5 days of backscatter ionograms from the Jindalee Stage B data base obtained during March-April 1990. Usually 2–3 clouds were observed each day, mainly during the evening and up to midnight. The clouds lasted from 1–4 h and extended between 30°–80° in azimuth and 150–800 km in range. The clouds were mostly stationary or drifted generally westward with velocities of up to 80 ms^–1. Only one cloud was observed moving eastward.     

A reexamination of the valley wind system in the Alpine Inn Valley with numerical simulations

Summary This paper presents idealized numerical simulations of the valley wind circulation in the Alpine Inn Valley, which are compared with existing data and are used to improve our dynamical understanding of the valley wind. The simulations have been performed with the Penn State/NCAR mesoscale model MM5. They use a high-resolution realistic topography but idealized large-scale conditions without any synoptic forcing to focus on the thermally induced valley wind system. The comparison with the available observations shows that this simplified set-up is sufficient to reproduce the essential features of the valley wind.The results show that the tributaries of the Inn Valley have a considerable impact on the along-valley mass fluxes associated with the valley wind circulation. The upvalley mass flux is found to increase where tributaries enter the Inn Valley from the north, that is, from the direction where the Alpine foreland is located. On the other hand, the upvalley mass flux is reduced at the junctions with southern tributaries because part of the upvalley flow is deflected into these tributaries. For the downvalley flow, the situation is essentially reversed, but the influence of the valley geometry on the flow structure is larger than for the upvalley flow. The most important feature is a lateral valley contraction near the valley exit into the Alpine foreland. It reduces the downvalley mass flux at low levels, so that the wind maximum in the interior of the valley is shifted to a fairly large distance from the ground. North of the valley contraction, however, the downvalley flow strongly accelerates and forms a pronounced low-level jet. A dynamical analysis indicates that this acceleration can be interpreted as a transition from subcritical to supercritical hydraulic flow. Another interesting feature is that the low-level jet maintains its structure for several tenths of kilometres into the Alpine foreland. This appears to be related to the fact that the lateral wind shear on the flanks of the jet is associated with a strong dipole of potential vorticity (PV). Due to the conservation properties of the PV, the downstream advection of the PV dipole leads to the formation of a band-like feature that decays fairly slowly.     

Global monsoons in the mid-Holocene and oceanic feedback

The response of the six major summer monsoon systems (the North American monsoon, the northern Africa monsoon, the Asia monsoon, the northern Australasian monsoon, the South America monsoon and the southern Africa monsoon) to mid-Holocene orbital forcing has been investigated using a coupled ocean–atmosphere general circulation model (FOAM), with the focus on the distinct roles of the direct insolation forcing and oceanic feedback. The simulation result is also found to compare well with the NCAR CSM. The direct effects of the change in insolation produce an enhancement of the Northern Hemisphere monsoons and a reduction of the Southern Hemisphere monsoons. Ocean feedbacks produce a further enhancement of the northern Africa monsoon and the North American monsoon. However, ocean feedbacks appear to weaken the Asia monsoon, although the overall effect (direct insolation forcing plus ocean feedback) remains a strengthened monsoon. The impact of ocean feedbacks on the South American and southern African monsoons is relatively small, and therefore these regions, especially the South America, experienced a reduced monsoon regime compared to present. However, there is a strong ocean feedback on the northern Australian monsoon that negates the direct effects of orbital changes and results in a strengthening of austral summer monsoon precipitation in this region. A new synthesis is made for mid-Holocene paleoenvironmental records and is compared with the model simulations. Overall, model simulations produce changes in regional climates that are generally consistent with paleoenvironmental observations.     

The ACPI Climate Change Simulations

The Parallel Climate Model (PCM) has been used in the Accelerated ClimatePrediction Initiative (ACPI) Program to simulate the global climateresponse to projected CO₂, sulfate, and other greenhouse gasforcingunder a business-as-usual emissions scenario during the 21st century. In these runs, the oceans were initialized to 1995 conditions by a group from the Scripps Institution of Oceanography and other institutions. An ensemble of three model runs was then carried out to the year 2099 using the projected forcing. Atmospheric data fromthese runs were saved at 6-hourly intervals (hourly for certain criticalfields) to support the ACPI objective of accurately modeling hydrologicalcycles over the western U.S. It is shown that the initialization to1995 conditions partly removes the un-forced oceanic temperature and salinity drifts that occurred in the standard 20th century integration. The ACPI runs show a global surface temperature increase of 3–8 °C over northern high-latitudes by the end of the 21st century, and 1–2 °C over the oceans. This is generally within ±0.1°Cof model runs without the 1995 ocean initialization. The exception is in theAntarctic circumpolar ocean where surface air temperature is cooler in theACPI run; however the ensemble scatter is large in this region. Althoughthe difference in climate at the end of the 21st century is minimalbetween the ACPI runs and traditionally spun up runs, it might be largerfor CGCMs with higher climate sensitivity or larger ocean drifts. Ourresults suggest that the effect of small errors in the oceans (such asthose associated with climate drifts) on CGCM-simulated climate changesfor the next 50–100 years may be negligible.     

Estimation of Site Effects in Beijing City

— For the realistic modeling of the seismic ground motion in lateral heterogeneous anelastic media, the database of 3-D geophysical structures for Beijing City has been built up to model the seismic ground motion in the City, caused by the 1976 Tangshan and the 1998 Zhangbei earthquakes. The hybrid method, which combines the modal summation and the finite-difference algorithms, is used in the simulation. The modeling of the seismic ground motion, for both the Tangshan and the Zhangbei earthquakes, shows that the thick Quaternary sedimentary cover amplifies the peak values and increases the duration of the seismic ground motion in the northwestern part of the City. Therefore the thickness of the Quaternary sediments in Beijing City is the key factor controling the local ground effects. Four zones are defined on the base of the different thickness of the Quaternary sediments. The response spectra for each zone are computed, indicating that peak spectral values as high as 0.1 g are compatible with past seismicity and can be well exceeded if an event similar to the 1697 Sanhe-Pinggu occurs.     

Geophysical exploration for interlayer slip breccia gold deposits: example from Pengjiakuang gold deposit, Shandong Province, China

Interlayer slipping breccia‐type gold deposit – a new type of gold deposit, defined recently in the northern margin of the Jiaolai Basin, Shandong Province, China – occurs in interlayer slip faults distributed along the basin margin. It has the features of large orebody thickness (ranging from 14 m to 46 m, with an average thickness of 30 m), shallow embedding (0–50 m thickness of cover), low tenor of gold ore (ranging from 3 g/t to 5 g/t), easy mining and ore dressing. This type of gold deposit has promising metallogenic forecasting and potential for economic exploitation. A ground gamma‐ray survey in the Pengjiakuang gold‐ore district indicates that the potassium/thorium ratio is closely related to the mineralization intensity, i.e. the larger the potassium/thorium ratio, the higher the mineralization. The gold mineralized alteration zone was defined by a potassium/thorium ratio of 0.35. A seismic survey confirms the location of the top and bottom boundaries and images various features within the Pengjiakuang gold mineralization belt. The gold‐bearing shovel slipped belt dips to the south at an angle of 50–55° at the surface and 15–20° at depth. The seismic profile is interpreted in terms of a structural band on the seismic section characterized by a three‐layered model. The upper layer is represented by weakly discontinuous reflections that represent the overlying conglomerates. A zone of stronger reflections representing the interlayer slip fault (gold‐bearing mineralized zone) is imaged within the middle of the section, while the strongest reflections are in the lower part of the section and represent metamorphic rocks at depth. At the same time, the seismic reflection survey confirms the existence of a granite body at depth, indicating that ore‐forming fluids may be related to the granite. A CSAMT survey showed that the gold‐bearing mineralized zone is a conductive layer and contains a low‐resistivity anomaly ranging from 2 Ωm to 200 Ωm.     

Focal mechanism dependence of static stress triggering of earthquakes

We perform a global statistical investigation into the problem of Coulomb stress triggering of earthquakes by using the Harvard CMT catalogue of shallow earthquakes from 1976 to 2001. We consider ‘earthquake pairs’, i.e., pairs of successive earthquakes occurring near each other with similar focal mechanisms, and address the problem of whether or not the change of the Coulomb failure stress (CFS) produced by the first earthquake of the pair ‘encourages’ the occurrence of the second one. An interesting feature is that such a Coulomb stress-triggering phenomenon has an apparent focal mechanism dependence: for thrust earthquakes, a more evident triggering effect can be observed.