Transform-normal extension on the Northern Death Valley fault system, California-Nevada

The Northern Death Valley fault zone is a major right-lateral structure that has accommodated 70 km or more of regional transtensional deformation in Tertiary to Recent time. Extension parallel to its north-west transport direction in the Death Valley region of California has produced ‘pull-apart’ structures that are responsible for opening the central Death Valley rhombochasm. In several ranges along the length of the Northern Death Valley fault zone, there is also evidence for extension directed to the south-west, normal to strike-slip movement. Evidence from the Funeral, Grapevine and Cottonwood Mountains suggests that a significant amount of down-dip slip has occurred on the Northern Death Valley fault zone and parallel structures (together referred to as the Northern Death Valley fault system) coeval with the majority of right-lateral slip and transform-parallel extension. As a result of both these components of extension, a separate basin opened in northern Death Valley with an orientation and architecture very different from that of central Death Valley. In addition, the Northern Death Valley fault system may be responsible for the present topography of the Funeral and Grapevine Mountains. Transform-normal extension appears to be the result of a misorientation of the Northern Death Valley fault zone within the regional stress field over the past 6 Myr, as suggested by simple geometric calculations.     

Rates of aerodynamic entrainment in a developing boundary layer

Despite its significance for inception of grain transport by wind, the initial dislodgement of grains from a static surface by aerodynamic forces of drag and lift in the absence of grain collision has received little attention. This paper describes a series of wind-tunnel experiments in which the erosion of narrow strips of loose grains from the roughened surface of a flat plate exposed to a range of wind speeds was examined. The progressive downwind development of the boundary layer over the plate provided a range of airflow conditions which permitted systematic evaluation of grain entrainment rates arising from purely aerodynamic forces. Use of closely graded size fractions in flat, single grain layers resting on identical, fixed grain support eliminated the effects of surface irregularities and impacts from saltation. Results show that erosion of strips of loose grains develops with time according to an inverse exponential function in which the entrainment rate time constant relates to Shields dimensionless shear stress function. An empirical expression defining aerodynamic entrainment rate in terms of rate of strip erosion is derived and comparisons are made between present and published data. The need for additional data to resolve several questions raised by the present investigation is stressed. In addition, a simple, objective technique for accurate determination of the aerodynamic entrainment threshold of any loose, granular sediment is proposed.     

Lake Hoare, Antarctica: sedimentation through a thick perennial ice cover

Lake Hoare in the Dry Valleys of Antarctica is covered with a perennial ice cover more than 3 m thick, yet there is a complex record of sedimentation and of growth of microbial mats on the lake bottom. Rough topography on the ice covering the lake surface traps sand that is transported by the wind. In late summer, vertical conduits form by melting and fracturing, making the ice permeable to both liquid water and gases. Cross-sections of the ice cover show that sand is able to penetrate into and apparently through it by descending through these conduits. This is the primary sedimentation mechanism in the lake. Sediment traps retrieved from the lake bottom indicate that rates of deposition can vary by large amounts over lateral scales as small as 1 m. This conclusion is supported by cores taken in a 3 × 3 grid with a spacing of 1.5 m. Despite the close spacing of the cores, the poor stratigraphic correlation that is observed indicates substantial lateral variability in sedimentation rate. Apparently, sand descends into the lake from discrete, highly localized sources in the ice that may in some cases deposit a large amount of sand into the lake in a very short time. In some locations on the lake bottom, distinctive sand mounds have been formed by this process. They are primary sedimentary structures and appear unique to the perennially ice-covered lacustrine environment. In some locations they are tens of centimetres high and gently rounded with stable slopes; in others they reach ～ 1 m in height and have a conical shape with slopes at angle of repose. A simple formation model suggests that these differences can be explained by local variations in water depth and sedimentation rate. Rapid colonization and stabilization of fresh sand surfaces by microbial mats composed of cyanobacteria, eukaryotic algae, and heterotrophic bacteria produces a complex intercalation of organic and sandy layers that are a distinctive form of modern stromatolites.     

The diagenesis of the late Dinantian Derbyshire-East Midland carbonate shelf, central England

Carbonate cements in late Dinantian (Asbian and Brigantian) limestones of the Derbyshire carbonate platform record a diagenetic history starting with early vadose meteoric cementation and finishing with burial and localized mineral and oil emplacement. The sequence is documented using cement petrography, cathodoluminescence, trace element geochemistry and C and O isotopes. The earliest cements (Pre-Zone 1) are locally developed non-luminescent brown sparry calcite below intrastratal palaeokarsts and calcretes. They contain negligible Fe, Mn and Sr but up to 1000 ppm Mg. Their isotopic compositions centre around δ¹⁸O =?8.5‰, δ¹³C=?5.0‰. Calcretes contain less ¹³C. Subsequent cements are widespread as inclusion-free, low-Mg, low-Fe crinoid overgrowths and are described as having a‘dead-bright-dull’cathodoluminescence. The‘dead’cements (Zone 1) are mostly non-luminescent but contain dissolution hiatuses overlain by finely detailed bright subzones that correlate over several kilometres. Across‘dead'/bright subzones there is a clear trend in Mg (500–900 ppm), Mn (100–450 ppm) and Fe (80-230 ppm). Zone 1 cements have isotopic compositions centred around δ¹⁸O =?8.0‰ and δ¹³C=?2.5‰. Zone 2 cement is bright, thin and complexly subzoned. It is geochemically similar to bright subzones of Zone 1 cements. Dull Zone 3 cement pre-dates pressure dissolution and fills 70% or more of the pore space. It generally contains little Mn, Fe and Sr but can have more than 1000 ppm Mg, increasing stratigraphically upwards. The δ¹⁸O compositions range from ?5.5 to ?15‰ and the δ¹³C range is ?1 to + 3.2^0/00. Zone 4 fills veins and stylolite seams in addition to pores. It is synchronous with Pb, Ba, F ore mineralization and oil migration. Zone 4 is ferroan with around 500 ppm Fe, up to 2500 ppm Mg and up to 1500 ppm Mn. Isotopic compositions range widely; δ¹⁵O =?2.7 to ?9‰ and δ¹³C=?3.8 to+2.50‰. Unaltered marine brachiopods suggest a Dinantian seawater composition around δ¹⁵O = 0‰ (SMOW), but vital isotopic effects probably mask the original δ¹³C (PDB) value. Pre-Zone 1 calcites are meteoric vadose cements with light soil-derived δ¹³C and light meteoric δ¹⁸O. An unusually fractionated‘pluvial’δ¹⁵O(SMOW) value of around — 6‰ is indicated for local Dinantian meteoric water. Calcrete δ¹⁸O values are heavier through evaporation. Zone 1 textures and geochemistry indicate a meteoric phreatic environment. Fe and Mn trends in the bright subzones indicate stagnation, and precipitation occurred in increments from widespread cyclically developed shallow meteoric water bodies. Meteoric alteration of the rock body was pervasive by the end of Zone 1 with a general resetting of isotopic values. Zone 3 is volumetrically important and external sources of water and carbonate are required. Emplacement was during the Namurian-early Westphalian by meteoric water sourced at a karst landscape on the uplifted eastern edge of the Derbyshire-East Midland shelf. The light δ¹⁸O values mainly reflect burial temperatures and an unusually high local heat flow, but an input of highly fractionated hinterland-derived meteoric water at the unconformity is also likely. Relatively heavy δ¹³C values reflect the less-altered state of the source carbonate and aquifer. Zone 4 is partly vein fed and spans burial down to 2000 m and the onset of tectonism. Light organic-matter-derived δ¹³C and heavy δ¹⁸O values suggest basin-derived formation water. Combined with textural evidence of geopressures, this relates to local high-temperature ore mineralization and oil migration. Low water-to-rock ratios with host-rock buffering probably affected the final isotopic compositions of Zone 4, masking extremes both of temperature and organic-matter-derived CO₂.     

The character of seismo-turbidites in the S-1 sapropel, Zakinthos and Strofadhes basins, Greece

The early Holocene S-1 sapropelic sequence in the northwest Hellenic Trench has been studied in six piston cores from the Zakinthos and Strofadhes basins. The S-1 sequence, 0.7-3.5 m thick, consists principally of silt to mud turbidites, with rare, thick, disorganized, sandy turbidites. These lithofacies are described and compared with fine-grained turbidites from the literature. Petrographical data, including the abundance of organic carbon and planktonic microfossils, indicate that the principal source of sediment to the turbidites was from the continental slope. On the basis of composition and texture, five turbidite units can be correlated between the two basins. These basins are fed by separate but adjacent drainage systems. The apparently synchronous occurrence of turbidites in the two drainage systems suggests that the turbidity currents were seismically triggered. Some of the turbidites show poorly organized beds which may reflect the slump origin and the short (30 km) distances of travel. Turbidites were deposited more frequently in the S-1 sapropelic interval than in the over- and underlying sediments. Application of slope stability analysis shows that on the 8° slopes above the basins, a 10-cm-thick sapropel would have a factor of safety of about 2, and would fail with earthquake accelerations in excess of 0.08 g. The frequency of earthquakes likely to produce such accelerations is similar to the observed frequency of turbidites. The low strength of the sapropelic sediment makes it particularly susceptible to such failure. Similar thin-skinned slumping may be an important process for the initiation of turbidity currents in other environments where there are steep slopes or high sedimentation rates.     

Aerodynamic entrainment threshold: effects of boundary layer flow conditions

Experimental data are presented demonstrating the influence of boundary layer flow conditions on aerodynamic entrainment of grains in the absence of intersaltation collisions. New methods are proposed for (1) the unambiguous determination of aerodynamic threshold for any grain population and (2) approximation of the probability density function (PDF) distributions of threshold shear velocity for aerodynamic entrainment. In wind tunnel experiments, the orderly spatial development of flow conditions within a developing boundary layer over the roughened surface of a flat plate constrains the aerodynamic threshold condition in terms of both mean and fluctuating values. Initial grain dislodgements and subsequent erosion from narrow strips of loose, finely fractionated ballotini were recorded photographically as wind speed was increased. Boundary layer parameters, including average threshold shear velocity (U_*t), were calculated using the momentum integral method. Direct observations show that sporadic oscillation of grains preceded dislodgement. At slightly higher velocities most grains rolled over their neighbours before entering saltation. Initial entrainment in spatially semi-organized flurries of 50 or more grains was followed by quiescent periods at airflow velocities close to threshold. These observations provide strong circumstantial evidence linking both the nature and spatial pattern of initial grain motions to sweep events during the fluid bursting process. For each grain fraction, values of U_*t were found to span an unexpectedly wide range and to decrease downwind from the leading edge of the plate as turbulence intensity increased. A probabilistic entrainment model is applied to the aerodynamic threshold condition so as to incorporate the effects of changing turbulent flow regimes over the plate. Analysis of strip erosion curves gives both an objective definition of the threshold condition and usable approximations of the PDF for U_*t required by the model and for future stochastic treatment of the threshold condition.     

Sea level control of stacked late Quaternary coastal sequences, central Great Barrier Reef

Lithofacies analysis, pollen assemblages and radiocarbon age dates of 20 stratigraphic drill holes are used to develop an evolutionary history for late Quaternary sedimentation in two coastal embayments landward of the central Great Barrier Reef. Different physiographic settings of the embayments result in two contrasting styles of sedimentary sequence: (a) an exposed, moderate energy, beach barrier-lagoon system (Wyvuri Embayment) and (b) a protected, low energy, muddy inlet fill sequence (Mutchero Inlet). Despite sharp contrast in sequence style, similar depositional cycles occur in both embayments in response to late Quaternary sea level fluctuations including: (1) a last interglacial highstand (+2 m; c. 125 000 yr bp ) beach barrier (Wyvuri); (2) an early to mid-Holocene (8000–6100 yr bp ) transgressive beach barrier-lagoon (Wyvuri) and estuarine infill (Mutchero); and (3) mid-Holocene to present highstand beach barrier (Wyvuri) and estuarine (Mutchero) progradation. Preservation of such cycles in the stratigraphic record would produce a series of vertically stacked and offset linear barrier sands surrounded by lagoonal mud and fine grained shoreface sediment juxtaposed to muddy, estuarine infills. Sea level elevations are well recorded by the upward transition from Rhizophora-dominated intertidal mangrove mud to freshwater swamp (clearly identified by pollen analysis) and by the basal contacts of beach barrier sediments which sharply overlie the upper shoreface. Transgressive sedimentation is interrupted in both embayments by a constructional beach barrier (Wyvuri) and abbreviated progradation (Mutchero) corresponding to a — 5 m pause in relative sea level rise at c. 6800 yr bp . Sea level control of fine scale coastal sedimentation patterns is beginning to be widely recognized and provides an accurate analogue for stacked ancient sequences.     

Late Weichselian glaciation history of the northern North Sea

Based on new data from the Fladen, Sleipner and Troll areas, combined with earlier published results, a glaciation curve for the Late Weichselian in the northern North Sea is constructed. The youngest date on marine sedimentation prior to the late Weichselian maximum ice extent is 29.4 ka BP. At this time the North Sea and probably large parts of southern Norway were deglaciated (corresponding to the Alesund interstadial in western Norway). In a period between 29.4 and c. 22 ka BP, the northern North Sea experienced its maximum Weichselian glaciation with a coalescing British and Scandinavian ice sheet. The first recorded marine inundation is found in the Fladen area where marine sedimentation started close to 22 ka BP. After this the ice fronts receded both to the east and west. The North Sea Plateau, and possibly parts of the Norwegian Trench, were ice-free close to 19.0 ka, and after this a short readvance occurred in this area. This event is correlated with the advance recorded at Dimlington, Yorkshire, and the corresponding climatostratigraphic unit is denoted the Dimlington Stadial (18.5 ka to 15.1 ka). The Norwegian Trench was deglaciated at 15.1 ka in the Troll area. The data from the North Sea, together with the results from Andwa, northern Norway (Vorren et al . 1988; Møller et al . 1992), suggest that the maximum extent of the last glaciation along the NW-European seaboard from the British Isles to northern Norway was prior to c . 22 ka BP.