Acoustic Monitoring of Gas Emission Processes in the Arctic Shelf Seas

Oceanology - The emission of natural gas from the seafloor to the surface in shelf areas of the Arctic seas is of increasing interest among researchers. Recently, various types of acoustic...     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

The impact of shrimp trawling and associated sediment resuspension in mud dominated, shallow estuaries

To address the relative importance of shrimp trawling on seabed resuspension and bottom characteristics in shallow estuaries, a series of disturbance and monitoring experiments were conducted at a bay bottom mud site (2.5 m depth) in Galveston Bay, Texas in July 1998 and May 1999. Based on pre- and post-trawl sediment profiles of ⁷Be; pore water dissolved oxygen and sulfide concentration; and bulk sediment properties, it was estimated that the trawl rig, including the net, trawl doors, and “tickler chain,” excavate the seabed to a maximum depth of approximately 1.5 cm, with most areas displaying considerably less disturbance. Water column profile data in the turbid plume left by the trawl in these underconsolidated muds (85–90% porosity; <0.25 kPa undrained shear strength) demonstrate that suspended sediment inventories of up to 85–90 mg/cm² are produced immediately behind the trawl net; an order of magnitude higher than pre-trawl inventories and comparable to those observed during a 9–10 m/s wind event at the study site. Plume settling and dispersion caused suspended sediment inventories to return to pre-trawl values about 14 min after trawl passage in two separate experiments, indicating particles re-settle primarily as flocs before they can be widely dispersed by local currents. As a result of the passage of the trawl rig across the seabed, shear strength of the sediment surface showed no significant increase, suggesting that bed armoring is not taking place and the trawled areas will not show an increase in critical shear stress.     

Environmental overview of Eckernförde Bay,northern Germany

This environmental overview of Eckernförde Bay (northern Germany) summarizes the results of previous studies relevant to the Office of Naval Research's Coastal Benthic Boundary Layer (CBBL) Baltic field exercise conducted during 1993–1994. Significant environmental characteristics include the following: (1) surface sediment distribution is related to water depth, dictated primarily by hydrodynamic reworking of older glacial deposits; (2) the origin and characteristics of small-scale sedimentary structures depend on storm-generated waves and currents; (3) the proximity of the sea surface and sediment —water interface results in a pelagic—benthic coupling that drives biogeochemical processes and produces organicrich, acoustically turbid sediments; and (4) the bay floor is complicated topographically by pockmarks and manmade sedimentary structures.     

Transverse vibrations of a rectangular cantilever plate with thickness varying in a discontinuous fashion

A numerical solution is obtained for the title problem by means of the popular finite element method. An experimental investigation of the problem is also presented for plates of square planform. The agreement between theoretical and experimental values is very good in the case of the fundamental frequency, and reasonably good when the second and third normal modes of transverse vibration are considered. It is concluded that beneficial effects are obtained in the sense that one generates a lighter structural element with higher fundamental frequency of transverse vibration. Hence, dynamic stiffening is achieved.     

Shell growth and oxygen isotopes in the topshell Osilinus turbinatus: resolving past inshore sea surface temperatures

Shells of the rocky shore intertidal gastropod Osilinus turbinatus (von Born), often abundant in archaeological deposits in the Mediterranean region, are a potential source of data on palaeotemperature, palaeoseasonality and archaeological seasonality. To evaluate this species as a climate archive, investigations of annual patterns of shell growth and of monthly variations in oxygen isotopes in shell carbonates were made on different populations in NW Sicily. Mark-recapture experiments at San Vito lo Capo and Mazzaforno show that O. turbinatus grows almost continuously throughout the year but at different rates in different seasons. Around 75% of the yearly shell growth occurs in the autumn and winter. On average, larger/older shells produce narrower annual growth increments than smaller/younger ones. Conspicuous growth lines in larger/older shells show that growth stops during the hottest part of the summer. Oxygen isotope analyses on monthly collected shells of O. turbinatus from three shores (Cala Grande, Monte Cofano and Mazzaforno) show that the isotope values record temperature variations through the year. In all the datasets, surface seawater temperatures (SSTs) calculated from δ¹⁸O_SHELL mostly underestimate measured SSTs, offsets being generally greater in summer. Minimum annual offsets range from 0.0°C to 0.7°C and maximum annual offsets from 3.1°C to 8.7°C. δ¹⁸O_SHELL values fail to record temperatures higher than 25°C. Careful selection of shells to be analysed can reduce offsets between δ¹⁸O_SHELL temperature estimates and measured SSTs for many parts of the year, except the hottest. Allowing for this, shells of O. turbinatus offer good potential as climate archives and for archaeological studies of seasonal patterns of human foraging for shellfish.     

Otolith chemical signature and growth of Chaetodon speculum in coastal areas of New Caledonia

Coral reefs are one of the most diverse ecosystems on Earth. They are currently exposed to increasing levels of anthropogenic perturbations. Several recent reviews point to the lack of good indicators for these perturbations especially to monitor their effects on fish populations or fish assemblages. The SW lagoon of New Caledonia is an ideal location to test indicator species in this context as contrasting sites are present within a small geographical range. This study analysed fish from four sites, one with heavy industrial pollution, another dominated by domestic waste, a third with historic mining activities, and the fourth as a control. The butterfly fish, Chaetodon speculum, was chosen to determine C. speculum's potential as an indicator species due to its link to coral, its sedentary behaviour and its wide geographical distribution. The size distribution, growth rate, age distribution and whole otolith composition were analysed at each site. Age and mean growth rate were analysed from daily increments of the otoliths. The concentrations of eight elements (Li, Mg, Co, Ni, Cu, Rb, Sr, and Ba) were measured by ICP-MS in the otoliths of a subset of individuals. The sites under anthropogenic impact were distinct from the control site by fish size frequencies, age distributions, and the chemical content of their otoliths. The chemical elements Mg, Co, Ni, Cu, and Rb showed differences amongst sites. Fish belonging to the sites furthest from Nouméa could be discriminated in nearly 80% of samples or 60% of the cases when otolith weight or fish age respectively were taken into account. Ni concentrations of the otoliths were also higher in the bays where water concentrations of this element were known to be higher, but these differences were no longer significant once corrected for otolith weight. These results should be mitigated by the fact that: (1) despite significant differences between sites in age distribution and size frequencies there were no differences in growth rates or body condition; (2) differences in age or size were not correlated to perturbation levels; and (3) discrimination between sites based on chemical levels in the otoliths, even though significant, was not sufficient to identify the origin of the fish at a level useful for screening tests. The hypothesis that environmental differences between sites would be reflected in the otolith chemical composition is therefore not fully supported by our results.     

Propagation of storm microseisms at the ocean-continent boundary

Several anomalous phenomena related to the measurement of storm microseisms in northwestern Europe and on Greenland have been considered. It has been indicated that these phenomena can be explained by analyzing the microseism propagation in oceanic waveguides in the regions of abyssal plains and transformation on continental slopes of different steepness. A model of the oceanic waveguide with an inclined elastic bottom has been presented. An analysis of the family of dispersion dependences for such a model makes it possible to find an explanation for the specific features of microseism field transformation at the ocean-continent boundary into Rayleigh waves propagating on the land.