A new, instantaneous aeolian sand trap design for field use

A new aeolian sediment trap is described which can give up to 1 Hz measurement frequency in field conditions. The trap adopts a circular, horizontal trap design with a load cell connection to give continuous, unobtrusive trap measurement of sediment flux. Simultaneous velocity recording is carried out using an anemometer. Trap construction costs are approximately £200. Initial results in field conditions using a direct comparison of wind velocity data, sampled at an equivalent frequency, have given a first-order relationship between sediment flux and velocity. The trap enables simultaneous sampling of wind velocity and sediment flux at a sufficiently short interval to enable investigation of sediment transport dynamics under a variety of field conditions.     

Characterisation of brown coal humic acids and modified humic acids using pyrolysis gcms and other techniques

It has been proposed that Victorian brown coal can be considered as a two-component structure — a lignocellulosic “host”, containing various amounts of weakly bound or entrapped “guest” material together with very small amounts of inorganic and/or mineral matter. The latter predominantly consists of wax esters and/or terpenoid material. In this paper we describe attempts to gain structural information regarding the more complex, “host” component of the coal. Our initial model compound has been humic acid that can be readily obtained from the coal by alkaline extraction. It has been found that “pure” humic acid, free from material associated with the “guest” components of the coal, can be obtained by a highly selective, low-yielding alkaline extraction. This humic acid has been studied by nmr spectroscopy and pyrolysis gas chromatography-mass spectroscopy (py-gc/ms). The products arising from py-gc/ms have been compared with those obtained from similar pyrolysis of whole coals. Alkylation of humic acids using alkyl halides in the presence of base has been successfully carried out and reactivity of the resulting materials compared with those of the parent coal and humic acid.     

Geologic framework for the coal-bearing rocks of the Central Appalachian Basin

Coal production has been an important economic factor in the Central Appalachian Basin. However, regional stratigraphic and structural relationships of the coal-bearing rocks of the basin have been poorly understood due to numerous separate nomenclatural schemes employed by various states. In order to estimate coal resources and understand mechanisms controlling the distribution of coal within the basin, a reliable geologic framework is necessary. Seven detailed cross sections across the Central Appalachian Basin were constructed in order to examine the stratigraphic and structural framework of the coal-bearing rocks in the basin. The cross sections were based on more than 1000 oil and gas well logs, measured sections, and borehole information from Kentucky, Ohio, Tennessee, Virginia and West Virginia.The cross sections revealed three main points discussed here: southeast thickening of the Pennsylvanian strata, uncomfortable northwestward onlapping relationship of Lower Pennsylvanian strata over underlying Lower Pennsylvanian and Mississippian strata and regional continuity of beds. The cross sections, geologic mapping, coal-resource studies, extensive new highway exposures and the occurrence of tonstein beds indicate that many coal beds and marine strata are laterally extensive, albeit locally variable across the basin. Certain quartzose sandstone bodies are also extensive over large areas of the basin.Existing stratigraphic nomenclature schemes obscured the geologic framework of the basin, so a new unified nomenclature scheme was devised to better describe stratigraphic features of the basin. The new stratigraphic nomenclature, now only formalized for Kentucky, was based on key stratigraphic units that proved to be extensive across the basin. Lower and Middle Pennsylvanian rocks are now recognized as the Breathitt Group (the Breathitt Formation was elevated to group rank). The Breathitt Group was subdivided into eight coal-bearing formations by relatively thick marine strata, and, in the lower part of the Breathitt Group, by quartzose sandstone formations. The new coal-bearing units are formally ranked as formations and, in ascending order, are the Pocahontas, Bottom Creek, Alvy Creek, Grundy, Pikeville, Hyden, Four Corners and Princess Formations. The quartzose sandstone units are also formally ranked as formations and are, in ascending order, the Warren Point, Sewanee, Bee Rock and Corbin Sandstones. The sandstone formations were previously recognized units in some states, but have been extended (formally in Kentucky) across the basin. The key stratigraphic marine units are formally ranked as members, and are, in ascending order, the Betsie Shale Member, the Kendrick Shale Member, Magoffin Member and Stoney Fork Member.     

Palaeomagnetic study of Archaean Banded Hematite Jasper Rocks from the Singhbhum-Orissa Craton, India

The Banded Hematite Jasper Formation within the Iron Ore Supergroup of the Singhbhum Craton in eastern India comprises fine alternating layers of jasper and specularite. It was deposited at 3000 Ma and deformed by a mobile episode at 2700 Ma. Hematite pigment (<1 μm) mixed with cryptocrystalline silica and specularite (> 10 μm) is chiefly responsible for red to brown rhythmic bands in the hematite jasper facies although thermomagnetic study also shows that minor amounts (1–2%) of magnetite are present. Palaeomagnetic study identifies a dual polarity remanence resident in hematite (D/I = 283/60°, α₉₅ = 12°) which predates deformation. Studies of the fabric of magnetic susceptibility and rock magnetic results suggest a diagenetic origin for this magnetisation with the hematite formed from oxidation of primary magnetite. The palaeopole (32°E, 24°N, dp/dm = 14/18°) records the earliest post-metamorphic magnetisation event in the Orissa Craton. A minimum apparent polar wander motion of the Orissa-Singhbhum craton of through 80° is identified during Late Archaean times (2900-2600 Ma).     

Litho-asthenospheric structures of northern Italy as inferred from teleseismic P-wave tomography

Regional three-dimensional inversions of teleseismic P-wave travel time residuals recorded by high-frequency regional and local seismic networks operating along the Western Alps and surrounding regions were carried out and lithosphere and upper mantle P-wave velocity models down to 300 km were obtained.

Residuals of more than 500 teleseismic events, recorded by 98 fixed and temporary seismic stations, have been inverted.

The comparison between real residuals and the ones obtained from tomographic model indicates that the method is able to solve the feature of the regional heterogeneities.

Where the resolution is good, coherent lithospheric and upper mantle structures are imaged. In the shallower layers, high- and low-velocity anomalies follow the structural behaviour of the Alpine-Apenninic chains showing the existence of very strong velocity contrasts. In the deepest layers, velocity contrast decreases however two deep-seated high-velocity structures are observed. The most extended in depth and approximately trending NE-SW has been interpreted as a wreck of the oldest subduction responsible of the Alpine orogenesis. The second one, connected to the northwestern sector of the Apenninic chain, appears to vanish at depths greater than 180 km and is probably due to still active Apenninic roots.

Cross-sections depict the spatial trend of perturbations and in particular outline the sub-vertical character of the Alpine and Apenninic anomalies. Under the Ligurian Sea, the 3-D inversion confirms the uplift of the asthenosphere in agreement with the tectonic evolution of the basin.     

Effects of temperature on strength and compressibility of sand-bentonite buffer

Dense sand-bentonite buffer (γ_d = 1.67Mg/m³) has been proposed in Canada as one of several barriers for isolating nuclear fuel waste. The buffer will be required to function under conditions of high total pressures and elevated temperatures approaching 100°C. Summary results are presented from two test programs: (1) isothermal consolidated undrained triaxial (CIU¯) tests; and (2) isothermal drained constant-p′ (CID) triaxial tests. Specimens were consolidated at effective stresses up to 9.0 MPa and temperatures up to 100°C.

The results indicate parallel hardening lines at systematically lower values of specific volume at elevated temperatures. In shear, increased temperatures produced lower values of maximum deviator stressq_f, and higher pore water pressure changesΔu_f. The net result is curved peak strength envelops in plots ofq_f versusp_f′ that are higher at elevated temperatures, even though the strengths,q_f of individual specimens are lower. The critical state strength envelope is curved inq, p′-planes.

The effect of drained heating on buffer to 100°C is not marked. Compressibilities, stiffnesses, strengths, and pore water pressure generation are all affected, but none of the changes are great.     

Water quality impacts from mining in the Black Hills,South Dakota,USA

The focus of this research was to determine if abandoned mines constitute a major environmental hazard in the Black Hills. Many abandoned gold mines in the Black Hills contribute acid and heavy metals to streams. In some areas of sulfide mineralization local impacts are severe, but in most areas the impacts are small because most ore deposits consist of small quartz veins with few sulfides. Pegmatite mines appear to have negligible effects on water due to the insoluble nature of pegmatite minerals. Uranium mines in the southern Black Hills contribute some radioactivity to surface water, but the impact is limited because of the dry climate and lack of runoff in that area.