Mafic Pegmatites Intruding Oceanic Plateau Gabbros and Ultramafic Cumulates from Bolivar, Colombia: Evidence for a 'Wet' Mantle Plume?

The fault-bounded Bolívar Ultramafic Complex (BUC) onthe eastern fringes of the Western Cordillera of Colombia wastectonically accreted onto the western coast of South Americain the late Cretaceous–early Tertiary, along with pillowbasalts of the Caribbean–Colombian Oceanic Plateau (CCOP).The complex consists of a lower sequence of ultramafic cumulates,successively overlain by layered and isotropic gabbroic rocks.The gabbros grade into, and are intruded by, mafic pegmatitesthat consist of large magnesiohornblende and plagioclase crystals.These pegmatites yield a weighted mean ⁴⁰Ar–³⁹Ar step-heatingage of 90·5 ± 0·9 Ma and thus coincidewith the timing of peak CCOP volcanism. The chemistry of theBUC is not consistent with a subduction-related origin. However,the similarity in Sr–Nd–Pb–Hf isotopes betweenthe CCOP and the BUC, in conjunction with their indistinguishableages, suggests that the BUC is an integral part of the plume-derivedCCOP. The parental magmas of the Bolívar complex wereprobably hydrous picrites that underwent 20–30% crystallization.The residual magmas from this fractionation contained     

The Influence of Geodynamic Factors on the Postsedimentary Lithogenesis of Jurassic Terrigenous Complexes of the Caucasus (Southern Dagestan)

The influence of geodynamic factors on the postsedimentary lithogenesis of terrigenous sequences during the replacement of the passive continental-margin regime to the active regime is considered with the Toarcian–Aalenian complexes of southern Dagestan as an example. It has been established that clayey rocks were lithified under conditions of subsidence lithogenesis, whereas the orogenic catagenesis of sandy rocks was related to stress initiated by the initial (amagmatic) subduction phase. The Kübler index has been used to reveal the postsedimentary zonality that is consistent with the intensity of folding and cleavage. The metagenesis zone fits the cleavage zone. The Rb–Sr and K–Ar datings of clayey rocks from the metagenesis zone yielded 180–190 Ma that can be interpreted as the timing of the maximal manifestation of postsedimentary lithogenesis.     

Oil and Gas Potential of Deep- and Ultradeep-Water Zones of Continental Margins

Oil- and gas-bearing basins of the World Ocean spreading to the continental shelf and foothill are considered. Large hydrocarbon resources, including oil pools have been discovered in the deep-water basins. The basins are confined to passive continental margins and characterized by the common mechanism of formation. Oil and gas (hereafter, petroleum) generation and accumulation are dictated by the optimum specifics of source and reservoir rocks accumulated under favorable conditions of rifts and deep-sea fans. Halokinesis played an important role in the formation of traps and migration of hydrocarbons. The global experience shows that the northern, eastern, and southern shelves of the Russian seas, as well as their continental slopes and foothills, have a big petroleum potential.     

Mudstones of the Tanqua Basin, South Africa: an analysis of lateral and stratigraphic variations within mudstones, and a comparison of mudstones within and between turbidite fans

Permian deep‐water mudstones in the Tanqua Basin, South Africa, have been studied using geochemical and spectral gamma ray techniques. The mudstones occur as thick sequences between sand‐rich submarine fans, but also occur as thinner mud‐rich units within each fan. The interfan mudstones are interpreted to have accumulated during transgression and the consequent period of relatively high sea‐level, while the submarine fans and their intrafan mudstones were deposited during regression and relatively low sea‐level. Geochemical analyses revealed systematic differences between interfan and intrafan mudstones because the two types of mudstones have slightly different source lithologies. Differences between the two types of mudstone suggest that changes in relative sea‐level played a role in controlling exposure of sediment source areas. There are geochemical signals that display systematic stratigraphic trends within both interfan and intrafan mudstones. These are best explained by gradual denudation, exposure and weathering of different lithologies within a single sediment source area. Both interfan and intrafan mudstones have uniform geochemical signals along the flow direction except for the relative amount of uranium. It is most likely that the basinward increase in uranium in the mudstones is the result of reduced clastic dilution of uranium‐bearing pelagic fallout.     

Inferring the mass fraction of floc-deposited mud: application to fine-grained turbidites

Fine sediment deposition in the ocean is complicated by the cohesive nature of muds and their tendency to flocculate. The result is disaggregated inorganic grain size (DIGS) distributions of bottom sediment that are influenced by single‐grain and floc deposition. This study outlines a parametric model that characterizes bottom sediment DIGS distributions. Modelled parameters are then used to infer depositional conditions that account for the regional variation in the grain sizes deposited by turbidity currents on the Laurentian Fan–Sohm Abyssal Plain, offshore south‐eastern Canada. Results indicate that, on the channellized Laurentian Fan, the mass fraction of floc‐deposited mud increases only slightly downslope. The small evolution in this fraction arises because sediment concentration and turbulent energy are associated in turbidity currents. On the Sohm Abyssal Plain, however, the mass fraction of floc‐deposited mud decreases, probably as a result of lower sediment concentration at this source‐distal site. Estimates of the mass fraction of mud deposited as flocs suggest that floc deposition is the dominant mode by which sediment is lost from suspension, although single‐grain deposition contributes more to the depositional flux in proximal areas where high energy breaks flocs and in distal areas where low sediment concentration limits floc formation. It is concluded that, throughout the dispersal system, changes in the fraction of flocculated mud deposited from turbidity currents reflect changes in sediment concentration and energy downslope.     

Exploring the attractions of city centre living: evidence and policy implications in British cities

The British city centre has been the focus of dynamic housing development and repopulation strategies as a key dimension of the government's urban renaissance programme. Through large scale interview surveys in the provincial city centres of Bristol and Swansea, this paper explores the positive and negative features of city centre living, and how these vary amongst a range of social and physical characteristics. The findings suggest that the practical and mundane attractions of city centre living are more important than the more widely publicised lifestyle and cultural attractions of the city centre commonly emphasised in the gentrification literature. Moreover, the research points to differences in attitudes between age groups, with younger adults placing greater value on the range of social and cultural activities in the city centre, whilst older people express high levels of satisfaction with the attractiveness of the environment. A number of policy implications emerge to encourage inclusive marketing strategies within the continued urban renaissance, particularly to challenge the negative perceptions and promote the varied attractions of city centre living to a mix of social groups.     

Gravity anomalies and associated tectonic features over the Indian Peninsular Shield and adjoining ocean basins

A combined gravity map over the Indian Peninsular Shield (IPS) and adjoining oceans brings out well the inter-relationships between the older tectonic features of the continent and the adjoining younger oceanic features. The NW–SE, NE–SW and N–S Precambrian trends of the IPS are reflected in the structural trends of the Arabian Sea and the Bay of Bengal suggesting their probable reactivation. The Simple Bouguer anomaly map shows consistent increase in gravity value from the continent to the deep ocean basins, which is attributed to isostatic compensation due to variations in the crustal thickness. A crustal density model computed along a profile across this region suggests a thick crust of 35–40 km under the continent, which reduces to 22/20–24 km under the Bay of Bengal with thick sediments of 8–10 km underlain by crustal layers of density 2720 and 2900/2840 kg/m³. Large crustal thickness and trends of the gravity anomalies may suggest a transitional crust in the Bay of Bengal up to 150–200 km from the east coast. The crustal thickness under the Laxmi ridge and east of it in the Arabian Sea is 20 and 14 km, respectively, with 5–6 km thick Tertiary and Mesozoic sediments separated by a thin layer of Deccan Trap. Crustal layers of densities 2750 and 2950 kg/m³ underlie sediments. The crustal density model in this part of the Arabian Sea (east of Laxmi ridge) and the structural trends similar to the Indian Peninsular Shield suggest a continent–ocean transitional crust (COTC). The COTC may represent down dropped and submerged parts of the Indian crust evolved at the time of break-up along the west coast of India and passage of Reunion hotspot over India during late Cretaceous. The crustal model under this part also shows an underplated lower crust and a low density upper mantle, extending over the continent across the west coast of India, which appears to be related to the Deccan volcanism. The crustal thickness under the western Arabian Sea (west of the Laxmi ridge) reduces to 8–9 km with crustal layers of densities 2650 and 2870 kg/m³ representing an oceanic crust.     

Neotectonic deformation in the transition zone between the Dead Sea Transform and the East Anatolian Fault Zone, Southern Turkey: a palaeomagnetic study of the Karasu Rift Volcanism

In southern Turkey ongoing differential impingement of Arabia into the weak Anatolian collisional collage resulting from subduction of the Neotethyan Ocean has produced one of the most complex crustal interactions along the Alpine–Himalayan Orogen. Several major transforms with disputed motions, including the northward extension of the Dead Sea Fault Zone (DSFZ), meet in this region. To evaluate neotectonic motion on the Amanos and East Hatay fault zones considered to be northward extensions of the DSFZ, the palaeomagnetism of volcanic fields in the Karasu Rift between these faults has been studied. Remanence carriers are low-Ti magnetites and all except 5 of 51 basalt lavas have normal polarity. Morphological, polarity and K–Ar evidence show that rift formation occurred largely during the Brunhes chron with volcanism concentrated at 0.66–0.35 Ma and a subsidiary episode at 0.25–0.05. Forty-four units of normal polarity yield a mean of D/I=8.8°/54.7° with inclination identical to the present-day field and declination rotated clockwise by 8.8±4.0°. Within the 15-km-wide Hassa sector of the Karasu Rift, the volcanic activity is concentrated between the Amanos and East Hatay faults, both with left lateral motions, which have rotated blocks bounded by NW–SE cross faults in a clockwise sense as the Arabian Block has moved northwestwards. An average lava age of 0.5 Ma yields a minimum cumulative slip rate on the system bounding faults of 0.46 cm/year according with the rate deduced from the Africa–Arabia Euler vector and reduced rates of slip on the southern extension of the DSFZ during Plio-Quaternary times. Estimates deduced from offsets of dated lavas flows and morphological features on the Amanos Fault Zone [Tectonophysics 344 (2002) 207] are lower (0.09–0.18 cm/year) probably because they are limited to surface fault breaks and do not embrace the seismogenic crust.Results of this study suggest that most strike slip on the DSFZ is taken up by the Amanos–East Hatay–Afrin fault array in southern Turkey. Comparable estimates of Quaternary slip rate are identified on other faults meeting at an unstable FFF junction (DSFZ, East Anatolian Fault Zone, Karatas Fault Zone). A deceleration in slip rate across the DSFZ and its northward continuation during Plio-Quaternary times correlates with reorganization of the tectonic regime during the last 1–3 Ma including tectonic escape within Anatolia, establishment of the North and East Anatolian Fault Zones bounding the Anatolian collage in mid–late Pliocene times, a contemporaneous transition from transpression to transtension and concentration of all basaltic magmatism in this region within the last 1 Ma.     

Genetic significance of fluid inclusions in the CSA Cu–Pb–Zn deposit, Cobar, Australia

CSA mine exploits a ‘Cobar-type’ Cu–Pb–Zn±Au±Ag deposit within a cleaved and metamorphosed portion of the Cobar Supergroup, central New South Wales. The deposit comprises systems of ‘lenses’ that encompass veins, disseminations and semi-massive to massive Cu–Pb–Zn ores. The systems and contained lenses truncate bedding, are approximately coplanar with regional cleavage and similarly oriented shear zones and plunge parallel to the elongation lineation. Systems have extreme vertical continuity (>1000 m), short strike length (400 m) and narrow width (100 m), exhibit vertical and lateral ore-type variation and have alteration haloes. Models of ore formation include classical hydrothermalism, structurally controlled remobilisation and polymodal concepts; syntectonic emplacement now holds sway.Fluid inclusions were examined from quartz±sulphide veins adjacent to now-extracted ore, from coexisting quartz–sulphide within ore, and from vughs in barren quartz veins. Lack of early primary inclusions precluded direct determination of fluids associated with D₂–D₃ ore and vein emplacement. Similarly, decrepitation (by near-isobaric heating) of the two oldest secondary populations precluded direct determination of fluid phases immediately following D₂–D₃ ore and vein emplacement. Post-decrepitation outflow (late D₃ to early post-D₃) is recorded by monophase CH₄ inclusions. Entrained outflow of deeply circulated meteoric fluid modified the CH₄ system; modification is recorded by H₂O+CH₄ and H₂O+(trace CH₄) secondary populations and by an H₂O+(trace CH₄) primary population. The contractional tectonics (D₂–D₃) of ore emplacement was superseded by relaxational tectonics (D_4P) that facilitated meteoric water penetration and return flow.Under D₂ prograde metamorphism, entrapment temperatures (Tt) and pressures (Pt) for pre-decrepitation secondary inclusions are estimated as Tt300–330 °C and Pt1.5–2 kbar≈Plith (the lithostatic pressure). Decrepitation accompanied peak metamorphism (T350–380 °C) in mid- to late-D₃, while in late-D₃ to early post-D₃, essentially monophase CH₄ secondary inclusions were entrapped at Tt350 °C and Pt=1.5–2 kbar≈Plith. Subsequently, abundant CH₄ and entrained meteoric water were entrapped as H₂O+CH₄ secondaries under slowly decreasing temperature (Tt330–350 °C) and constant pressure (Pt1.5–2 kbar). Finally, with increasingly dominant meteoric outflow, H₂O+(trace CH₄) populations record decreasing temperatures (Tt>300 to <350 down to 275–300 °C) at pressures of Phydrostatic<Pt (1 kbar) <Plith (1.5 kbar).The populations of inclusions provide insight into fluid types, flow regimes and P–T conditions during parts of the deposit's evolution. They indirectly support the role of basin-derived CH₄ fluids in ore formation, but provide no insight into a basement-sourced ore-forming fluid. They fully support post-ore involvement of meteoric water. The poorly constrained entrapment history is believed to span 10 Ma from 395 to 385 Ma.     

Curve-Fitting Schemes for Fragmentation Data

Fragmentation measurements in the form of sieve passing and mass fraction data were used to test the capability of three different distributions to fit the observed data over a wide range in fragment size and mass. These distributions were based on Rosin-Rammler, lognormal and simple sigmoidal (S-shaped) functions, having 2 input parameters for the single-component versions and 5 input parameters for the two-component versions. Provided convergence was achieved in the non-linear curve-fitting technique, the two-component versions always provided superior fits to the observed data. However, these versions were very sensitive to variations in the values chosen for the input parameters. In this particular regard, the two-component sigmoidal function was the most robust. The present results also show that the two-component lognormal function provided the best fit to the fragmentation data in a general sense, and the two-component Rosin-Rammler function provided the worst fit. However, there was not a significant difference between any of the three methods.