Influences of Natural and Anthropogenic Factors and Tidal Restoration on Terrestrial Arthropod Assemblages in West Coast North American Estuarine Wetlands

Compared to benthic and water-column invertebrate assemblages, considerably less is known about terrestrial arthropods inhabiting estuarine wetlands despite their importance to tidal wetland biodiversity and productivity. We also need to know more about how human modification of estuaries, including efforts to restore estuarine wetlands, affects these assemblages. To address this knowledge gap, we assembled data from multiple studies on terrestrial arthropod assemblages from 87 intertidal wetland sites in 13 estuaries along the west coast of North America. Arthropods were sampled between 1998 and 2013 with fallout traps deployed in wetlands for 1 to 3 days at a time. We describe patterns in the abundance and taxonomic composition of terrestrial arthropods and evaluate the relative ability of natural and anthropogenic factors to explain variation in abundance and composition. Arthropod abundance was highly variable. Vegetation assemblage, precipitation, and temperature best explained variation in arthropod abundance, while river discharge, latitude, and developed and agricultural land cover surrounding sampling sites were less important. Arthropod abundance rapidly achieved levels of reference wetlands after the restoration of tidal influence to leveed wetlands, regardless of surrounding land cover. However, arthropod assemblage composition was affected by the amount of developed land cover as well as restoration age. These results suggest that restoration of tidal influence to leveed wetlands can rapidly restore some components of estuarine wetland ecosystems but that recovery of other components will take longer and may depend on the extent of anthropogenic modification in the surrounding landscape.     

Magmatism at continental passive margins inferred from Ambient‐Noise Phase‐velocity in the Gulf of Aden

Non‐volcanic continental passive margins have traditionally been considered to be tectonically and magmatically inactive once continental breakup has occurred and seafloor spreading has commenced. We use ambient‐noise tomography to constrain Rayleigh‐wave phase‐velocity maps beneath the eastern Gulf of Aden (eastern Yemen and southern Oman). In the crust, we image low velocities beneath the Jiza‐Qamar (Yemen) and Ashawq‐Salalah (Oman) basins, likely caused by the presence of partial melt associated with magmatic plumbing systems beneath the rifted margin. Our results provide strong evidence that magma intrusion persists after breakup, modifying the composition and thermal structure of the continental margin. The coincidence between zones of crustal intrusion and steep gradients in lithospheric thinning, as well as with transform faults, suggests that magmatism post‐breakup may be driven by small‐scale convection and enhanced by edge‐driven flow at the juxtaposition of lithosphere of varying thickness and thermal age.     

Geological and hydrogeological assessment of the Brito Formation: Municipio de Tola,Nicaragua

Hydrogeology Journal - There are sparse hydrogeological data and insufficient hydrogeological knowledge in many areas of the world reliant on groundwater. Nicaragua’s Pacific coast is one...     

Volcanic influences in a storm‐ and tide‐dominated shallow marine depositional system: The late permian broughton formation,southern Sydney Basin,Kiama, NSW

Shallow marine sediments of the Broughton Formation are dominated by immature volcanic debris of intermediate to basic composition, generated in an adjacent subaerial environment by volcanism responsible for the nine shoshonite units intercalated within sediments of the Kiama region. Sediment was supplied to the offshore environment via periodic storm‐generated, expanded high density turbidity currents. Initial deposition, represented by the Westley Park Sandstone Member, was below storm wave base, during which time the depositional surface was subjected to post‐depositional tractional reworking by northerly directed, tidally influenced bottom currents. The resulting positive‐relief sand bodies on the seafloor contain tractional sedimentary structures (the ‘tractional facies association'). Areas of the substrate between these sand bodies retained their turbidite bedding structure (the ‘rhythmically bedded facies association') but were extensively bioturbated by a diverse deposit‐feeding biomass.

Upon emplacement of the lowest of the nine shoshonite units as a tri‐composite, locally intrusive lava flow, the depositional surface was elevated, transgressing storm wave base. The body of the shoshonite flow also shielded the substrate from the northerly directed tractional currents, allowing the development and preservation of the hummocky cross‐stratified sandstone facies in the Kiama Sandstone Member. Following burial of the shoshonite flow by continued deposition, this local shielding effect was overcome and tractional currents again reworked the entire depositional surface.     

Verification of Toronto temperature and precipitation forecasts for the period 1960–1979

Abstract

The accuracy of temperature and precipitation forecasts for Toronto was studied for the 20‐year period 1960–1979. Since any archive of official forecasts extends for only a small part of this period, it was necessary to retrieve the forecasts from newspaper records. The possible errors involved in such a data source were examined through a comparison of newspaper reported observations and the official record. On only a few occasions were significant differences observed.

For temperature forecasts, the record indicates a significant loss of skill over the 20‐year periodin the prediction of maximum temperature for the first day. This was observed not only for the Bloor Street observing station for which the entire 20‐year record was analysed, but also for observing stations at Toronto Island, Downsview and Malton. The loss of skill over the years is greatest in winter when temperature is consistently predicted too low at all stations.

For the entire period under study, precipitation forecasts consisted only of words and no quantitative information (such as probability of precipitation forecasts) was issued. Word choice is intended to carry information on the duration and expected spatial coverage of precipitation, but substantial inconsistencies between word choice and subsequent precipitation occurrence were found. Consequently, the verification procedure for these forecasts was very simple and ignored any differences implied in word choice. With this technique precipitation forecasts were shown to have improved over the 20‐year period.     

A coupled sediment routing and lateral migration model for gravel‐bed rivers

We describe additions made to a multi‐size sediment routing model enabling it to simulate width adjustment simultaneously alongside bed aggradation/incision and fining/coarsening. The model is intended for use in single thread gravel‐bed rivers over annual to decadal timescales and for reach lengths of 1–10 km. It uses a split‐channel approach with separate calculations of flow and sediment transport in the left and right sides of the channel. Bank erosion is treated as a function of excess shear stress with bank accretion occurring when shear stress falls below a second, low, threshold. A curvature function redistributes shear stress to either side of the channel. We illustrate the model through applications to a 5·6‐km reach of the upper River Wharfe in northern England. The sediment routing component with default parameter values gives excellent agreement with field data on downstream fining and down‐reach reduction in bedload flux, and the width‐adjustment components with approximate calibration to match maximum observed rates of bank shifting give plausible patterns of local change. The approach may be useful for exploring interactions between sediment delivery, river management and channel change in upland settings. Copyright © 2011 John Wiley & Sons, Ltd.     

Auriacusite, Fe3+Cu2+AsO4O, the first M 3+ member of the olivenite group, from the Black Pine mine, Montana, USA

Auriacusite, ideally Fe³⁺Cu²⁺AsO₄O, is a new arsenate mineral (IMA2009–037) and the Fe³⁺ analogue of olivenite, from the Black Pine mine, 14.5 km NW of Philipsburg, Granite Co., Montana, USA. It occurs lining quartz vughs and coating quartz crystals and is associated with segnitite, brochantite, malachite, tetrahedrite and pyrite. Auriacusite forms fibrous crystals up to about 5?µm in width and up to about 100?µm in length, which are intergrown to form fibrous mats. Individual crystals are a brownish golden yellow, whilst the fibrous mats are ochreous yellow. The crystals have a silky lustre and a brownish yellow streak. Mohs hardness is about 3 (estimated). The fracture is irregular and the tenacity is brittle. Auriacusite crystals are biaxial (+), with α?=?1.830(5), β?=?1.865(5) and γ?=?1.910(5), measured using white light, and with 2V _meas.?=?83(3)º and 2V _calc. = 84.6º. Orientation: X?=?a, Y?=?c, Z?=?b. Crystals are nonpleochroic or too weakly so to be observed. The empirical formula (based on 5 O atoms) is (Fe _1.33 ³⁺ Cu_0.85Zn_0.03)_Σ2.21(As_0.51Sb_0.27Si_0.04?S_0.02Te_0.01)_Σ0.85O₅. Auriacusite is orthorhombic, space group Pnnm, a?=?8.6235(7), b?=?8.2757(7), c?=?5.9501(5) Å, V?=?424.63(6) ų, Z?=?4. The five strongest lines in the powder X-ray diffraction pattern are [d _obs in Å / (I) / hkl]: 4.884 / (100) / 101, 001; 2.991 / (92) / 220; 2.476 / (85) / 311; 2.416 / (83) / 022; 2.669 / (74) / 221. The crystal structure was solved from single-crystal X-ray diffraction data utilising synchrotron radiation and refined to R ₁?=?0.1010 on the basis of 951 unique reflections with F _o?>?4σF. Auriacusite is identified as a member of the olivenite group with Fe³⁺ replacing Zn²⁺ or Cu²⁺ in trigonal bipyramidal coordination. Evidence suggests that auriacusite is an intermediate member between olivenite and an as yet undescribed Fe³⁺Fe³⁺-dominant member. The name is derived from the Latin auri (golden yellow) and acus (needle), in reference to its colour and crystal morphology.     

Quantifying the spatial distribution of sediment transport in an experimental gully system using the morphological method

Whilst time-series of sediment transport in gullies in both laboratory experimental and field settings can be determined through instrumentation, quantifying the spatial distribution of transport rates remains challenging. The morphological method, which was proposed for estimating bed-material transport in both one- and two-dimensions in rivers, provides an alternative. Here, we developed this method for gully systems. A laboratory catchment was used to simulate gully erosion. High-resolution topographical data were acquired by close-range digital photogrammetry. Morphological changes were determined using high-resolution topographic data and an associated level of detection. Based on measured morphological changes, one-dimensional (1D) and two-dimensional (2D) sediment transport rates were calculated via cross-section by cross-section routing (1D) and cell by cell routing (2D). The 1D application provided a general trend of longitudinal variation of sediment transport for the whole gully system, increased gradually from zones of headward extension to a zone downstream where erosion and deposition were in balance, and sediment transport rates less variable in space. For the 2D application, hydrological and blended hydrological-hydraulic routing solutions were compared. We found that the level of negative transport was insensitive to whether or not a blended hydrological-hydraulic routing was used and that results from applying the hydrological routing throughout were not significantly degraded. We also found that consideration should be given to spatial and temporal resolution of the topographic data. The 2D application provided spatial patterns of sediment transport that vary with gully evolution. The main gully remained a high transport corridor but branch transport became more important through time. The framework we report provides an additional tool for both experimental and field quantification of the spatial patterns of sediment transport in gullies; and quantification of how these patterns change under different forcing factors.     

An exploratory spatial data analysis of low birth weight prevalence in Georgia

Low birth weight (LBW), defined as a live birth weighing less than 2500 g, is a significant public health problem in the United States, but the complex nature of the etiology of this problem is not fully understood. Moreover, significant disparities in LBW prevalence are well documented among certain populations, particularly in minority and underserved communities. The identification of spatial patterns of LBW prevalence is a critical first step in a more complete understanding of the epidemiology of this public health challenge and these techniques are instrumental in designing valid observational and analytical studies to more fully study the problem. This paper examines the spatial patterns of LBW prevalence, as well as the presence of spatial clusters in the State of Georgia at both the county and census tract levels. Unadjusted and empirical Bayes smoothed LBW rates were mapped to visualize the spatial variation of LBW rates, and the Moran’s I statistic and the Local Indicator of Spatial Association (LISA) statistic were computed to assess the degree of spatial dependence in the LBW rates. Results revealed marked geographical variation in LBW prevalence in Georgia in 2000. In addition, these data validate the significant disparity (two-fold difference) between white and black racial subgroups as documented in the literature. Trends associated with positive and negative spatial autocorrelations illustrated variation with respect to race. Limitations of data and methods, as well as plans for utility of the results of this study for further investigation were discussed.