Lu–Hf geochronology and trace element distribution in garnet: Implications for uplift and exhumation of ultra-high pressure granulites in the Sudetes, SW Poland

Combining Lu–Hf garnet geochronology with in situ trace element analyses in garnet allowed us to gain new insight into the metamorphic evolution of UHP–UHT rocks in the Stary Gierałtów region, in the Polish Sudetes. Prograde garnet growth recorded by Rayleigh-type heavy REE (HREE) zoning in the felsic granulites indicates that the obtained 386.6 ± 4.9 Ma Lu–Hf age represents the time of garnet crystallization on a prograde UHP metamorphic path. The surrounding rocks were metamorphosed at the same time as indicated by 381.2 ± 6.7 Ma Sm–Nd garnet age obtained for the mid-crustal metapelites. The second metamorphic episode, which affected most of the lower crust in the Orlica–Śnieżnik Massif (OSM) occurred at ca. 340 Ma as determined by U–Pb zircon and Sm–Nd garnet dating of granulites in this and previous studies is interpreted as a high temperature event, which took place on a retrograde path.

Trace element distribution in garnets from the layered granulites showed significant differences in distribution of medium and HREE in garnets from mafic and felsic protoliths over the course of the metamorphic evolution. This had strong impact on the isotopic dating results and led to “decoupling” of the Sm–Nd and Lu–Hf clocks, which recorded timing of the two different metamorphic episodes separated by as much as 40 Ma. Moreover, the preservation of the HREE growth zonation profile in garnets from the felsic granulites whose minimum metamorphic temperature was established at 900 °C implies that the Lu–Hf system under relatively dry conditions does not undergo significant diffusional re-equilibration even at such extreme temperatures and therefore it sill provides the age of prograde garnet growth. Under hydrous conditions, at least some resetting will take place, as documented by the partially relaxed HREE zonation profile in the amphibolitised mafic granulite, which yielded a 10 Ma younger age. The HREE distribution study appeared to be a particularly valuable and essential tool, which allowed us to distinguish garnet growth from post-growth complexities and hence, provide improved age interpretation. Medium REE, on the other hand, did not show any obvious correlation with the isotopic signature of garnet.

Two distinct metamorphic episodes recorded in the Stary Gierałtów region show that buoyancy-driven uplift of UHP rocks can be arrested at the base of a continental crust if not supported by any additional force. In our case study, the UHP rocks would have never reached the surface if their uplift had not been resumed after a long pause under a different tectonic regime. The multistage, discontinuous uplift revealed by the UHP rocks of the OSM provides a new scenario for the exhumation of continental crust from mantle depths distinct from the fast-track exhumation histories recognized in UHP terranes elsewhere.     

Testing a statistical curve‐fitting procedure for quantifying sediment populations within multi‐modal particle‐size distributions

This paper describes a series of tests designed to evaluate the capacity of a personal computer (PC) based statistical curve‐fitting program called MIX to quantify composite populations within multi‐modal particle‐size distributions. Three natural soil samples were analysed by a Coulter Multisizer, and their particle‐size distributions analysed using MIX software to identify the modes, standard deviations and proportions of their composite populations. The particle‐size distributions of the three natural soil samples were then numerically combined in equal proportions using a spreadsheet program to create synthetic particle‐size distributions of known populations. MIX was then tested on the synthetic particle‐size distributions to see if the modes and proportions it identified were similar to those modes and proportions known to characterize the synthetic particle‐size distributions. The main outcome is that MIX can very accurately describe the modal particle size and proportions of the major composite populations within a particle‐size distribution. However MIX has difficulty in identifying small populations (those contributing <10 per cent of a total particle‐size distribution), particularly when they are located in the central sections of particle‐size distributions, overlain by larger populations, or when positioned in the fine tails of distributions. Despite these minor shortcomings, MIX is a valuable tool for the examination and interpretation of particle‐size data. Copyright © 2005 John Wiley & Sons, Ltd.     

An inexpensive instrument for measuring benthic current velocity and direction at sea

An instrument which measures the velocity and direction of benthic water currents at depths of up to 80 m is described. Characteristics of this meter include: (i) readings are not affected by water flow during sinking or retrieval; (ii) it is portable; (iii) it operates unattended; (iv) it is inexpensive; and (v) it requires only simple maintenance. A timing circuit which operates two time periods in succession is used to activate and de-activate a revolution counter and a fluidfilled compass which are mounted on a special frame and vane system. In the field, the instrument accurately measured average current velocities of up to 6 m s⁻¹. Data are presented which illustrate the usefulness of this instrument in describing the velocity and direction of benthic currents along the east coast of Australia and demonstrate a positive correlation between benthic current velocity and catch rates of the commercially-exploited spanner crab Ranina ranina.     

Geologic and geochemical study of the Picacho gold mine, California: gold in a low-angle normal fault environment

The Picacho gold deposit, located in southeasternmost California, is a low-grade gold deposit in a nearly flat-lying denudational fault of regional extent and probable Oligocene age. The deposit is hosted by intensely fractured and faulted Mesozoic leucogranite and by chloritic augen gneiss and schist, and is overlain unconformably and in fault contact by unmineralized late Oligocene Quechan volcanic rocks. The deposit is structurally characterized by normal and normal-oblique faults of low to high dip at shallow depths in the mine, merging downward with a synchronous, low-dipping ore-stage extensional fault system (the Chocolate Mountains/Gatuna Fault) of probable Oligocene age in deeper portions of the deposit. The fault system was infiltrated during much of its active life by hot, dilute, highly exchanged meteoric water having temperatures of 170°–210° C, salinity <2 wt% NaCl equivalent and calculated δ¹⁸O_fluid between −2.6‰ and 5.2‰. This main-stage fluid precipitated quartz, pyrite, and specular hematite, accompanied by silicification and sericitization. Auriferous ore-stage pyrite was precipitated late in the fault evolution probably by mixing of reducing ore fluid with relatively oxidized main-stage fluid during regional Oligocene extension on the Chocolate Mountains/Gatuna Fault. The Picacho deposit is characterized by a gold–arsenic–antimony geochemical signature consistent with bisulfide complexing of gold in reducing fluid, in contrast with typical denudation fault-hosted base-metal-rich deposits associated with high-salinity fluids elsewhere in the southwestern United States. The deposit is overprinted by Miocene normal faults having a wide range of dips. These postore faults are associated with red earthy hematite precipitation, pyrite oxidation, and supergene enrichment of gold. Editorial handling: L. Meinert     

Selenium and mercury concentrations in harbor seals (Phoca vitulina) from central California: Health implications in an urbanized estuary

We measured total selenium and total mercury concentrations ([TSe] and [THg]) in hair (n = 138) and blood (n = 73) of harbor seals (Phoca vitulina) from California to assess variation by geography and sex, and inferred feeding relationships based on carbon, nitrogen, and sulfur stable isotopes. Harbor seals from Hg-contaminated sites had significantly greater [THg], and lesser [TSe] and TSe:THg molar ratios than seals from a relatively uncontaminated site. Males had significantly greater [THg] than females at all locations. Sulfur stable isotope values explained approximately 25% of the variability in [THg], indicating increased Hg exposure for seals with a greater use of estuarine prey species. Decreased [TSe] in harbor seals from Hg-contaminated regions may indicate a relative Se deficiency to mitigate the toxic effects of Hg. Further investigation into the Se status and the potential negative impact of Hg on harbor seals from Hg-contaminated sites is warranted.     

Sources of magnetic susceptibility in a slate

Magnetic susceptibility and its anisotropy in the Borrowdale Volcanic slates at Kentmere in the English Lake District are attributed largely to preferred orientation of a paramagnetic chlorite of diabantite-ripidolite composition. In units of 10⁻⁶ cgs/g, the principal susceptibilities for the slates are 9.61; 9.42; 8.69 and for the chlorite grains the minimum anisotropy is represented by principal susceptibilities of 11.57; 11.22 and 9.15. Because the magnetic susceptibility is carried by a tightly packed, matrix-forming mineral that has recrystallised during the deformation it is not possible to imagine simple grain rotation as being responsible for the anisotropy of susceptibility.     

Microbial activity and chemical weathering in the Middendorf aquifer,South Carolina

We use reactive transport modeling to better understand the kinetics of chemical weathering in the Cretaceous Middendorf aquifer of South Carolina, USA, and the relationship of this process to subsurface microbial activity. We constructed a model accounting for the kinetics of mineral dissolution and precipitation, ion exchange, and the CO₂ and bicarbonate produced by iron reducing and sulfate reducing bacteria in the aquifer. We then fit the model to observed trends in the chemical composition of groundwater along the aquifer by adjusting the rate constants for the kinetic reactions considered. The modeling portrays weathering in the Middendorf as a slow process by which groundwater gradually reacts toward equilibrium with minerals in the aquifer. The rate constants predicted are 6 to 7 orders of magnitude smaller than measured in laboratory experiments and 3 to 4 orders of magnitude less than those inferred from weathering rates in soils. The rate constants are smaller even than expected by projecting observed trends with the duration of weathering to the geologic age of the Middendorf. Weathering is driven largely by biological activity: about half the acid consumed is CO₂ derived from the recharge area, and about half is supplied by iron reducing bacteria in the aquifer; only about 1% of the acid is of atmospheric origin, from CO₂ dissolved in rainwater.     

Root‐zone moisture replenishment in a native vegetated catchment under Mediterranean climate

The root‐zone moisture replenishment mechanisms are key unknowns required to understand soil hydrological processes and water sources used by plants. Temporal patterns of root‐zone moisture replenishment reflect wetting events that contribute to plant growth and survival and to catchment water yield. In this study, stable oxygen and hydrogen isotopes of twigs and throughfall were continuously monitored to characterize the seasonal variations of the root‐zone moisture replenishment in a native vegetated catchment under Mediterranean climate in South Australia. The two studied hillslopes (the north‐facing slope [NFS] and the south‐facing slope [SFS]) had different environmental conditions with opposite aspects. The twig and throughfall samples were collected every ~20 days over 1 year on both hillslopes. The root‐zone moisture replenishment, defined as percentage of newly replenished root‐zone moisture as a complement to antecedent moisture for plant use, calculated by an isotope balance model, was about zero (±25% for the NFS and ± 15% for the SFS) at the end of the wet season (October), increased to almost 100% (±26% for the NFS and ± 29% for the SFS) after the dry season (April and May), then decreased close to zero (±24% for the NFS and ± 28% for the SFS) in the middle of the following wet season (August). This seasonal pattern of root‐zone moisture replenishment suggests that the very first rainfall events of the wet season were significant for soil moisture replenishment and supported the plants over wet and subsequent dry seasons, and that NFS completed replenishment over a longer time than SFS in the wet season and depleted the root zone moisture quicker in the dry season. The stable oxygen isotope composition of the intraevent samples and twigs further confirms that rain water in the late wet season contributed little to root‐zone moisture. This study highlights the significant role of the very first rain events in the early wet season for ecosystem and provides insights to understanding ecohydrological separation, catchment water yield, and vegetation response to climate changes.     

Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

On the application of the mode-acceleration method to structural engineering problems

Mode-superposition has been extensively used in computing the dynamic response of complex structures. Two versions of mode-superposition, namely the mode-displacement method and the mode-acceleration method, have been employed. The present paper summarizes the results of a systematic study comparing the accuracy of the mode-displacement and mode-acceleration methods when applied to structures with various levels of damping or various excitation frequencies. The paper also discusses several details concerning the implementation of the mode-acceleration method.