Experimental investigation on the seismic performance of masonry buildings using shaking table testing

Masonry buildings worldwide exhibited severe damage and collapse in recent strong earthquake events. It is known that their brittle behavior, which is mainly due to the combination of low tensile strength, large mass and insufficient connection between structural elements, is the main limitation for their structural implementation in residential buildings. A new construction system for masonry buildings using concrete blocks units and trussed reinforcement is presented here and its seismic behavior is validated through shaking table tests. Dynamic tests of two geometrically identical two-story reduced scale (1:2) models have been carried out, considering artificial accelerograms compatible with the elastic response spectrum defined by the Eurocode 8. The first model was reinforced with the new proposed system while the second model was built with unreinforced masonry. The experimental analysis encompasses local and global parameters such as cracking patterns, failure mechanisms, and in-plane and out-of-plane behavior in terms of displacements and lateral drifts from where the global dynamic behavior of the two buildings is analyzed comparatively. Finally, behavior factors for the design recommendations in case of unreinforced masonry are also evaluated.     

Application of open tools and datasets to probabilistic modeling of road traffic disruptions due to earthquake damage

The disruption of a transportation network can have a high social and economic impact on the welfare of a society, as it can significantly affect the daily routines of a community. Although many studies have focused on the estimation of physical risk in the components that compose these networks, only a limited number have analyzed their interconnections and impact in the traffic flow. The present study analyzes how earthquake damage can disrupt the road network in an urban environment, and how this will influence the ability of the population to travel. Traffic due to daily commutes is modeled for different layouts of the network, corresponding to possible disruptions caused by earthquake damage. The duration and length of each trip were calculated both for the undamaged network conditions and for the disrupted network. The increase in the median duration and length of each trip allows estimating the economic loss for each event due to drivers' delay. By combining the probability of a specific road being blocked with its number of users, the average number of affected vehicles was estimated, and the most critical segments identified. The methodology was applied to a case study concerning the road network of the area around the Italian city of Messina in Sicily. The results were calculated for both a repetition of the well-known historical event of 1908 and a set of simulated earthquakes consistent with the national probabilistic seismic hazard model of Italy.     

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.     

Highly nonlinear wind waves in Currituck Sound: dense breather turbulence in random ocean waves

Ocean Dynamics - We analyze surface wave data taken in Currituck Sound, North Carolina, during a storm on 4 February 2002. Our focus is on the application of nonlinear Fourier analysis (NLFA)...     

Sorption and desorption behavior of residual antidepressants and caffeine in freshwater sediment and sewage sludge

The use of antidepressants is widespread in modern times. Thus, they present a potential risk for ecosystems due to occurrence in domestic sewage containing unaltered metabolites and structures, even after the treatment plants have processed the sewage. The current research investigated the sorption and desorption of antidepressants(citalopram, venlafaxine, fluoxetine, sertraline, and amitriptyline) and caffeine from freshwater sediment and sewage sludge. The samples of freshwater sediment were ...     

Sediment contamination in floodplains and alluvial terraces as an historical record of gold exploitation in the Carmo River basin,Southeast Quadrilátero Ferrífero,Minas Gerais,Brazil

This paper describes the geochemistry of sediment samples placed in floodplains and alluvial terraces downstream from gold mines in the Carmo River basin, Quadrilátero Ferrífero, Minas Gerais, Brazil. The geochemistry signature Na₂O, K₂O, SiO₂, CaO, MgO, Al₂O₃, Fe₂O₃, TiO₂, P₂O₅, Mn, As, Cu, Zn, Ba, Ni, Cr, S, Co were analyzed in different facies from stratigraphic profiles. As, Cu, Zn, and Mn anomalies are mainly associated with the clayed facies deposited in floodplains and oxbow lakes, and with coarse‐sediment facies deposited in the channel. The facies were accumulated by the gold exploitation activity in the region. The contamination of As, Cu, and Zn was controlled by minerals such as iron oxides and hydroxides (hematite, magnetite, and mainly goethite), manganese oxides, and sulfide‐rich minerals. The As‐bearing sediments of the region characterize one of the most As contaminated area of Brazil. Their main source is associated with gold exploration in the last three centuries.     

Ideal width of transects for monitoring source-related categories of plastics on beaches

Although there is a consensus on the necessity of monitoring solid wastes pollution on beaches, the methods applied vary widely. Therefore, creating, testing and recommending a method that not only allows comparisons of places and periods, but also the detection of source signals, will be important to reach the objectives of the source-prevention principle. This will also allow the optimisation of time, resources, and processing of samples and data. A classification of the items found into specific categories was made according to their most probable source/use (fisheries, food packaging, hazardous, sewage/personal hygiene, beach user, general home). This study tested different widths of sampling transects to be used in the detection of plastics contamination on beaches, until all the categories were significantly represented. Each transect had its total width (50m) sub-divided into eight intervals of 0-2.5m; 2.5-5m; 5-10m; 10-15m; 15-20m; 20-30m; 30-40m; and 40-50m. The accumulated number of categories in the 50m (up to 2.5m; up to 5m and so on) was used to determine the minimal width necessary to qualitatively characterize the area regarding plastics contamination. The diversity of the categories was directly related to the area of the sampling transect. These results indicate that a significant increase in the number of categories in the first intervals tend to stabilize from 15-20m onwards.     

Effects of the number of stations and time resolution on derivation

For at least 30 years now it has been well known that the Dst index can be modelled using the solar wind as input. Since then, many attempts have been made to improve the predictability of Dst using different approaches. These attempts are useful, for instance, to understand which features of the solar wind–magnetosphere interactions are most important in producing magnetospheric activity and how the Dst index would improve the space weather forecast. The Dst index is by far the most reliable and simple indication that a magnetic storm is in progress. In this work, the effect of using more than four magnetic stations and shorter time intervals than the hourly averages used in Sugiura's procedures is evaluated. The discussion is based on the results presented by Burton in 1975 and Feldstein in 1984 considering 4 or 12 magnetic stations and time averages of 2.5 min for a magnetic disturbed period that occurred from February 7–28, 1967, including two geomagnetic storms. The analysis has shown that the global representation of a magnetic storm by the standard Dst (Sugiura) is well preserved either using 4, 6, 12 magnetic stations or using 1 h, 2.5 min 1 min averages. A brief review of the current understanding of Dst has been included to support the discussions. The analysis performed has shown that a more refined Dst index (time and number of stations>4) would be useful to investigate the intrinsic processes and the different current systems involved in the ring current development during magnetic storms; the standard Dst, as it is conceived, is quite adequate to monitor geomagnetic storms and identify their overall features; concerning the magnetic stations normally considered, the inclusion of higher magnetic latitude stations (>35) may underestimate the observed Dst.