The subsurface megascopic characteristics of basalt and basement rocks from Koyna-Warna area of Maharashtra,India

Vertical deep boreholes of depth up to 1522.50m have been drilled in Koyna-Warna area of Maharashtra State within the Deccan Volcanic Province to study the most outstanding example of Reservoir Triggered Seismicity (RTS). The drilling of 9 bore-holes in the area has provided a window to earth scientists to peep into geological details available below Deccan Trap.The 932.50m thick pile of Deccan basalt, consisting of 30 flows at Rasati, near Koyna, which has been physically seen through cores, present a marvellous geological repository for observations. The megascopic characteristics of various flows and variation in composition have been presented in this paper. The microscopic and geochemical characteristics have been kept out of this communication, as the relevant studies are not completed to draw any conclusion. This study records the presence of granite wash (≈1m thick) over basement and below basalt representing Late Archaean to Cretaceous period hiatus. The basement rocks, presumably of Late Archaean age have been described mega-scopically. A fair picture of sub-surface pre-Deccan topography is shown with the help of borehole data, which confirm the nearly flat topography of pre-Deccan surface especially in this part of the area occupied by 30 flows of Deccan basalt. Correlation of 30 flows with the established stratigraphy has also been attempted for subsurface existence of Ambenali (Upper) and Poladpur Formations of Wai Subgroup in Koyna-Warna area.     

Parametric study of factors affecting fluid flow through a fracture

Understanding the flow behavior through fractures is critically important in a wide variety of applications. In many situations, the fluid flow can be highly irregular and non-linear in nature. Numerical simulation can be employed to simulate such conditions which are difficult to replicate in laboratory experiments. Therefore, a parametric study has been conducted on the fluid flow through micro-fracture over a large range of inlet pressure, fluid density, fluid viscosity, temperature, joint roughness coefficient (JRC), and fracture using finite element analysis. Irregular fracture profiles were created using Barton’s joint roughness coefficient. The Navier-Stokes (NS) equation was used to simulate the flow of water in those micro-fractures. The result showed that the fracture, fluid, and ambient conditions have a wide and varied effect on the fluid flow behavior. The interrelationship between these parameters was also studied. The model simulation provided result in the form of velocity and pressure drop profile, which can be used to determine the behavior of flow under different condition. The volumetric flow was calculated for each condition and has been plotted against the corresponding parameter to study the interrelationship.     

Fractal analysis of logs to characterize the hydrocarbon and non-hydrocarbon zones of Bhogpara oil field,Northeast India

Identification with accuracy of prospective and dry zone from well log data is of prime importance in reservoir or hydrocarbon studies. This issue has greater stake, where in return many conventional methods have been established. The purpose of this study is to recognize the hydrocarbon and non-hydrocarbon bearing portion within a reservoir by using a non-conventional technique. Application of rescaled range (R/S) analysis and wavelet-based fractal analysis (WBFA) on the wire-line log data to obtain the pre-defined hydrocarbon (HC) and non-hydrocarbon (NHC) zones by their fractal nature is demonstrated in this paper. Among these two techniques, the WBFA tool has provided more prolific results. Applicability of the proposed approach is tested with the help of the most commonly used well log data like self-potential, gamma ray, and porosity log responses. These are used in the industry to distinguish several HC and NHC zones of all wells in the study region belonging to the Upper Assam Basin, India. The results are found to be of lower fractal dimension in this study for a particular log response having HC-bearing zones, which are mainly situated in a variety of sandstone lithology. On the other hand, NHC-bearing zones correspond to lithology with higher shale content categorized with higher fractal dimension. Hence, the WBFA technique can overcome the chance of misinterpretation, which is quite possible in the case of conventional reservoir characterization.     

The rapid growth and decay of severe cyclone JAL (2010) over the Bay of Bengal

This study investigates the life cycle of Bay of Bengal cyclone JAL, characterized by a rapid fluctuation in its intensity during 60-h interval. The cyclone JAL underwent a period of rapid intensification during 24-h from 0000 UTC 05 November to 0000 UTC 06 November 2010. It was quasi-static during subsequent 24 h followed by a 12-h period of unusually rapid decay. During the rapid cyclogenesis phase, the system intensified (by 25 kt) from deep depression (DD) to severe cyclonic storm (SCS) and weakened (by 30 kt) from SCS to DD during the 12-h period of rapid cyclolysis. European Centre for Medium Range Weather Forecasts (ECMWF) model analysis field is used to analyze the Q vectors, K index and potential vorticity (PV) to diagnose the life cycle of this unusual cyclone. The analysis reveals that the 500–700 hPa column-averaged Q-vector convergence above the surface cyclone had strengthened and very high values of the K index produced a burst of heavy precipitation during the development stage of the cyclone. The associated latent heat release produced a substantial diabatic positive PV anomaly in the lower and middle troposphere that caused rapid cyclogenesis. The rapid cyclolysis is coincident with the weakening of the upper and lower PV anomalies and the westward shearing of the upper PV from the cyclone centre. Thus, the very latent heat release that assisted the rapid development of the cyclone also played an important role in its subsequent rapid decay. ECMWF model forecast for track and intensity is also verified.     

Probing for suitable climatology to estimate the predictability of monsoon onset over Kerala (MOK), India

Inter-annual variability in the onset of monsoon over Kerala (MOK), India, is investigated using daily temperature; mean sea level pressure; winds at 850, 500 and 200 hPa pressure levels; outgoing longwave radiation (OLR); sea surface temperature (SST) and vertically integrated moisture content anomaly with 32 years (1981–2013) observation. The MOK is classified as early, delayed, or normal by considering the mean monsoon onset date over Kerala to be the 1st of June with a standard deviation of 8 days. The objective of the study is to identify the synoptic setup during MOK and comparison with climatology to estimate the predictability of the onset type (early, normal, or delayed) with 5, 10, and 15 days lead time. The study reveals that an enhanced convection observed over the Bay of Bengal during early MOK is found to shift over the Arabian Sea during delayed MOK. An intense high-pressure zone observed over the western south Indian Ocean during early MOK shifts to the east during delayed MOK. Higher tropospheric temperature (TT) over the western Equatorial Ocean during early MOK and lower TT over the Indian subcontinent intensify the land–ocean thermal contrast that leads to early MOK. The sea surface temperature (SST) over the Arabian Sea is observed to be warmer during delayed than early MOK. During early MOK, the source of 850 hPa southwesterly wind shifts to the west equatorial zone while a COL region has been found during delayed MOK at that level. The study further reveals that the wind speed anomaly at the 200-hPa pressure level coincides inversely with the anomaly of tropospheric temperature.     

Influence of transient storage on stream nutrient uptake based on substrata manipulation

Quantification of the transient storage zone (A_s) has become critical in stream biogeochemical studies addressed to examine factors controlling nutrient uptake. It is expected that higher A_s may enhance the interaction between nutrients and biota and thus, increase nutrient uptake. However, results from the literature are controversial. We hypothesized that besides of the size of A_s, the intrinsic physical and biological characteristics of stream structures that generate A_s are also relevant for nutrient uptake. We performed 24 additions of phosphate, ammonium, and chloride in four reaches of a man-made channel where we introduced three types of naturally colonized substrata packs (mud, sand and cobbles) to modify A_s. We estimated ammonium and phosphate uptake coefficients in both the main channel and A_s using a solute transport model (OTIS-P) and compared the results among reaches with different substrata types. The introduction of substrata packs decreased water velocity and increased A_s similarly among treatments. Nutrient uptake coefficients in the main channel were similar among reaches with different type substrata packs; however, nutrient uptake coefficients measured in A_s differed among them as well as the ratio between ammonium and phosphorus uptake coefficients in A_s, which were 1.6 in reaches with mud packs and 0.02 in reaches with sand or cobble packs. Results obtained in this study suggest that the contribution of A_s in nutrient uptake not only depends on the size of A_s but on the type of materials used to increase A_s, and thus, have biogeochemical implications on restoration projects aimed to modify channel morphology.     

Fissures and fractures in the Koyna seismogenic zone,western India

Mn-rich ilmenites (up to 7 % MnO) have been identified in dykes cutting the Malanjkhand porphyry copper mining area in Madhya Pradesh. The dykes are hydrothermally altered and are of tholeiitic affinities. Lamprophyres have been reported from nearby areas. The presence of Mn-rich Ilmenites in the Malanjkhand copper mine dykes and the occurrence of lamprophyres and the pervasive potassium metasomatism in the area strongly suggests a possibility of finding diamondiferous rocks in the area. Such high-Mn bearing ilmenites are associated with diamondiferous deposits in other parts of the world, e.g. Juina kimberlites, Brazil. Mn-bearing ilmenite is considered as an indicator mineral for kimberlite/diamond occurrences. The presence of kimberlite pipes in Raipur district and the association of Mn-rich ilmenite with kimberlites is a fortuitous coincidence for venture-some mining companies. A probable explanation for the origin of manganese layers in the context of ‘rift’ tectonic environment is offered. Also a possible link between the dykes, quartz veins in the Malanjkhand granitic rocks and the copper mineralization is proposed.     

New REE and Trace Element Data on Two Kimberlitic Reference Materials by ICP-MS

Data on thirty-four minor and trace elements including all rare earth elements (REE) are reported for two kimberlitic international reference materials (SARM-39, MINTEK, RSA and MY-4, IGEM, Russia) by inductively coupled plasma-mass spectrometry (ICP-MS), some of them for the first time. Four digestion techniques (open acid, closed vessel acid, microwave and lithium metaborate fusion digestion) were used for the decomposition of samples for analysis by ICP-MS. Three other reference materials (USGS BHVO-1, CRPG BR-1 and ANRT UB-N) were analysed simultaneously using the same analytical methodology to assess the precision and accuracy of the determinations. The data obtained in this study compare well with working values wherever such values are available for comparison. Though open acid digestion was found to be very rapid, effective and convenient for the determination of several trace elements in kimberlitic samples, recoveries for heavy rare earth elements (HREE) were lower than the respective recoveries obtained by the other decomposition techniques used. The precision obtained was better than ± 6% RSD in the majority of cases with comparable accuracy. Chondrite-normalised plots of each RM for all the digestion techniques were smooth. The new data reported on the two kimberlitic reference materials make these samples useful for future geochemical studies of kimberlitic rocks.