中国南方海相含油气保存单元的层次划分与综合评价

以最近十年中国南方的海相新区油气勘探评价成果为依托 ,以油气成藏和整体封闭保存体系评价为核心 ,在渝东—湘鄂西、中下扬子和滇黔桂三大区域划分出 9个有利区块 5 1个含油气保存单元 ,并将其归纳为四个层次。综合评价认为 ,方西和石柱保存单元具有较好的整体封存体系 ,属持续性含油气保存单元 ,为首选勘探目标 ;江汉盆地南部、句容—海安区块、南鄱阳坳陷、楚雄盆地东北部具备或基本具备整体封存条件 ,属于沉积重建型含油气保存单元 ,通过精细勘探可望获得商业性油气流 ;楚雄盆地西北部、南盘江坳陷、十万大山盆地和渝东—湘鄂西地区利川复向斜由于晚期强烈构造改造而仅存在部分封存体系 ,需要攻关探索 ;思茅、渝东—湘鄂西地区的花果坪和桑植—石门地区已失去整体封闭保存条件 ,仅局部存在封存体系 ,地质条件高度复杂 ,勘探风险甚高。     

塔中地区油气运聚特征

塔中地区主要受塔中Ⅰ号、Ⅱ号及Ⅲ号三条大断层控制 ,形成巨型复式背斜 ,隆起高部位地层遭受了强烈的风化剥蚀。背斜之上 ,断裂和局部构造发育。可划分出两个主要成藏期 :第Ⅰ成藏期为寒武系—下奥陶统烃源岩成熟生烃运移期 ,生排烃高峰为志留纪 ;第Ⅱ成藏期为中—上奥陶统烃源岩在燕山期—喜马拉雅期成熟生烃运聚。第Ⅰ成藏期形成的油藏有两个特征 :在塔中Ⅰ号断裂带、北部斜坡带油气注入奥陶系及志留系圈闭中 ,形成原生油气藏 ;构造高部位 (如中央断垒带 )的油气藏在后期构造运动中遭受破坏。第Ⅱ成藏期形成的油藏可分为两类 :对早期油藏的再次充注 ;聚集形成新油藏。塔中地区的油气运移通道主要有断裂和不整合面 ,油气的分布也主要受断裂和不整合面所控制。塔中Ⅰ号构造带和北部斜坡带是较为有利的勘探区带     

岩层离距图法研究沉积岩断裂发育史——以松辽盆地敖古拉断裂为例

利用断裂活动过程中留下的各种地质标记研究断裂发育史是比较困难的 ,已有的研究方法主要可归纳出七种 ,都存在局限性。岩层离距图法是以地震剖面为基础 ,将穿过断裂的各剖面上的标志层投影到沿断裂走向的铅垂面上 ,得到多组标志层的垂向断距数据 ,然后用下部各标志层的断距减去最上部标志层的断距 ,并作多轮次计算 ,直到最后的断距差近似为零或仅剩一个非零标志层。每一轮次计算代表一个活动期次 ,如果出现负值 ,则表示有构造反转。对松辽盆地敖古拉断裂作了实例计算 ,结果为该断裂发育经历了三个正断活动期和一个逆断活动期 ,与盆地区域性活动有些差别。岩层离距图法比起其他已有方法 ,可靠程度大大提高     

Geological controls on rock mass classification of coal from Huntly East Mine, New Zealand

Rock Mass Rating (RMR) measurements from 65 sites within Huntly East underground coal mine are presented. All measurements are in coal, for which the dominant discontinuities are vertical cleat. Basic RMR values using two discontinuity spacings are presented: overall RMR based on the average spacing of all individual discontinuities; and cleat zone RMR based on the average spacing between zones of cleat. Cleat orientations are highly variable, but on average approximately parallel horizontal stress axes (face cleat follows maximum horizontal stress axis, butt cleat follows minimum horizontal stress axis).Contours of RMR variations throughout the mine are used to compare rock mass conditions with geological structure. It is apparent that: (1) RMR is least within downthrown fault blocks, and particularly immediately on the downthrown sides of faults, and greatest in upthrown fault blocks; and (2) RMR contours parallel horizontal stress axes within fault-bounded blocks, and bend to parallel faults at block boundaries. From similar contours for parameters contributing to RMR, the Rock Quality Designation (RQD), groundwater rating, and discontinuity condition rating create most of the observed variations in RMR. RQD is determined from the measured discontinuity frequency and hence is a measure of the degree of fracturing of the rock mass. This is interpreted as influencing the groundwater and condition parameters directly by allowing greater water ingress. Discontinuity frequency is greatest (least spacing) in the immediate vicinity of faults, and in downthrown fault blocks, generating low RMR values. Within fault blocks RQD varies little, so RMR contours align with cleat orientations.As RMR contours, faults, stress field and cleat orientation are clearly interrelated, there is unequivocally a connection between RMR and structural geology; this allows some predictive capacity in terms of ground conditions. If geological features can be accurately defined through either drilling programs or seismic surveys, then ground conditions may be predicted before panels are driven.     

Geochemical Information Indicating the Water Recharge to Lakes and Immovable Megadunes in the Badain Jaran Desert

1 Introduction The Badain Jaran Desert, located in western Inner Mongolia, China, has a unique landscape containing 144 lakes (72 of which are still watery) with a total water area of about 23 km2, and the world’s highest stationary sand dunes with a height between 200 m and 500 m. Much attention has been paid to the water recharge of the desert in the past decade. Investigations on the resources of water system there have been performed continuously since the early 1990s, which lead to th…     

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ⁵⁶Fe and δ³⁰Si with increasing silica content as well as a systematic increase in δ⁵⁶Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ⁵⁶Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ⁵⁶Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ⁵⁶Fe = +0.05 ± 0.02 ‰; δ³⁰Si = ?0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.     

Biogenic volatile compound emissions from a temperate forest,China: model simulation

Emissions of biogenic volatile organic compounds (BVOC) were measured using a relaxed eddy accumulation (REA) technique on an above-canopy tower in a temperate forest (Changbai Mountain, Jilin province, China) during the 2010 and 2011 summer seasons. Solar global radiation and photosynthetically active radiation (PAR) were also measured. Based on PAR energy dynamic balance, an empirical BVOC emission and PAR transfer model was developed that includes the processes of BVOC emissions and PAR transfer above the canopy level, including PAR absorption and consumption, and scattering by gases, liquids, and particles (GLPs). Simulated emissions of isoprene and monoterpenes were in agreement with observations. The averages of the relative estimator biases for the flux were 39.3 % for isoprene, and 27.1 % for monoterpenes in the 2010 and 2011 growing seasons, with NMSE (normalized mean square error) values of 0.133 and 0.101, respectively. The observed and simulated mean diurnal variations of isoprene and monoterpenes in the 2010 and 2011 growing seasons were evaluated for the validation of the empirical model. Under observed atmospheric conditions, the sensitivity analysis showed that emissions of isoprene and monoterpenes were more sensitive to changes in PAR than to water vapor content or to the magnitude of the scattering factor. The emissions of isoprene and monoterpenes in the 2010 and 2011 growing seasons (from June to September) were estimated using this empirical model along with hourly observational data, with mean hourly emissions of 1.71 and 1.55 mg m^?2 h^?1 for isoprene, and 0.48 and 0.47 mg m^?2 h^?1 for monoterpenes in 2010 and 2011, respectively. As formaldehyde (HCHO) is considered as the main oxidation product of isoprene and monoterpenes, it is necessary to investigate the link between HCHO and BVOC emissions. GOME-2 HCHO vertical column densities (VCDs) can be used to estimate BVOC emission fluxes in the Changbai Mountain temperate forest.     

Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.