Stormwater control impacts on runoff volume and peak flow: A meta-analysis of watershed modelling studies

Decades of research has concluded that the percent of impervious surface cover in a watershed is strongly linked to negative impacts on urban stream health. Recently, there has been a push by municipalities to offset these effects by installing structural stormwater control measures (SCMs), which are landscape features designed to retain and reduce runoff to mitigate the effects of urbanisation on event hydrology. The goal of this study is to build generalisable relationships between the level of SCM implementation in urban watersheds and resulting changes to hydrology. A literature review of 185 peer-reviewed studies of watershed-scale SCM implementation across the globe was used to identify 52 modelling studies suitable for a meta-analysis to build statistical relationships between SCM implementation and hydrologic change. Hydrologic change is quantified as the percent reduction in storm event runoff volume and peak flow between a watershed with SCMs relative to a (near) identical control watershed without SCMs. Results show that for each additional 1% of SCM-mitigated impervious area in a watershed, there is an additional 0.43% reduction in runoff and a 0.60% reduction in peak flow. Values of SCM implementation required to produce a change in water quantity metrics were identified at varying levels of probability. For example, there is a 90% probability (high confidence) of at least a 1% reduction in peak flow with mitigation of 33% of impervious surfaces. However, as the reduction target increases or mitigated impervious surface decreases, the probability of reaching the reduction target also decreases. These relationships can be used by managers to plan SCM implementation at the watershed scale.     

Permo-Triassic tectonic evolution and metallogenesis of the Rockhampton—Maryborough area, Queensland — A photogeological investigation

Structural analysis of remotely sensed data provides a method of assessing the tectonic significance of regional metallogenic lineaments in the New England Orogen of southeastern Queensland. Photogeological analysis of Landsat imagery and small-scale aerial photography reveals a pattern of WNW—NNW-oriented structures, which were apparently generated in response to Mesozoic crustal extension and reactivated during Early Tertiary block faulting. These structures tend to overprint arcuate late Palaeozoic to early Mesozoic trends and batholith belts, and exert a control over Middle to Late Triassic rifting and epizonal plutonism. The distribution of epigenetic base and precious metal deposits in the Rockhampton—Maryborough area is locally but not regionally related to identifiable structural lineaments.     

Calcareous algae and cyanobacteria

Algae is an informal term used to describe a broad group of simple organisms from the plant kingdom. The organisms included within this grouping are aquatic photosynthetic biota with an extensive range of life habits and forms. These organisms range from micron-sized unicellular forms to giant seaweeds and kelps, which can grow to several metres long. Both benthic and planktonic modes of life are known and display a wide variety of life cycles.     

Temporal evolution and compositional signatures of two supervolcanic systems recorded in zircons from Mangakino volcanic centre,New Zealand

Mangakino, the oldest rhyolitic caldera centre delineated in the Taupo Volcanic Zone of New Zealand, generated two very large (super-sized) ignimbrite eruptions, the 1.21 ± 0.04 Ma >500 km³ Ongatiti and ~1.0 Ma ~1,200 km³ Kidnappers events, the latter of which was followed after a short period of erosion by the ~200 km³ Rocky Hill eruption. We present U/Pb ages and trace-element analyses on zircons from pumice clasts from these three eruptions by Secondary Ion Mass Spectrometry (SIMS) using SHRIMP-RG instruments to illustrate the evolution of the respective magmatic systems. U–Pb age spectra from the Ongatiti imply growth of the magmatic system over ~250 kyr, with a peak of crystallisation around 1.32 Ma, ~100 kyr prior to eruption. The zircons are inferred to have then remained stable in a mush with little crystallisation and/or dissolution before later rejuvenation of the system at the lead-in to eruption. The paired Kidnappers and Rocky Hill eruptions have U–Pb zircon ages and geochemical signatures that suggest they were products of a common system grown over ~200 kyr. The Kidnappers and Rocky Hill samples show similar weakly bimodal age spectra, with peaks at 1.1 and 1.0 Ma, suggesting that an inherited antecrystic population was augmented by crystals grown at ages within uncertainty of the eruption age. In the Kidnappers, this younger age peak is dominantly seen in needle-shaped low U grains with aspect ratios of up to 18. In all three deposits, zircon cores show larger ranges and higher absolute concentrations of trace elements than zircon rims, consistent with zircon crystallisation from evolving melts undergoing crystal fractionation involving plagioclase and amphibole. Abundances and ratios of many trace elements frequently show variations between different sectors within single grains, even where there is no visible sector zoning in cathodoluminescence (CL) imaging. Substitution mechanisms, as reflected in the molar (Sc + Y + REE³⁺)/P ratio, differ in the same growth zone between the sides (along a-axis and b-axis: values approaching 1.0) and tips (c-axis: values between 1.5 and 5.0) of single crystals. These observations have implications for the use of zircons for tracking magmatic processes, particularly in techniques where CL zonation within crystals is not assessed and small analytical spot sizes cannot be achieved. These observations also limit applicability of the widely used Ti-in-zircon thermometer. The age spectra for the Ongatiti and Kidnappers/Rocky Hill samples indicate that both magmatic systems were newly built in the time-breaks after respective previous large eruptions from Mangakino. Trace element variations defining three-component mixing suggest that zircons, sourced from multiple melts, contributed to the population in each system.     

Distorted Froude‐scaled flume analysis of large woody debris

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.     

Gold dispersion in a tropical rainforest weathering profile at Dondo Mobi, Gabon

At Dondo Mobi in the gold district of Eteke, south Gabon, gold mineralization was studied in a tropical forest setting. The mineralization occurs in quartz veins within amphibolites of an Archaean gneiss-amphibolite series. Gold distribution patterns were studied in the different horizons of the weathering profile and in the different grain-size fractions of the materials sampled from three pits sunk in the weathered zone: upslope (pit P1), directly overlying (pit P2) and downslope (pit P3) of the mineralization.The weathering profile consists of an upper, thick, loose sandy argillaceous horizon (H1), an irregular nodular horizon with laterite nodules or blocks (H2) and a saprolite layer (H3) up to 70 m thick. In each pit, the specific geochemical signature of the bedrock is recognized in the three horizons of the weathering profile. Some groups of elements, e.g., Cr-Ni or Ba-V-P₂O₃, characterize amphibolite or black shale, respectively. Signal attenuations in the upper horizon can be explained by a homogenization effect. That can be related to a mushroom supergene dispersion, simultaneously inducing vertical decrease and lateral enrichment in element contents. Gold also mushrooms extensively in the different horizons of the weathering profile. The dispersion pattern is somewhat anisotropic, a strong enlargement being observed in the upper (H1) and intermediate nodular (H2) horizons alike. However, the evolution of Au distribution is not the same for all grain-size fractions: (a) in the finest fraction, Au is regularly distributed in the weathering profile at the anomalous top and tends to preserve an equivalent level of concentration laterally; (b) in the coarsest fraction, the maximum Au content is found in the upper horizon just above the mineralized structure; it is rapidly decreases laterally, in the surface halo.The Au geochemical dispersion halo consists mainly of fine-grained gold developed from rather coarse-grained mineralization. Its characteristics suggest that Au dispersion was produced as a result of Au dissolution together with collapse of the weathering profile causing gold migration over short distances.The minimal volumetric reduction of saprolite in the upper horizon can be estimated to be in the range of 60%, on the basis of the content of the different grain-size fractions and the density variations in the various horizons.In exploration, geochemical techniques, even using wide sample spacing, are proving quite adequate to prospect for Au in tropical rainforest weathering environment. Indeed, significant, well-contrasted dispersion haloes facilitate detection of rather confined mineralization.     

Inversion for seismic anisotropy using genetic algorithms1

A general inversion scheme based on a genetic algorithm is developed to invert seismic observations for anisotropic parameters. The technique is applied to the inversion of shear-wave observations from two azimuthal VSP data sets from the Conoco test site in Oklahoma. Horizontal polarizations and time-delays are inverted for hexagonal and orthorhombic symmetries. The model solutions are consistent with previous studies using trial and error matching of full waveform synthetics. The shear-wave splitting observations suggest the presence of a shear-wave line singularity and are consistent with a dipping fracture system which is known to exist at the test site. Application of the inversion scheme prior to full waveform modelling demonstrates that a considerable saving in time is possible whilst retaining the same degree of accuracy.     

Pollen representation,source area,and basin size: Toward a unified theory of pollen analysis

The concepts of pollen source area and of production and dispersal biases in pollen representation are quantified by means of a simple theoretical model. Source areas and relative pollen representation are shown to depend on basin size according to functions that describe the amount of pollen remaining airborne at increasing distances from single pollen sources. The form of these functions is determined by physical processes. Standard formulas for elevated sources do not apply, but the integrated form of Sutton's equation for particle dispersal from a ground-level source gives useful approximations applicable to pollen transport over a forest canopy. Simulations using this equation yielded source areas that increased realistically with basin size, showed substantial differences between source areas for pollen grains with different deposition velocities, and predicted that lighter pollen grains should become better represented with increasing basin size. All of these predictions are qualitatively consistent with present knowledge of the characteristics of pollen assemblages in different depositional environments. The model further allows parameters that can be estimated by statistical calibration methods to be predicted from underlying physical quantities. This extension suggests procedures for testing the theory with quantitative data on surface pollen and forest composition. Preliminary results showed reasonable agreement between estimated and predicted values of dispersal indices for the most abundant taxa in pollen spectra from the northern midwestern United States.