Artificial halo orbits for low-thrust propulsion spacecraft

We consider periodic halo orbits about artificial equilibrium points (AEP) near to the Lagrange points L ₁ and L ₂ in the circular restricted three body problem, where the third body is a low-thrust propulsion spacecraft in the Sun–Earth system. Although such halo orbits about artificial equilibrium points can be generated using a solar sail, there are points inside L ₁ and beyond L ₂ where a solar sail cannot be placed, so low-thrust, such as solar electric propulsion, is the only option to generate artificial halo orbits around points inaccessible to a solar sail. Analytical and numerical halo orbits for such low-thrust propulsion systems are obtained by using the Lindstedt Poincaré and differential corrector method respectively. Both the period and minimum amplitude of halo orbits about artificial equilibrium points inside L ₁ decreases with an increase in low-thrust acceleration. The halo orbits about artificial equilibrium points beyond L ₂ in contrast show an increase in period with an increase in low-thrust acceleration. However, the minimum amplitude first increases and then decreases after the thrust acceleration exceeds 0.415 mm/s². Using a continuation method, we also find stable artificial halo orbits which can be sustained for long integration times and require a reasonably small low-thrust acceleration 0.0593 mm/s².     

Dark matter accretion wakes of high-redshift black holes

Anisotropic emission of gravitational waves during the merger of black holes induces a recoil velocity on the centre of mass of the binary and the final merger product can then be ejected from its host galaxy. We consider ejected black holes which stay on bound orbits around their host haloes. A recoiled black hole which moves on an almost radial orbit outside the virial radius of its central galaxy, in the cold dark matter background, reaches its apapsis in a finite time. Due to small dark matter velocity dispersion at high redshifts and also the small black hole velocity near the apapsis passage a high-density wake forms around these black hole. Gamma-ray emission can result from the enhancement of dark matter annihilation in these wakes. The diffuse high-energy gamma-ray background from the ensemble of such black holes in the Hubble volume is also evaluated.     

The effect of sideband ratio on line intensity for Herschel/HIFI

The Heterodyne Instrument for the Far Infrared (HIFI) on board the Herschel Space Observatory is composed of a set of fourteen double sideband mixers. We discuss the general problem of the sideband ratio (SBR) determination and the impact of an imbalanced sideband ratio on the line calibration in double sideband heterodyne receivers. The HIFI SBR is determined from a combination of data taken during pre-launch gas cell tests and in-flight. The results and some of the calibration artefacts discovered in the gas cell test data are presented here along with some examples of how these effects appear in science data taken in orbit.     

High Resolution Radio Observations of Luminous IR Galaxies

High resolution radio observations provide a unique tool for investigation ofultraluminous infrared galaxies, due to the combination of high angularresolution and source transparency available at centimeter wavelengths. Thetypical angular size of the IR emitting region in the most luminous systems isof order 0.1 arcsec, while dust absorption appears to obscure this region fromdirect view at wavelengths shorter than 100 microns. Radio observationswith VLBI and MERLIN are revealing compact radio structures indicative of bothstarburst and AGN activity in these systems. Additional observations arerequired to clarify relationships between radio structures and the energygeneration mechanisms, and to realize the full potential of radio interferometryfor ULIRG studies.     

A high-velocity ionized outflow and XUV photosphere in the narrow emission line quasar PG1211+143

We report on the analysis of a ∼60-ks XMM–Newton observation of the bright, narrow emission line quasar PG1211+143. Absorption lines are seen in both European Photon Imaging Camera and Reflection Grating Spectrometer spectra corresponding to H- and He-like ions of Fe, S, Mg, Ne, O, N and C. The observed line energies indicate an ionized outflow velocity of ∼24 000 km s⁻¹. The highest energy lines require a column density of   N _H∼ 5 × 10²³ cm⁻²  , at an ionization parameter of  log ξ∼ 3.4  . If the origin of this high-velocity outflow lies in matter being driven from the inner disc, then the flow is likely to be optically thick within a radius of ∼130 Schwarzschild radii, providing a natural explanation for the big blue bump (and strong soft X-ray) emission in PG1211+143.     

Exposure dating and reinterpretation of coarse debris accumulations (‘rock glaciers’) in the Cairngorm Mountains,Scotland

Relict rock glaciers have considerable potential for contributing to palaeoclimatic reconstruction, but this potential is often undermined by lack of dating control and problems of interpretation. Here we reinvestigate and date four proposed ‘rock glaciers’ in the Cairngorm Mountains and show that the morphology of only one of these appears consistent with that of a true rock glacier produced by creep of underlying ice or ice‐rich sediment. All four features comprise rockslide or rock avalanche runout debris, and the possibility that all four represent unmodified runout accumulations cannot be discounted. Surface exposure dating of the four debris accumulations using cosmogenic ¹⁰Be produced uncertainty‐weighted mean ages of 15.4 ± 0.8 ka, 16.2 ± 1.0 ka, 12.1 ± 0.6 ka and 12.7 ± 0.8 ka. All four ages imply emplacement under cold stadial conditions, two prior to the Windermere Interstade of ca. 14.5–12.9 cal. ka BP and two during the Loch Lomond Stade of ca. 12.9–11.5 cal. ka BP. The above ages indicate that paraglacial rock‐slope failure on granite rockwalls occurred within a few millennia after deglaciation. The mean exposure ages obtained for runout debris at two sites – Strath Nethy (16.2 ± 1.0 ka) and Lairig Ghru (15.4 ± 0.8 ka) – are consistent with basal radiocarbon ages from Loch Etteridge, 22 km to the southwest (mean = 15.6 ± 0.3 cal. ka BP) and imply widespread deglaciation of the Cairngorms and adjacent valleys before 15 ka and possibly 16 ka. Copyright © 2008 John Wiley & Sons, Ltd.     

Development of ST:REAM: a reach‐based stream power balance approach for predicting alluvial river channel adjustment

River channel sediment dynamics are important in integrated catchment management because changes in channel morphology resulting from sediment transfer have important implications for many river functions. However, application of existing approaches that account for catchment‐scale sediment dynamics has been limited, largely due to the difficulty in obtaining data necessary to support them. It is within this context that this study develops a new, reach‐based, stream power balance approach for predicting river channel adjustment. The new approach, named ST:REAM (sediment transport: reach equilibrium assessment method), is based upon calculations of unit bed area stream power (ω) derived from remotely sensed slope, width and discharge datasets. ST:REAM applies a zonation algorithm to values of ω that are spaced every 50 m along the catchment network in order to divide the branches of the network up into relatively homogenous reaches. ST:REAM then compares each reach's ω value with the ω of its upstream neighbour in order to predict whether or not the reach is likely to be either erosion dominated or deposition dominated. The paper describes the application of ST:REAM to the River Taff in South Wales, UK. This test study demonstrated that ST:REAM can be rapidly applied using remotely sensed data that are available across many river catchments and that ST:REAM correctly predicted the status of 87.5% of sites within the Taff catchment that field observations had defined as being either erosion or deposition dominated. However, there are currently a number of factors that limit the usefulness of ST:REAM, including inconsistent performance and the need for additional, resource intensive, data to be collected to both calibrate the model and aid interpretation of its results. Copyright © 2014 John Wiley & Sons, Ltd.     

Tar ball frequency data and analytical results from a long-term beach monitoring program

Following the spill of fuel oils from the New Carissa in February 1999, approximately 300 km of beaches on the Pacific coast of North America were surveyed. A long-term observation program focused on the documentation of stranded tar balls in the vicinity of the spill site. Systematic beach surveys which were conducted over the period March 1999 to April 2001 and semi-logarithmic scale, time-series plots proved the most useful format for identifying trends. Beach monitoring continued through to August 2001. by which time 212 tar balls had been analyzed by GC/MS for their chemical characteristics. The samples of tar balls collected between February 1999 and August 2001 were qualitatively compared with New Carissa source oils (NCSO) and 101 (48%) were not consistent with NSCO. The presence of tar balls that are not related to an incident can confound attempts to define cleanup or endpoint criteria and to assess possible injury to natural resources.     

A comparative study of the modelling of cement hydration and cement-rock laboratory experiments

The use of cement and concrete as fracture grouting or as tunnel seals in a geological disposal facility for radioactive wastes creates potential issues concerning chemical reactivity. From a long-term safety perspective, it is desirable to be able model these interactions and changes quantitatively. The ‘Long-term Cement Studies’ (LCS) project was formulated with an emphasis on in situ field experiments with more realistic boundary conditions and longer time scales compared with former experiments. As part of the project programme, a modelling inter-comparison has been conducted, involving the modelling of two experiments describing cement hydration on one hand and cement-rock reaction on the other, with teams representing the NDA (UK), Posiva (Finland), and JAEA (Japan).This modelling exercise showed that the dominant reaction pathways in the two experiments are fairly well understood and are consistent between the different modelling teams, although significant differences existed amongst the precise parameterisation (e.g. reactive surface areas, dependences of rate upon pH, types of secondary minerals), and in some instances, processes (e.g. partition of alkali elements between solids and liquid during cement hydration; kinetic models of cement hydration). It was not conclusive if certain processes such as surface complexation (preferred by some modellers, but not by others) played a role in the cement-rock experiment or not. These processes appear to be more relevant at early times in the experiment and the evolution at longer timescales was not affected. The observed permeability profile with time could not be matched. The fact that no secondary minerals could be observed and that the precipitated mass calculated during the simulations is minor might suggest that the permeability reduction does not have a chemical origin, although a small amount of precipitates at pore throats could have a large impact on permeability.The modelling exercises showed that there is an interest in keeping the numerical models as simple as possible and trying to obtain a reasonable fit with a minimum of processes, minerals and parameters. However, up-scaling processes and model parameterisation to the timescales appropriate to repository safety assessment are of considerable concern. Future modelling exercises of this type should focus on a suitable natural or industrial analogue that might aid assessing mineral-fluid reactions at these longer timescales.     

Pollen representation,source area,and basin size: Toward a unified theory of pollen analysis

The concepts of pollen source area and of production and dispersal biases in pollen representation are quantified by means of a simple theoretical model. Source areas and relative pollen representation are shown to depend on basin size according to functions that describe the amount of pollen remaining airborne at increasing distances from single pollen sources. The form of these functions is determined by physical processes. Standard formulas for elevated sources do not apply, but the integrated form of Sutton's equation for particle dispersal from a ground-level source gives useful approximations applicable to pollen transport over a forest canopy. Simulations using this equation yielded source areas that increased realistically with basin size, showed substantial differences between source areas for pollen grains with different deposition velocities, and predicted that lighter pollen grains should become better represented with increasing basin size. All of these predictions are qualitatively consistent with present knowledge of the characteristics of pollen assemblages in different depositional environments. The model further allows parameters that can be estimated by statistical calibration methods to be predicted from underlying physical quantities. This extension suggests procedures for testing the theory with quantitative data on surface pollen and forest composition. Preliminary results showed reasonable agreement between estimated and predicted values of dispersal indices for the most abundant taxa in pollen spectra from the northern midwestern United States.