Abundance, distribution and patch formation of zooplankton

The goal of studies described here was to determine the responses of zooplankton taxa to phytoplankton patches which develop in and near intrusions of cold, nutrient-rich Gulf Stream water. To achieve this goal we determined the horizontal and vertical distributions of abundant mesozooplankton taxa on the south-eastern continental shelf of the USA between 29°30′ and 31°N. The study period was from June 23 to August 16, 1981. Highest concentrations of zooplankton usually occurred in and near patches of phytoplankton. Increased phytoplankton appeared to trigger the formation of patches of the calanoid copepod Temora turbinata and the cyclopoid copepods Oithona spp. and Oncaea spp. The patches of zooplankton had greater alongshore than cross-shelf dimensions. T. turbinata responded rapidly to increased concentrations of phytoplankton by reproducing and aggregating in and above intruded waters. Oithonidae which were often, but not always, abundant in phytoplankton patches eventually attained high concentrations over most of the middle and part of the inner shelf. Their concentration and that of Oncaeidae increased steadily. Oncaeidae were not abundant in recently upwelled waters, as was T. turbinata but reached high concentrations in older intrusions when the abundance of T. turbinata remained level or decreased slowly. Both cyclopoid taxa are thought to reproduce slowly (egg sacs) compared to T. turbinata. Another taxon, the doliolids, became abundant far more rapidly in intruded waters (by asexual reproduction) than did the other three taxa. Doliolids were the most opportunistic intrusion zooplankton form. They do not regularly occur in low abundance on the shelf, as do the three copepod taxa, but develop in pulses in regions where T. turbinata and Oncaea are not abundant. Of the four taxa studied the abundance of doliolids increased and decreased most rapidly, whereas Oithona and Oncaea increased slowly and did not decrease during the study period. T. turbinata and Oncaea were most abundant at 60% of all stations in the intruding water. Doliolids and Oithona on the other hand, were mostly in the thermocline and intrusion. Whereas phytoplankton patches, which developed in intrusions, were physically induced (PAFFENHÖFER and LEE, 1988), patches of zooplankton were biologically induced.     

An alternative approach to the structural motion analysis of wedge-beam offshore structures supporting a load

For convenience of dynamic analysis, some offshore structures such as fixed-type platforms are often modeled as the wedge beams supporting tip lumped masses. It is well-known that, due to the effect of the surrounding water, the natural frequencies of a beam in air (or dry beam) are different from those of the same beam immersed in water (or wet beam). However, if the natural frequencies and the associated mode shapes of a dry beam are calculated by taking account of the “added mass” for the immersed beam, then the last natural frequencies and mode shapes will be equal to the corresponding ones of the wet beam. Based on the last concept, the closed form solutions for natural frequencies and the associated mode shapes of the dry beam were determined first, then the partial differential equation of motion for the wet beam was transformed into a matrix equation by using the expansion theorem and the foregoing closed form solutions of free vibration responses for the dry beam. Solving the last matrix equation will give the required natural frequencies and the associated mode shapes of the wet beam. The formulation of this paper is available for the fully or partially immersed double tapered beams with either circular, square or rectangular cross-sections. The taper ratio for width and that for depth may be equal or unequal. The numerical results of this paper were compared with the existing results or the finite-element-method results and good agreement was achieved.     

Upstream dams and downstream clams: growth rates of bivalve mollusks unveil impact of river management on estuarine ecosystems (Colorado River Delta, Mexico)

We studied how the extensive diversion of Colorado River water, induced by dams and agricultural activities of the last 70 years, affected the growth rates of two abundant bivalve mollusk species (Chione cortezi and Chione fluctifraga) in the northern Gulf of California. Shells alive on the delta today (‘Post-dam’ shells) grow 5.8–27.9% faster than shells alive prior to the construction of dams (‘Pre-dam’ shells). This increase in annual shell production is linked to the currently sharply reduced freshwater influx to the Colorado River estuary. Before the upstream river management, lower salinity retarded growth rates in these bivalves. Intra-annual growth rates were 50% lower during spring and early summer, when river flow was at its maximum. Growth rates in Chione today are largely controlled by temperature and nutrients; prior to the construction of dams and the diversion of the Colorado River flow, seasonal changes in salinity played an important role in regulating calcification rates.Our study employs sclerochronological (growth increment analysis) and geochemical techniques to assess the impact of reduced freshwater influx on bivalve growth rates in the Colorado River estuary. A combination of both techniques provides an excellent tool to evaluate the impact of river management in areas where no pre-impact studies were made.     

Response behaviour of triangular tension leg platforms under impact loading

Excellent station keeping characteristics and relative insensitivity with increasing water depth make triangular tension leg platforms (TLPs) a proven concept in deep water oil exploration. TLPs are often subjected to less probable forces which arise due to collision of ships, icebergs or any other huge sea creature. Dynamic analysis of two triangular TLP models at water depths 1200 and 527.8 m is performed under regular waves along with impulse load acting at an angle of 45 degrees at the TLP column. Hydrodynamic forces on these TLPs are evaluated using modified Morison equation, based on water particle kinematics arrived at using Stokes’ fifth order wave theory. Based on numerical studies conducted, it is seen that impulse loading acting on corner column of TLP significantly affect its response while that acting on pontoons dose not affect TLPs behaviour.     

Stress Sharing Behavior and Its Mechanism during Consolidation Process in Composite Ground Improved by Sand Compaction Piles with Low Replacement Area Ratio

In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay.     

Occurrence of Nummulitic coralline limestone from offshore Palar Basin,Bay of Bengal,India

Abstract

Palar basin is located between Pennar and Cauvery sedimentary basins of East coast of India in Bay of Bengal, northeast Indian Ocean. Sea floor drill (Wire-line Autonomous Coring System – WACS) with operational capability of up to 3000?m water depth was developed to collect long cores from deep sea floor for geotechnical and ocean resource assessment studies. During the drilling operation it encountered Nummulitic coralline limestone of Lower Eocene age at 18 meters below the seafloor (mbsf) at 850?m water depth indicating carbonated platform presence for the first time at the study region. Bathymetry contour from Naval Hydrography Chart and General Bathymetric Chart of the Oceans (GEBCO) has revealed the presence of shallow mounds from 50 to 200?m depth closure contour near the sampling site at 850?m water depth which might be a submerged carbonated structure. Since, Nummulites are shallow water dwelling fauna (<20?m depth) but its occurrence at 18 mbsf in 850?m water depth is recorded because of the advancement in technology tool for long core sampling by means of sea floor drill.     

Geopotential topography of deep levels in the Pacific Ocean

After examination of the baroclinic structure below 3000 db, recent data were used to map the geopotential topography at 1000, 1500, and 2000 db (referred to 3000 db) in the Pacific Ocean. In the high-latitude regions and in the western boundary currents, considerable relief is present at 1000 and 1500 db, and the Circumpolar Current is still well-developed at 2000 db. The geostrophic circulation inferred is very similar to the surface circulation in these areas. Neglect of the structure below 1000 db results in appreciable errors in estimates of the transport of these currents; direction of near-surface flow is properly shown, however, and computed speeds are not greatly in error. In the equatorial Pacific and central North Pacific, little relief is present, and the trends are generally unlike the surface flow.     

A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.     

Coulometric total carbon dioxide analysis for marine studies: maximizing the performance of an automated gas extraction system and coulometric detector

A global survey of the distribution of dissolved CO₂ taking advantage of sampling opportunities provided by the World Ocean Circulation Experiment: World Hydrographic Program (WOCE-WHP) is being carried out through 1995. Goals include the measurement of oceanic inorganic carbon transport and the development of a data base from which future fossil-fuel CO₂ build-up can be monitored. The analytical method selected for total carbon dioxide (C_T) is gas extraction of acidified seawater with coulometric titration of the acid formed by the resultant carbon dioxide and monoethanolamine. To combine high accuracy and precision (± 1.5 μmol/kg for C_T ≥ 2000 μmol/kg) with a high rate of analysis, we have modified an automated single-parameter system. Following prototype development between 1987 and 1990, an instrument emerged with the acronym Somma standing for single-operator multiparameter metabolic analyzer. Improved functional and operating procedures have integrated electronic calibration, CO₂ gas calibration, and sample analysis with automated pressure, temperature, and conductivity (salinity) sensing into a single convenient transportable package.