Development of large‐scale seismites in Upper Cretaceous fluvial sandstones in a fault‐proximal setting

Large‐scale soft‐sediment deformation structures occur within fluvial sandstone bodies of the Upper Cretaceous Wahweap Formation in the Kaiparowits basin, southern Utah, USA. These structures represent an exceptional example of metre‐scale fault‐proximal, seismogenic load structures in nearly homogenous sandstones. The load structures consist of two types: large‐scale load casts and wedge‐shaped load structures. Large‐scale load casts penetrate up to 4·5 m into the underlying sandstone bed. Wedge‐shaped load structures include metre‐scale, parallel, sub‐vertical features and decimetre‐scale features along the periphery of the large‐scale load casts or other wedge‐shaped load structures. Wedge‐shaped load structures contain well‐developed, medial cataclastic shear deformation bands. All load structures contain pervasive well‐defined millimetre‐thick to centimetre‐thick internal laminae, oriented parallel to the outside form of the load structures and asymptotic to deformation bands. Both types of load structures formed because of an inverted density profile, earthquake‐triggered liquefaction and growth of irregularities (a Rayleigh–Taylor instability) on the sandstone–sandstone erosional contact. The internal laminae and deformation bands formed during deformation and clearly demonstrate polyphase deformation, recording a transition from liquefied to hydroplastic to brittle modes of deformation. Decimetre‐scale wedge‐shaped load structures on the edge of the large‐scale load casts probably formed towards the end of a seismic event after the sediment dewatered and increased the frictional contact of grains enough to impart strength to the sands. Metre‐scale wedge‐shaped load structures were created as the tips of downward foundering sediments were driven into fractures, which widened incrementally with seismic pulsation. With each widening of the fracture, gravity and a suction effect would draw additional sediment into the fracture. Superimposed laminae indicate a secondary syndeformational origin for internal laminae, probably by flow‐generated shearing and vibrofluidization mechanisms. Large‐scale and wedge‐shaped load structures, polyphase deformation and secondary laminae may characterize soft‐sediment deformation in certain fault‐proximal settings.     

The effect of urbanization in an arid region: Formation of a perched water table that causes environmental damages

Construction in a new neighborhood in the israeli town of Dimona, situated in an arid region in the south of the country (150 mm average annual rainfall), resulted in a rise in groundwater levels during the subsequent rainy seasons This caused flooding of shelter basements, soil sliding, and sagging which permanently damaged walls and buildings The neighborhood had been built on continental sands and marls blanketed by loess, on a valley slope near a rocky anticlinal dip-slope Subsurface studies, using piezometer holes and groundwater analyses, revealed the presence of sand lenses alternating with plastic marls, which act as seasonal aquifers with perched water tables Groundwaters obtain high SO ₄ ⁻² and Cl⁻ corrosivity through contact with these nonflushed marls of the Neogene valley fill (Hazeva Formation) The reasons for the rising of groundwater were found to be (a) artificial interference with the natural (pre-construction) drainage system—interception of the hillside runoff by building plots, roads, etc, (b) partial denudation of the loess blanket, increasing the local infiltration and the build-up of local, perched water tables, and (c) corrosion of concrete and steel pipelines, as well as foundations, by prolonged contact with corrosive groundwater, resulting in haphazard but massive leakage Guidelines are proposed for an environmental improvement plan, which would include terracing and planting of the watershed above town to increase evapotranspiration, lowering of the water table by pumping, and diverting the water to suburban parks (groves of saltresistant trees), and replacement of steel and cement pipes by a non-corrodable plastic pipe system     

The impact of different cooling strategies on urban air temperatures: the cases of Campinas,Brazil and Mendoza,Argentina

This paper describes different ways of reducing urban air temperature and their results in two cities: Campinas, Brazil—a warm temperate climate with a dry winter and hot summer (Cwa), and Mendoza, Argentina—a desert climate with cold steppe (BWk). A high-resolution microclimate modeling system—ENVI-met 3.1—was used to evaluate the thermal performance of an urban canyon in each city. A total of 18 scenarios were simulated including changes in the surface albedo, vegetation percentage, and the H/W aspect ratio of the urban canyons. These results revealed the same trend in behavior for each of the combinations of strategies evaluated in both cities. Nevertheless, these strategies produce a greater temperature reduction in the warm temperate climate (Cwa). Increasing the vegetation percentage reduces air temperatures and mean radiant temperatures in all scenarios. In addition, there is a greater decrease of urban temperature with the vegetation increase when the H/W aspect ratio is lower. Also, applying low albedo on vertical surfaces and high albedo on horizontal surfaces is successful in reducing air temperatures without raising the mean radiant temperature. The best combination of strategies—60 % of vegetation, low albedos on walls and high albedos on pavements and roofs, and 1.5 H/W—could reduce air temperatures up to 6.4 °C in Campinas and 3.5 °C in Mendoza.     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

Light-Time Effect in the Eclipsing Binaries GO Cyg, GW Cep, AR Aur and V505 Sgr

Orbital period changes of the eclipsing binaries GO Cyg and GW Cep are explained by the light-time effect for the first time. New minima of the eclipsing binary AR Aur improve the predicted light-time orbit. The light-time orbit with the quadratic ephemeris of the binary matches the new observations of V505 Sgr better than the linear one. As the light-time effect fits in corresponding O − C diagrams of all four systems have been reaching extreme values, the observations of minima times in forthcoming years are highly desirable.     

Late-Holocene paleoenvironmental change at mid-elevation on the Caribbean slope of the Cordillera Central,Dominican Republic: a multi-site,multi-proxy analysis

High-resolution proxy records from the circum-Caribbean region indicate significant variation in Late Holocene climate, especially precipitation, attributed primarily to shifts in the mean annual position of the Intertropical Convergence Zone (ITCZ). The paleoenvironmental and cultural impacts of this Late-Holocene climate variability have been analyzed intensively in the western Caribbean, and to a lesser extent in the southern Caribbean. However, the occurrence and impacts of Late Holocene climate shifts in the eastern Caribbean, especially in island interiors, has not been well documented. Here we present sediment records of Late-Holocene paleoenvironmental change from two lakes located on the Caribbean slope of the Cordillera Central in the Dominican Republic that span the last ～3000 years. Sediment characteristics, pollen, charcoal, biogenic carbonate assemblages and isotopic composition, and bulk sedimentary carbon isotope values in Laguna Castilla and Laguna de Salvador indicate extreme shifts in hydrology, vegetation, and disturbance regimes in response to climate change and human activity in the lake watersheds. Close correspondence between the hydrological histories of the lakes and trace metal concentrations in sediments of the Cariaco Basin indicate that precipitation variability here responds to the same controls, and may similarly reflect shifts in the mean annual position of the ITCZ. Human occupation of the watersheds appears to be closely linked to severe dry periods and may indicate larger scale cultural responses to precipitation variability on the island of Hispaniola. Prehistoric human populations strongly affected vegetation and disturbance regimes in the lake watersheds. Impacts may have lasted several centuries and may have been more severe than impacts of modern populations.     

Past and future sea-level rise along the coast of North Carolina,USA

We evaluate relative sea level (RSL) trajectories for North Carolina, USA, in the context of tide-gauge measurements and geological sea-level reconstructions spanning the last ~11,000 years. RSL rise was fastest (~7 mm/yr) during the early Holocene and slowed over time with the end of the deglaciation. During the pre-Industrial Common Era (i.e., 0–1800 CE), RSL rise (~0.7 to 1.1 mm/yr) was driven primarily by glacio-isostatic adjustment, though dampened by tectonic uplift along the Cape Fear Arch. Ocean/atmosphere dynamics caused centennial variability of up to ~0.6 mm/yr around the long-term rate. It is extremely likely (probability P=0.95) that 20th century RSL rise at Sand Point, NC, (2.8 ± 0.5 mm/yr) was faster than during any other century in at least 2,900 years. Projections based on a fusion of process models, statistical models, expert elicitation, and expert assessment indicate that RSL at Wilmington, NC, is very likely (P=0.90) to rise by 42–132 cm between 2000 and 2100 under the high-emissions RCP 8.5 pathway. Under all emission pathways, 21st century RSL rise is very likely (P>0.90) to be faster than during the 20th century. Due to RSL rise, under RCP 8.5, the current ‘1-in-100 year’ flood is expected at Wilmington in ~30 of the 50 years between 2050-2100.     

Knowledge diffusion from GIScience to other fields: the example of the usage of weighted surface networks in nanotechnology

This article demonstrates how the generalisation of topographic surfaces has been formalised by means of graph theory and how this formalised approach has been integrated into an ISO standard that is employed within nanotechnology. By applying concepts from higher-dimensional calculus and topology, it is shown that Morse functions are those mappings that are ideally suited for the formal characterisation of topographic surfaces. Based on this result, a data structure termed weighted surface network is defined that may be applied for both the characterisation and the generalisation of the topological structure of a topographic surface. Hereafter, the focus is laid on specific issues of the standard ISO 25178-2; within this standard change trees, a data structure similar to weighted surface networks, are applied to portray the topological information of topographic surfaces. Furthermore, an approach termed Wolf pruning is used to simplify the change tree, with this pruning method being equivalent to the graph-theoretic contractions by which weighted surface networks can be simplified. Finally, some practical applications of the standard ISO 25178-2 within nanotechnology are discussed.     

Cross-scale ensemble projections of dissolved organic carbon dynamics in boreal forest streams

Climate is an important driver of dissolved organic carbon (DOC) dynamics in boreal catchments characterized by networks of streams within forest-wetland landscape mosaics. In this paper, we assess how climate change may affect stream DOC concentrations ([DOC]) and export from boreal forest streams with a multi-model ensemble approach. First, we apply an ensemble of regional climate models (RCMs) to project soil temperatures and stream-flows. These data are then used to drive two biogeochemical models of surface water DOC: (1) The Integrated Catchment model for Carbon (INCA-C), a detailed process-based model of DOC operating at the catchment scale, and (2) The Riparian Integration Model (RIM), a simple dynamic hillslope scale model of stream [DOC]. All RCMs project a consistent increase in temperature and precipitation as well as a shift in spring runoff peaks from May to April. However, they present a considerable range of possible future runoff conditions with an ensemble median increase of 31 % between current and future (2061–2090) conditions. Both biogeochemical models perform well in describing the dynamics of present-day stream [DOC] and fluxes, but disagree in their future projections. Here, we assess possible futures in three boreal catchments representative of forest, mire and mixed landscape elements. INCA-C projects a wider range of stream [DOC] due to its temperature sensitivity, whereas RIM gives consistently larger inter-annual variation and a wider range of exports due to its sensitivity to hydrological variations. The uncertainties associated with modeling complex processes that control future DOC dynamics in boreal and temperate catchments are still the main limitation to our understanding of DOC mechanisms under changing climate conditions. Novel, currently overlooked or unknown drivers may appear that will present new challenges to modelling DOC in the future.