Toxic cyanobacteria at Nakuru sewage oxidation ponds - A potential threat to wildlife

Phytoplankton composition and biomass, and microcystin content were determined on diverse dates between November 2001 and June 2006 in the final oxidation pond of the Nakuru town sewage treatment plant. The oxidation ponds as well as the rivulet that drains the same are important water sources for some wildlife in the park. The phytoplankton composition of the pond studied mostly comprised coccoid green alga species. However, occasionally cyanobacteria or euglenoids were dominant. Among the cyanobacteria, Microcystis sp. made periodic appearance in the phytoplankton, and was the dominant species on some occasions. Total phytoplankton biomass varied widely from 48 to 135 mg L⁻¹ (wet weight) while cyanobacteria biomass ranged from undetectable levels to 130 mg L⁻¹. Most phytoplankton biomass was due to one or a few species. Detectable cyanotoxin concentrations (sum of microcystins) of up to 551.08 μg mg⁻¹ dry weight (DW) of cyanobacteria biomass or 0.28 μg mg⁻¹ DW of total phytoplankton biomass were recorded in samples collected on different dates. Microcystin content did not appear to correspond to the biomass of cyanobacteria suggesting that toxin production is possibly triggered by environmental changes or changes in the proportion of toxic strains. An occasional presence of microcystins in the pond water suggests that the wildlife species, which regularly use the ponds as drinking water sources are potentially exposed to intoxication. A close monitoring of pond water phytoplankton composition is necessary to accurately quantify the potential impact of cyanotoxins on these wildlife species.     

Snow model sensitivity analysis to understand spatial and temporal snow dynamics in a high‐elevation catchment

In this paper, we addressed a sensitivity analysis of the snow module of the GEOtop2.0 model at point and catchment scale in a small high‐elevation catchment in the Eastern Italian Alps (catchment size: 61 km²). Simulated snow depth and snow water equivalent at the point scale were compared with measured data at four locations from 2009 to 2013. At the catchment scale, simulated snow‐covered area (SCA) was compared with binary snow cover maps derived from moderate‐resolution imaging spectroradiometer (MODIS) and Landsat satellite imagery. Sensitivity analyses were used to assess the effect of different model parameterizations on model performance at both scales and the effect of different thresholds of simulated snow depth on the agreement with MODIS data. Our results at point scale indicated that modifying only the “snow correction factor” resulted in substantial improvements of the snow model and effectively compensated inaccurate winter precipitation by enhancing snow accumulation. SCA inaccuracies at catchment scale during accumulation and melt period were affected little by different snow depth thresholds when using calibrated winter precipitation from point scale. However, inaccuracies were strongly controlled by topographic characteristics and model parameterizations driving snow albedo (“snow ageing coefficient” and “extinction of snow albedo”) during accumulation and melt period. Although highest accuracies (overall accuracy = 1 in 86% of the catchment area) were observed during winter, lower accuracies (overall accuracy < 0.7) occurred during the early accumulation and melt period (in 29% and 23%, respectively), mostly present in areas with grassland and forest, slopes of 20–40°, areas exposed NW or areas with a topographic roughness index of ?0.25 to 0 m. These findings may give recommendations for defining more effective model parameterization strategies and guide future work, in which simulated and MODIS SCA may be combined to generate improved products for SCA monitoring in Alpine catchments.     

Tomographic reconstruction of gas plumes using scanning DOAS

This paper presents a method to reconstruct the gas distribution inside a vertical cross section of a gas plume by combining data from two or more scanning DOAS instruments using a tomographic algorithm. The method can be applied to gas plumes from any single, elevated point source, such as a volcano or industrial chimney. Such two-dimensional concentration distributions may prove to be useful for example in plume chemistry, dispersion and environmental impact studies. Here we show the case with one scanning DOAS instrument located on each side of the plume, which is the easiest and most economic setup as well as the most useful in routine monitoring of e.g. volcanic gas emissions. The paper investigates the conditions under which tomographic reconstructions can be performed and discusses limitations of this setup. The proposed method has been studied theoretically by numerical simulations and has been experimentally tested during two field campaigns, with measurements of SO₂ emissions from a volcano and a power plant. The simulations show that, under good measurement conditions, the algorithm presented performs well, which is further confirmed by the experimental results.     

Copepod grazing during spring blooms: Does Calanus pacificus avoid harmful diatoms?

During late winter and spring of 2002 and 2003, 24, 2–3 day cruises were conducted to Dabob Bay, Washington State, USA, to examine the grazing, egg production, and hatching success rates of adult female Calanus pacificus and Pseudocalanus newmani. The results of the copepod grazing experiments for C. pacificus are discussed here. Each week, copepod grazing incubation experiments from two different depth layers were conducted. Grazing was measured by both changes in chlorophyll concentration and cell counts. In 2002, there was one moderate bloom consisting mainly of Thalassiosira spp. in early February, and a larger bloom in April comprised of two Chaetoceros species and Phaeocystis sp. Similarly, in 2003, there were two blooms, an early one dominated by Thalassiosira spp., and a later one consisting of Chaetoceros spp. and Thalassiosira spp. Clearance rates on individual prey species, as calculated by cell counts, showed that C. pacificus are highly selective in their feeding, and may have much higher clearance rates on individual taxa than rates calculated from bulk chlorophyll disappearance. During weeks of high phytoplankton concentration, the copepods generally ate phytoplankton. However, they often rejected the most abundant phytoplankton species, particularly certain Thalassiosira spp., even though the rejected prey were often of the same genus and similar size to the preferred prey. It is speculated that this avoidance may be related to the possible deleterious effects that certain of these diatom species have on the reproductive success of these copepods. During weeks of medium to low phytoplankton concentration, the copepods selectively ate certain species of phytoplankton, and often had high electivity for microzooplankton. The selection mechanism must consist of active particle rejection most likely based on detection of surface chemical properties, since the diatoms that were selected were of the same genus, nearly the same size, and at lower numerical abundance than those cells that were avoided. The grazing choices made by these copepods may have important consequences for the overall ecosystem function within coastal and estuarine systems through changes in the transfer efficiency of energy to higher trophic levels.     

The forward problem of electromagnetic induction: accurate finite-difference approximations for two-dimensional discrete boundaries with arbitrary geometry

We describe finite-difference approximations to the equations of 2-D electromagnetic induction that permit discrete boundaries to have arbitrary geometrical relationships to the nodes. This allows finite-difference modelling with the flexibility normally ascribed to finite-element modelling. Accuracy is demonstrated by comparison with finite-element computations. We also show that related approximations lead to substantially improved accuracy in regions of steep, but not discontinuous, conductivity gradient.     

Great South Bay After Sandy: Changes in Circulation and Flushing due to New Inlet

The coastal ocean model FVCOM is applied to quantify the changes in circulation, flushing, and exposure time in Great South Bay, New York, after Superstorm Sandy breached the barrier island in 2012. Since then, the lagoon system is connected to the Atlantic via five instead of four inlets. The model simulations are run on two high-resolution unstructured grids, one for the pre-breach configuration, one including the new inlet, with tidal-only forcing, and summer and winter forcing conditions. Despite its small cross-sectional size, the breach has a relatively large net inflow that leads to a strengthening of the along-bay through-flow in Great South Bay (GSB); the tidally driven volume transport in central GSB quadrupled. The seasonal forcing scenarios show that the southwesterly sea breeze in summer slows down the tidally driven flow, while the forcing conditions in winter are highly variable, and the circulation is dependent on wind direction and offshore sea level. Changes in flushing and exposure time associated with the modified transport patterns are evaluated using a Eulerian passive tracer technique. Results show that the new inlet produced a significant decrease in flushing time (approximately 35% reduction under summer wind conditions and 20% reduction under winter wind conditions). Maps of exposure time reflect the local changes in circulation and flushing.     

The fate of dumped sediments monitored by a high-resolution multibeam echosounder system,Weser Estuary,German Bight

With the development of high-resolution multibeam echosounder systems (MBES) for surveying shallow-water areas a new tool is available to monitor rapid changes in seabed morphology as, e.g., caused by the dumping of dredge spoil in coastal waters. In this study, four data sets of repeated bathymetric surveys with a MBES were processed and analyzed. The data were collected in a 1.94-km² dumping site in the outer Weser Estuary (German Bight). Between June and December 1998, 2.6 million m³ of dredged sediment were deposited there. The bathymetric maps generated in the course of this study reveal features such as subaqueous dunes, scour holes, and mounds of dumped dredge spoil. The mean water depth decreased by about 1 m during the dumping period. Furthermore, difference grids showing changes in sediment volume allowed a calculation of the sediment budget for the monitored area. After a time period of only 5 months, 0.5 million m³ of the originally dumped 2.6 million m³ of dredge spoil had already been removed from the dumping site.     

Scleractinian cold-water corals in the Gulf of Cádiz—First clues about their spatial and temporal distribution

This paper presents the first compilation of information on the spatial distribution of scleractinian cold-water corals in the Gulf of Cádiz based on literature research and own observations (video footage, sediment samples). Scleractinian cold-water corals are widely distributed along the Spanish and Moroccan margins in the Gulf of Cádiz, where they are mainly associated with mud volcanoes, diapiric ridges, steep fault escarpments, and coral mounds. Dendrophyllia cornigera, Dendrophyllia alternata, Eguchipsammia cornucopia, Madrepora oculata and Lophelia pertusa are the most abundant reef-forming species. Today, they are almost solely present as isolated patches of fossil coral and coral rubble. The absence of living scleractinian corals is likely related to a reduced food supply caused by low productivity and diminished tidal effects. In contrast, during the past 48 kyr scleractinian corals were abundant in the Gulf of Cádiz, although their occurrence demonstrates no relationship with main climatic or oceanographic changes. Nevertheless, there exists a conspicuous relationship when the main species are considered separately. Dendrophylliids are associated with periods of relatively stable and warm conditions. The occurrence of L. pertusa mainly clusters within the last glacial when bottom current strength in the Gulf of Cádiz was enhanced and long-term stable conditions existed in terms of temperature. Madrepora oculata shows a higher tolerance to abrupt environmental changes.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

A novel methodological approach for land subsidence prediction through data assimilation techniques

Computational Geosciences - Anthropogenic land subsidence can be evaluated and predicted by numerical models, which are often built over deterministic analyses. However, uncertainties and...