Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Tectonics of the western margin of the Shan plateau (central Myanmar): implication for the India–Indochina oblique convergence since the Oligocene

We present new data and interpretations on the Neogene tectonics of the Shan scarp area (central Myanmar) and its relationship with the India–Indochina oblique convergence. We describe ductile and brittle fabrics associated with the major features in this area, the Mogok Metamorphic Belt (MMB), the Shan scarp and the Sagaing fault. From these data we identify a succession of two tectonic regimes. First, a dominant NNW–SSE-trending extension, marked by ductile stretching that characterizes the MMB, and associated N70E brittle normal faults. Later, from Middle or Upper Miocene to the Present, these structures were cross-cut by brittle right-lateral faults, among which the most important are the N20W transpressive Shan scarp fault zone and the N–S Sagaing fault. To explain this transition from a dominant transtensive to a transpressive stress regime, that occurred during Miocene, we place our data within a larger geodynamic context. We suggest that, like the intraplate deformation in the Indian Ocean, the end of spreading in the South China sea, the opening of the Andaman basin or the end of subduction within the Indo-Burma range, the change in the tectonic regime in central Myanmar could be in response to a major Miocene regional plate kinematic reorganization.     

Applications géodésiques du système DORIS à l'Institut géographique national

IGN is in charge of the installation and maintenance of the DORIS orbit determination network. More recently, in collaboration with JPL, precise geodetic computations were performed. The goal of this paper is to recall the various historic contributions of IGN to the DORIS system in their international context and then to describe a new estimation technique developed for a multi-satellite mode, making full profit of a better modeling for satellites and ground clocks as well as tropospheric correction parameters. Derived geodetic results demonstrate a precision in the order of 1 cm for station positions. To cite this article: P. Willis et al., C. R. Geoscience 337 (2005).     

Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

L'archivage des activités humaines par les neiges et glaces polaires : le cas du plomb

The investigation of the occurrence of lead in dated snow and ice from Greenland and Antarctica has played a major role in our understanding of the history of the pollution of the atmosphere of our planet by this metal. Such studies have however proved to be very demanding, mainly because of the extreme purity of polar snow and ice. Reliable measurements can be obtained only if ultra-clean and highly sensitive procedures are used, as pioneered by Clair Patterson. The Greenland data show evidence of large-scale pollution of the atmosphere of the Northern Hemisphere for lead as early as two millennia ago during Greco–Roman times, especially because of mining and smelting activities in southern Spain. It peaked at the end of the 1960s, with lead concentrations in snow about 200 times higher than natural values, before declining during recent times because of the fall in the use of leaded gasoline. Lead pollution in Antarctica was already significant at the end of the 19th century as a consequence of whaling activities, the traffic of coal-powered ships crossing the Cape Horn, and mining activities in South America, South Africa and Australia. After declining because of the opening of the Panama Canal, the great economic depression and World War II, it reached a maximum during the 1980s, with lead concentrations 20 times higher than natural values. Other studies focus on past natural variations of lead in ancient ice dated from the last climatic cycles. To cite this article: C. Boutron et al., C. R. Geoscience 336 (2004).     

From outwash to coastal systems in the Portneuf–Forestville deltaic complex (Québec North Shore): Anatomy of a forced regressive deglacial sequence

Deglacial sequences typically include backstepping grounding zone wedges and prevailing glaciomarine depositional facies. However, in coastal domains, deglacial sequences are dominated by depositional systems ranging from turbiditic to fluvial facies. Such deglacial sequences are strongly impacted by glacio‐isostatic rebound, the rate and amplitude of which commonly outpaces those of post‐glacial eustatic sea‐level rise. This results in a sustained relative sea‐level fall covering the entire depositional time interval. This paper examines a Late Quaternary, forced regressive, deglacial sequence located on the North Shore of the St. Lawrence Estuary (Portneuf Peninsula, Québec, Canada) and aims to decipher the main controls that governed its stratigraphic architecture. The forced regressive deglacial sequence forms a thick (>100 m) and extensive (>100 km²) multiphased deltaic complex emplaced after the retreat of the Laurentide Ice Sheet margin from the study area ca 12 500 years ago. The sedimentary succession is composed of ice‐contact, glaciomarine, turbiditic, deltaic, fluvial and coastal depositional units. A four‐stage development is recognized: (i) an early ice‐contact stage (esker, glaciomarine mud and outwash fan); (ii) an in‐valley progradational stage (fjord head or moraine‐dammed lacustrine deltas) fed by glacigenics; (iii) an open‐coast deltaic progradation, when proglacial depositional systems expanded beyond the valley outlets and merged together; and (iv) a final stage of river entrenchment and shallow marine reworking that affected the previously emplaced deltaic complex. Most of the sedimentary volume (10 to 15 km³) was emplaced during the three‐first stages over a ca 2 kyr interval. In spite of sustained high rates of relative sea‐level fall (50 to 30 mm·year^?1), delta plain accretion occurred up to the end of the proglacial open‐coast progradational stage. River entrenchment only occurred later, after a significant decrease in the relative sea‐level fall rates (<30 mm·year^?1), and was concurrent with the formation and preservation of extensive coastal deposits (raised beaches, spit platform and barrier sands). The turnaround from delta plain accretion to river entrenchment and coastal erosion is interpreted to be a consequence of the retreat of the ice margin from the river drainage basins that led to the drastic drop of sediment supply and the abrupt decrease in progradation rates. The main internal stratigraphic discontinuity within the forced regressive deglacial sequence does not reflect changes in relative sea‐level variations.     

Chronology of Quaternary terrace deposits at the locality Hohle Gasse (Pratteln,NW Switzerland)

The Quaternary stratigraphy of the Alpine Foreland consists of distinct terrace levels, which have been assigned to four morphostratigraphic units: Höhere (Higher) Deckenschotter, Tiefere (Lower) Deckenschotter, Hochterrasse (High Terrace) and Niederterrasse (Lower Terrace). Here, we focus on the terrace gravels at Hohle Gasse, SSE of Pratteln near Basel, which are mapped as Tiefere Deckenschotter. Petrographic and morphometric data established from clasts allowed to infer the transport mechanisms and sources of the gravels. Sedimentological analyses indicate that the gravels were transported by a braided river and deposited in a distal glaciofluvial setting. In addition, it can be shown that the majority of the clasts display multiple reworking and only a minority maintained a distinct glaciofluvial shape. Cosmogenic multi-isotope dating using ¹⁰Be and ³⁶Cl allowed direct dating of the sediments at the study site. A depth-profile age of \(2 70_{ - 1 90}^{ + 8 30}\) ka for ¹⁰Be was achieved for the deposits at Hohle Gasse. Unfortunately, no age could be modelled from the ³⁶Cl concentrations as the blank correction was too high. Furthermore, this age proves that the studied terrace level should be assigned to the morphostratigraphic unit Hochterrasse.     

Comparative studies of the kinetic parameters of various algaenans and kerogens via open-system pyrolyses

Kinetic parameters were determined for the first time, via open-system pyrolyses, on algaenans (highly resistant biomacromolecules that are selectively preserved during kerogen formation) isolated from extant microalgae. Parallel studies were also carried out on 10 kerogens exhibiting, with one exception, a low level of maturity. These kerogens included samples chiefly derived from the selective preservation of the above algaenans and samples mainly, or almost exclusively, derived from the “natural vulcanization” pathway. Important differences in activation energy (E_a) distributions were observed between the four algaenans investigated and correlated with their chemical structures. The kerogens predominantly derived from algaenan-selective preservation (Pula alginite, NE 70 and BJ 248 Torbanites, Rundle Oil Shale) also exhibited pronounced differences in E_a distributions. These distributions provided: (i) information on the diversity of the source materials; and (ii) reflected the occurrence of important differences in chemical structures and thermal behaviour between three of the tested kerogens, even though they are all classified as low maturity type I. The Kimmeridge Clay samples and the Lorca Oil Shale showed broad E_a distributions shifted to low energies when compared with the above algaenans and kerogens. Such shifts reflect an important (or even almost exclusive for some of these kerogens) contribution of materials originating from sulphur incorporation into various lipids during early diagenesis. Finally, the kinetic data derived for the nine low maturity fossil samples were extrapolated to a very low, geological heating rate of 3°C Ma⁻¹ and the generation rate curves and cumulative yield curves thus obtained were compared.     

Estimation of viscoelastic attenuation of real seismic data by use of ray tracing software: Application to the detection of gas hydrates and free gas

Analysis of P wave velocity profiles and seismic data recorded over the 2002 Hydratech cruise conducted in the Storegga region, North of Norway, has shown the existence of anomalies (a velocity decrease) in some layers of the medium. An elastic propagation model is not sufficient to explain clearly these anomalies, since the viscoelastic attenuation, represented by the quality factor Q_P, is sensitive to physical phenomena of geological media. The combination of the quality factor profile with the velocity profile leads to realistic explanations of these anomalies. In this article, we explain the procedure which we developed for determining the Q_P profile from the P wave velocity profile and the seismic data recorded during Hydratech cruise. Both the Q_P and velocity profiles indicate anomalies in the same layers. Based on previous studies, we interpret that these anomalies are being due to existence of gas hydrates and free gas within these layers.     

Aerosol polarized phase function and single-scattering albedo retrieved from ground-based measurements

Aerosol optical parameters, polarized phase function and single-scattering albdeo, have been retrieved from ground-based sun photometer measurements in Beijing 2003. The measured aerosol optical thickness varies from 0.12 to 0.77 with an average value of 0.39. The measured Ångström coefficient ranges from 0.75 to 1.47 with an average value of 1.21. The retrieved single-scattering albedo at 870 nm is within the 0.76–0.94 range and the average value is 0.85, suggests there are considerable aerosol absorptions in Beijing. The maximum value of retrieved polarized phase function at 870 nm ranges from 0.068 to 0.225 with an average value of 0.16, and it illustrates good correlations with the Ångström coefficient, i.e. the relative size of aerosol particles. Analyses of measurements and theoretical calculations show the polarized phase function is sensitive to aerosol size distribution and complex refractive index, especially the imaginary part of the refractive index which denotes aerosol light absorbing effects. These results suggest that the polarized phase function is an effective and unique aerosol optical parameter and is able to improve the retrieval of aerosol physical properties.