Comparison of undulation difference accuracies using gravity anomalies and gravity disturbances

Errors are considered in the outer zone contribution to oceanic undulation differences as obtained from a set of potential coefficients complete to degree 180. It is assumed that the gravity data of the inner zone (a spherical cap), consisting of either gravity anomalies or gravity disturbances, has negligible error. This implies that error estimates of the total undulation difference are analyzed. If the potential coefficients are derived from a global field of 1°×1° mean anomalies accurate to ε_Δg=10 mgal, then for a cap radius of 10°, the undulation difference error (for separations between 100 km and 2000 km) ranges from 13 cm to 55 cm in the gravity anomaly case and from 6 cm to 36 cm in the gravity disturbance case. If ε_Δg is reduced to 1 mgal, these errors in both cases are less than 10 cm. In the absence of a spherical cap, both cases yield identical error estimates: about 68 cm if ε_Δg=1 mgal (for most separations) and ranging from 93 cm to 160 cm if ε_Δg=10 mgal. Introducing a perfect 30-degree reference field, the latter errors are reduced to about 110 cm for most separations.     

The downward continuation of aerial gravimetric data without density hypothesis

Techniques for downward continuing gravity field data from aircraft altitude are well established if the earth's surface is either approximated by a plane or sphere, or is replaced by one of these surfaces using terrain corrections based on a density model. An alternative procedure is presented here where the continuation is analytical to a nontrivial surface, such as the actual topographic surface. Terrain elevations must be given, but density information is specifically not used.     

A Comprehensive Framework for Intrinsic OpenStreetMap Quality Analysis

OpenStreetMap (OSM) is one of the most popular examples of a Volunteered Geographic Information (VGI) project. In the past years it has become a serious alternative source for geodata. Since the quality of OSM data can vary strongly, different aspects have been investigated in several scientific studies. In most cases the data is compared with commercial or administrative datasets which, however, are not always accessible due to the lack of availability, contradictory licensing restrictions or high procurement costs. In this investigation a framework containing more than 25 methods and indicators is presented, allowing OSM quality assessments based solely on the data's history. Without the usage of a reference data set, approximate statements on OSM data quality are possible. For this purpose existing methods are taken up, developed further, and integrated into an extensible open source framework. This enables arbitrarily repeatable intrinsic OSM quality analyses for any part of the world.     

Tessellations in GIS: Part II–making changes

Abstract

We attempt to describe the role of tessellated models of space within the discipline of Geographic Information Systems (GIS) – a speciality coming largely out of Geography and Land Surveying, where there was a strong need to represent information about the land’s surface within a computer system rather than on the original paper maps. We look at some of the basic operations in GIS, including dynamic and kinetic applications. We examine issues of topology and data structures, and produced a tessellation model that may be widely applied both to traditional “object” and “field” data types. The Part I of this study examined object and field spatial models, the Voronoi extension of objects, and the graphs that express the resulting adjacencies. The required data structures were also briefly described, along with 2D and 3D structures and hierarchical indexing. The importance of graph duality was emphasized. Here, this second paper builds on the structures described in the first, and examines how these may be modified: change may often be associated with either viewpoint or time. Incremental algorithms permit additional point insertion, and applications involving the addition of skeleton points, for map scanning, contour enrichment or watershed delineation and simulation. Dynamic algorithms permit skeleton smoothing, and higher order Voronoi diagram applications, including Sibson interpolation. Kinetic algorithms allow collision detection applications, free-Lagrange flow modeling, and pen movement simulation for map drawing. If desired these methods may be extended to 3D. Based on this framework, it can be argued that tessellation models are fundamental to our understanding and processing of geographical space, and provide a coherent framework for understanding the “space” in which we exist.     

Geomorphic analysis reveals active tectonic deformation on the eastern flank of the Pir Panjal Range,Kashmir Valley,India

There are plenty of faults that show evidence that they are active. Most of the valley’s floor is occupied by unconsolidated Karewa deposits, in particular on the south–southwest of the Kashmir Valley. In such situations, geomorphic data can reveal the location of active faults. Accordingly, we tried to identify geomorphic indices in SW of the Kashmir Valley (Veshav, Rambiara, and Romushi drainage basins), which revealed the area to be potentially tectonically active. This active faulting was further substantiated by drainage anomalies and field investigations, which provides evidence for an emergent out-of-sequence NE-dipping active reverse fault (identified first time on ground) named the Balapur Fault (BF). The BF can be traced over at least 40 km along the southwest side of the Kashmir Valley. The existence of the active Balapur Fault and of two other inferred faults north of the Panjal Thrust or Murree Thrust presents a picture of a more complex strain-partitioning regime in the Kashmir Himalayas than is usually visualized.     

An automated 3D modeling of topological indoor navigation network

Indoor navigation is important for various applications such as disaster management, building modeling, safety analysis etc. In the last decade, indoor environment has been a focus of wide research that includes development of indoor data acquisition techniques, 3D data modeling and indoor navigation. In this research, an automated method for 3D modeling of indoor navigation network has been presented. 3D indoor navigation modeling requires a valid 3D model that can be represented as a cell complex: a model without any gap or intersection such that two cells (e.g. room, corridor) perfectly touch each other. This research investigates an automated method for 3D modeling of indoor navigation network using a geometrical model of indoor building environment. In order to reduce time and cost of surveying process, Trimble LaserAce 1000 laser rangefinder was used to acquire indoor building data which led to the acquisition of an inaccurate geometry of building. The connection between surveying benchmarks was established using Delaunay triangulation. Dijkstra algorithm was used to find shortest path in between building floors. The modeling results were evaluated against an accurate geometry of indoor building environment which was acquired using highly-accurate Trimble M3 total station. This research intends to investigate and propose a novel method of topological navigation network modeling with a less accurate geometrical model to overcome the need of required an accurate geometrical model. To control the uncertainty of the calibration and of the reconstruction of the building from the measurements, interval analysis and homotopy continuation will be investigated in the near future.     

Remineralization Ratios in the Subtropical North Pacific Gyre

Based on a new mixing model of two end-members, the water column remineralization ratios of P/N/C_org - O₂ = 1/13 ± 1/135 ± 18/170 ± 9 are obtained for the Hawaii Ocean Time-series (HOT) data set at station ALOHA. The traditional Redfield ratios of P/N/C_org/–O₂ = 1/16/106/138 have standard deviations of more than 50%, when they are based on the average composition of phytoplankton. Apparently, the remineralization processes in the water column have smoothed out the observed large variability of plankton compositions. A new molar formula for the remineralized plankton may be written as ₁₃₅H₂₈₀O₁₀₅N₁₃P or C₂₅(CH₂O)₁₀₁(CH₄)₉(NH₃)₁₃(H₃PO₄). Oxidation of this formula results inC₂₅(CH₂O)₁₀₁(CH₄)₉(NH₃)₁₃(H₃PO₄) + 170O₂ 135CO₂ + 132H₂O + 13NO₃ ^- + H₂PO₄ ^- + 14H⁺.For comparison, remineralization using Redfield's formula gives:(CH₂O)₁₀₆(NH₃)₁₆(H₃PO₄) + 138O₂ 106CO₂ + 122H₂O + 16NO₃ ^-+ H₂PO₄ ^- + 17H⁺     

Carbon budget for a subtropical seagrass dominated coastal lagoon: How important are seagrasses to total ecosystem net primary production?

It has been assumed that because seagrasses dominate macrophyte biomass in many estuaries they also dominate primary production. We tested this assumption by developing three carbon budgets to examine the contribution of autotrophic components to the total ecosystem net primary production (TENPP) of Lower Laguna Madre, Texas. The first budget coupled average photosynthetic parameters with average daily irradiance to calculate daily production. The second budget used average photosynthetic parameters and hourly in situ irradiance to estimate productivity. The third budget integrated temperature-adjusted photosynthetic parameters (using Q₁₀=2) and hourly in situ irradiance to estimate productivity. For each budget TENPP was calculated by integrating production from each autotroph based on the producers’ areal distribution within the entire Lower Laguna Madre. All budgets indicated that macroalgae account for 33–42% of TENPP and seagrasses consistently accounted for about 33–38%. The contribution by phytoplankton was consistently about 15–20%, and the contribution from the benthic microalgae varied between 8% and 36% of TENPP, although this may have been underestimated due to our exclusion of the within bed microphytobenthos component. The water column over the seagrass beds was net heterotrophic and consequently was a carbon sink consuming between 5% and 22% of TENPP, TENPP ranged between 5.41×10¹⁰ and 2.53×10¹¹ g C yr⁻¹, depending on which budget was used. The simplest, most idealized budget predicted the highest TENPP, while the more realistic budgets predicted lower values. Annual production rates estimated using the third budget forHalodule urightii andThalassia testudinum compare well with field data. Macroalgae and microalgae contribute 50–60% of TENPP, and seagrass may be more important as three-dimensional habitat (i.e., structure) than as a source of organic carbon to the water column in Lower Laguna Madre.