ESR chronology of the Somme River Terrace system and first human settlements in Northern France

The Somme Valley, Northern France, is famous for its archaeological sequence, where numerous rich Palaeolithic sites, such as Saint-Acheul, the type site of the Acheulian, have been discovered. The archaeological levels are often directly associated with fossil alluvial sediments of the River Somme or with slope deposits, including loess and palaeosols. In the middle reaches of the valley, near Amiens, the system of fossil-stepped fluvial terraces is particularly well developed and preserved, and occurs on 10 alluvial formations. These terraces, from +5 to +55 m above the present-day valley bedrock, allow the study of the environmental changes and the human settlement of this area through the Pleistocene.

Since 1988, ESR dating was systematically applied on bleached quartz extracted from the fossil fluvial deposits, in order to better describe the geological evolution of the stepped system. More recently, U-series/ESR dating has also been performed on teeth collected from the different terrace deposits. Here we present a synthetic review of the main ESR results, and propose an ESR chronology for the geological evolution of the Somme fluvial system and for the Middle Pleistocene human settlement of northern France.     

Apport des marqueurs isotopiques et biogéochimiques dans la reconstitution du paléoenvironnement de la grotte du Lazaret (Nice,Alpes-Maritimes) au cours du Pléistocène supérieur (stade isotopique 5)

The isotopic composition of calcite from the stalagmitic floor E of the Lazaret Cave is interpreted as proxy of atmospheric circulation and vegetal cover changes during IOS 5. The ${\delta }^{18}\mathrm{O}$ variations could indicate change in precipitation sources, which could originate from the Mediterranean Sea during warm periods and from the Atlantic Ocean during colder periods. The ${\delta }^{13}\mathrm{C}$ variations could be related to vegetal cover and soil type. Tree cover appears to be dominant according to pollen spectra, and organic molecules trapped into calcite (sterols, terpenoids, humic acids). To cite this article: L. Rousseau et al., C. R. Geoscience 337 (2005).     

Weathering of sandstone lotus petals at the Angkor site: a 1,000-year stone durability trial

This article is based on field investigations carried out at Ta Keo and Banteay Srei temples (Angkor, Cambodia), which have similar environmental histories and display the same recurrent decorative pattern (lotus petal) in three different sandstone lithotypes. Based on two original scales of mechanical and chemical weathering, the degree of deterioration of c.2000 sandstone petals was visually assessed, resulting in the proposal of a durability scale. An explanatory scheme was provided, based on laboratory analyses of stone materials (ICP-AES, XRD, SEM-EDS, polarizing microscopy and mercury injection). The key drivers of sandstone durability are both mineralogical and petrophysical. The remarkable preservation of the pink sandstone is due to the quartzose nature of its clasts, the non-swelling clay content of its abundant matrix (kaolinite) and its porosity structure (large connected pores and probable non-connected porosity). The overall good preservation of the green sandstone is due to its extremely low porosity and specific surface area, associated with its strong cementation. The severe deterioration of the grey sandstone is due to its laminated structure (oriented biotites), the susceptibility to hygric swelling and solution of its binding agents (chlorite/smectite and calcite) and its porosity structure, which evolves during a two-stage weathering sequence. The first stage is characterized by a bimodal porosity due to the partial clogging of macropores by swelling clays, and the second stage by a substantial increase in porosity and the penetration of salts (barite and anhydrite). Conversely, oxidation phenomena associated with weathering can lead to a drastic reduction of porosity.     

Hydrothermalism in the Tyrrhenian Sea: Inorganic and microbial sulfur cycling as revealed by geochemical and multiple sulfur isotope data

The Palinuro volcanic complex and the Panarea hydrothermal field, both located in the Tyrrhenian Sea (Italy), are associated with island arc magmatism and characterized by polymetallic sulfide mineralization. Dissolved sulfide concentrations, pH, and Eh measured in porewaters at both sites reveal a variable hydrothermal influence on porewater chemistry.Multiple sulfur isotopic measurements for disseminated sulfides (CRS: chromium reducible sulfur) extracted from sediments at Palinuro yielded a broad range in δ³⁴S range between ?29.8 and + 10.2‰ and Δ³³S values between + 0.015 and + 0.134‰. In contrast, sediments at Panarea exhibit a much smaller range in δ³⁴S_CRS with less negative values between ?11.3 and ?1.8‰. The sulfur isotope signatures are interpreted to reflect a mixture between hydrothermal and biogenic sulfide, with a more substantial biogenic contribution at Panarea.Multiple sulfur isotope measurements were performed on sulfides and elemental sulfur from drill core material from the Palinuro massive sulfide complex. δ³⁴S and Δ³³S values for pyrite between ?32.8 and ?1.1‰ and between ?0.012 to + 0.042‰, respectively, as well as for elemental sulfur with δ³⁴S and Δ³³S values between ?26.7 and ?2.1‰ and between + 0.035 and + 0.109‰, respectively, point to a microbial origin for much of the sulfide and elemental sulfur studied. Moreover, data suggest a coupling of bacterial sulfate reduction, sulfide oxidation and sulfur disproportionation. In addition, δ³⁴S values for barite between + 25.0 and + 63.6‰ are also in agreement with high microbial turnover of sulfate at Palinuro.Although a magmatic SO₂ contribution towards the formation of the Palinuro massive sulfide complex is very likely, the activity of different sulfur utilizing microorganisms played a fundamental role during its formation. Thus, porewater and multiple sulfur isotope data reveal differences in the hydrothermal activity at Palinuro and Panarea drill sites and underline the importance of microbial communities for the origin of massive sulfide mineralizations in the hydrothermal subsurface.     

A New Interlaboratory Characterisation of Silicon,Rare Earth Elements and Twenty‐Two Other Trace Element Concentrations in the Natural River Water Certified Reference Material SLRS‐6 (NRC‐CNRC)

The natural river water reference material SLRS‐6 (NRC‐CNRC) is the newest batch of a quality control material routinely used in many international environmental laboratories. This work presents a nine‐laboratory compilation of measurements of major and trace element concentrations and their related uncertainties, unavailable in the NRC‐CNRC certificate (B, Cs, Li, Ga, Ge, Hf, Nb, P, Rb, Rh, Re, S, Sc, Se, Si, Sn, Th, Ti, Tl, W, Y, Y, Zr and REEs). Measurements were mostly made using inductively coupled plasma‐mass spectrometry. The results are compared with equivalent data for the last batch of the material, SLRS‐5, measured simultaneously with SLRS‐6 in this study. In general, very low concentrations, close to the quantification limits, were found in the new batch. The Sr isotopic ratio is also reported.     

易破碎粒状材料本构研究

粒状材料被广泛地应用到土木工程的各个领域。大部分粒状材料在外力作用下较容易产生颗粒破碎,颗粒破碎对材料的力学性能有很大的影响。为了更好地描述易破碎粒状材料的力学特性,基于弹塑性力学和临界状态土力学开发了一种能够考虑颗粒破碎效应的本构模型。此本构模型能够考虑在剪应力和压应力作用下引起的颗粒破碎对粒状材料力学性能的影响。为了考虑颗粒破碎的影响,基于对Cambria 砂的高压试验,得出了临界状态线位置与消耗塑性功之间的关系,并称之为“破碎方程”。此本构模型拥有双屈服面,分别考虑剪切和等向压缩产生的塑性变形。通过试验结果与数值计算结果的对比得出,新的本构模型能较好地描述易破碎粒状材料的力学特性     

Sedimentary responses to the Pleistocene climatic variations recorded in the South China Sea

Grain-size analyses, coupled with end-member modelling, have been performed on the terrigenous fraction of two Leg 184 Ocean Drilling Program sites (1144 and 1146) from the South China Sea. The grain-size distributions over the last 1.8 Ma enable a new interpretation of their connections to sea-level variations and East Asian monsoon strength. Previous investigations in this area have associated grain-size variability with enhanced eolian input during glacial stages. End-member modelling downgrades the importance of this eolian contribution and indicates that the sediments can be described as a mixture of three end-members: fluvial mud inputs, shelf reworking and river mouth migration. Grain-size variations in the Pleistocene section of the cores indicate a multiple-stage evolution: (i) from 1.8 to 1.25 Ma, the downcore grain-size variations are low but show a correspondence between monsoon rainfall intensity and the fine grain-sized fluvial inputs; no link with sea-level variations is noticeable; (ii) from 1.25 to 0.9 Ma, there is an increase (decrease) in the intermediate (fine) end-member (∼ 100 kyr cycle) that is associated with the onset of a stronger summer monsoon and modest shelf reworking; (iii) from 0.9 to 0 Ma the grain-size record is dominated by global sea-level variations; each glacial stage is associated with extensive shelf reworking and conveyance of coarse particles to the basin.     

Etude d'un chondre extrait du lot 118-111 de sol lunaire de la Mer de la Fécondité

Two steps of crystallization can be identified in a Luna 16 chondrule: the first-formed silicates—mostly anorthitic plagioclase—acted as nuclei for the orthopyroxene fibers.     

The aging of gypsum in underground mines

The aging properties of gypsum extracted from two underground mines in France (Livry–Gargan and Grozon) have been highlighted by means of observation performed using scanning electron microscopy on samples taken along horizontal boreholes drilled through to the middle of several pillars. The aging process is exhibited by the presence of traces of dissolution (edges of the dissolved crystals, corroded crystalline surfaces, important intra- and intercrystalline space). These dissolution figures decrease in number and in intensity from the wall heading towards the middle of the pillar. The “older” pillars display a greater number of dissolution traces than the “more recent” pillars. Then, the role of the aging has been assessed by determining various physical and mechanical parameters on cylindrical samples of 38 mm in diameter and 76 mm in height, machined from the set of drilled boreholes. The following parameters have been quantified: density, grains density, total porosity, porosity accessible to water, intrinsic permeability to nitrogen, velocity of ultrasonic compression and shear waves, dynamic Young's modulus, dynamic Poisson's ratio, uniaxial compressive strength and static Young's modulus. Significant variations in parameter values between the wall and the middle of the pillar were recorded and recognized as being strongly correlated with the intensity of dissolution traces, and hence with gypsum aging.     

Peierls–Nabarro modelling of dislocations in diopside

The core structures of dislocations in diopside have been calculated within the Peierls model, which assumes a planar core. 1/2<110> dislocations can dissociate into two collinear partial dislocations. We show that [001] glide is very difficult in (010) and that a non-collinear dissociation of [001](100) (modelled within a Peierls–Nabarro–Galerkin approach) makes glide equally easy in (100) and {110}. A widely spread core structure corresponding to a low lattice friction has been found for [100](010) and [010](100) dislocations which is not supported by mechanical data and, together with TEM observations, suggests that another, probably non-planar core structure is possible for these dislocations.