Potential impact of climate change and reindeer density on tundra indicator species in the Barents Sea region

Climate change is expected to alter the distribution of habitats and thus the distribution of species connected with these habitats in the terrestrial Barents Sea region. It was hypothesised that wild species connected with the tundra and open-land biome may be particularly at risk as forest area expands. Fourteen species of birds were identified as useful indicators for the biodiversity dependent upon this biome. By bringing together species distribution information with the LPJ-GUESS vegetation model, and with estimates of future wild and domestic reindeer density, potential impacts on these species between the present time and 2080 were assessed. Over this period there was a net loss of open land within the current breeding range of most bird species. Grazing reindeer were modelled as increasing the amount of open land retained for nine of the tundra bird species.     

Partial integer decorrelation: optimum trade-off between variance reduction and bias amplification

Different techniques have been developed for determining carrier phase ambiguities, ranging from float approximations to the efficient solution of the integer least square problem by the LAMBDA method. The focus so far was on double-differenced measurements. Practical implementations of the LAMBDA method lead to a residual probability of wrong fixing of the order one percent. For safety critical applications, this probability had to be reduced by eight orders of magnitude, which could be achieved by linear multi-frequency code–carrier combinations. Scenarios with single or no differences include biases due to orbit errors, satellite clock offsets, as well as residual code and phase biases. For this case, a linear combination of Galileo E1 and E5 code and carrier phase measurements with a wavelength of 3.285 m and a noise level of a few centimeters is derived. This ionosphere-free combination preserves the orbit and clock errors, and suppresses the E1 code multipath by 12.6 dB. Since integer decorrelation transformations, as used in the LAMBDA method, inflate biases, the number of such transformations must be limited, and applied in a judicious order. With a Galileo type constellation, this leads to a vertical standard deviation of ca. 20 cm, while keeping the probability of wrong fixing extremely low for code biases of 10 cm, and phase biases of 0.1 cycle, combined in a worst case.     

A chromate-contaminated site in southern Switzerland – Part 1: Site characterization and the use of Cr isotopes to delineate fate and transport

The risk of groundwater contamination by chromate at a former chromite ore processing industrial site in Rivera (Switzerland) was assessed by determining subsoil Cr(VI) concentrations and tracking naturally occurring Cr(VI) reduction with Cr isotopes. Using a hot alkaline extraction procedure, a total Cr(VI) contamination of several 1000 kg was estimated. Jarosite, KFe₃((SO₄)_x(CrO₄)_1−x)₂(OH)₆, and chromatite (CaCrO₄) were identified as Cr(VI) bearing mineral phases using XRD, both limiting groundwater Cr(VI) concentrations. To track assumed Cr(VI) reduction at field scale δ⁵³Cr values of contaminated subsoil samples in addition to groundwater δ⁵³Cr data are used for the first time. The measurements showed a fractionation of groundwater δ⁵³Cr values towards positive values and subsoil δ⁵³Cr towards negative values confirming reduction of soluble Cr(VI) to insoluble Cr(III). Using a Rayleigh fractionation model, a current Cr(VI) reduction efficiency of approximately 31% along a 120 m long flow path was estimated at an average linear groundwater velocity of 3.3 m/d. Groundwater and subsoil δ⁵³Cr values were compared with a site specific Rayleigh fractionation model proposing that subsoil δ⁵³Cr values can possibly be used to track previous higher Cr(VI) reduction efficiency during the period of industrial activity. The findings strongly favor monitored natural attenuation to be part of the required site remediation measures.     

Zircon and apatite fission-track thermochronology of Late Carboniferous volcanic rocks of the NE German Basin

Zircon and apatite fission-track analyses from Late Carboniferous felsic volcanic rocks of the NE German Basin (Halle area and Friedland drilling) reveal at least two major post-emplacement thermal events. After initial cooling at ca. 300 Ma, the volcanic pile underwent a major thermal event at ca. 200 Ma that reached in most places ca. 250-280 °C and led to the new growth of clay minerals. This event is recorded in the zircon fission-track data and can be related to Jurassic-Triassic rifting in Europe. Another thermal event is recorded in the apatite samples at ca. 100 Ma. A close correlation is observed between apatite fission-track age, texture, and sample alteration. Coarse-grained samples are stronger altered and have younger fission-track ages. Hydrothermal alteration coupled with advective heating probably caused these Upper Cretaceous fission-track ages. The latter event can be related to block faulting and inversion of the European plate during the early stages of the Alpine orogeny.     

Neotectonics and recent uplift at Kamchatka and Aleutian arc junction, Kamchatka Cape area, NE Russia

The tectonic position of the Kamchatka Cape Peninsula at the junction of the active Kuril–Kamchatka and Aleutian arcs exposes the coastline of the peninsula to strong neotectonic activities. Fracture zones have variable influence on uplift of the Kamchatka Cape Peninsula. Relevant morphologic indicators of neotectonic activity are multilevel, highly uplifted marine terraces and terraces displaced along active faults. Recent uplift rates of coastal sediments are determined by remote sensing via ASTER and SRTM DEM combined with optically stimulated luminescence dating (OSL). On the Kamchatka Cape Peninsula, terraces from the same generation are mapped at different elevations by remote sensing methods. After defining different areas of uplifted terraces, four neotectonic blocks are identified. According to apatite fission track data, the mean differential exhumation rates range from 0.2 to 1.2 mm year^?1 across the blocks since Late Miocene. The OSL data presented point to significant higher uplift rates of up to 3 ± 0.5 and 4.3 ± 1 mm year^?1, which indicates an acceleration of the vertical movement along the coast of Kamchatka Cape Peninsula in Upper Pleistocene and Holocene times.     

A regional groundwater-flow model for sustainable groundwater-resource management in the south Asian megacity of Dhaka,Bangladesh

The water resources that supply most of the megacities in the world are under increased pressure because of land transformation, population growth, rapid urbanization, and climate-change impacts. Dhaka, in Bangladesh, is one of the largest of 22 growing megacities in the world, and it depends on mainly groundwater for all kinds of water needs. The regional groundwater-flow model MODFLOW-2005 was used to simulate the interaction between aquifers and rivers in steady-state and transient conditions during the period 1981–2013, to assess the impact of development and climate change on the regional groundwater resources. Detailed hydro-stratigraphic units are described according to 150 lithology logs, and a three-dimensional model of the upper 400 m of the Greater Dhaka area was constructed. The results explain how the total abstraction (2.9 million m³/d) in the Dhaka megacity, which has caused regional cones of depression, is balanced by recharge and induced river leakage. The simulated outcome shows the general trend of groundwater flow in the sedimentary Holocene aquifers under a variety of hydrogeological conditions, which will assist in the future development of a rational and sustainable management approach.

     

Geochemical evidence for melting of carbonated peridotite on Santa Maria Island, Azores

The islands of the Azores archipelago emerge from an oceanic plateau built on lithosphere increasing in age with distance from the Mid-Atlantic Ridge from 10 to 45 Ma. Here, we present the first comprehensive major and trace element and Sr–Nd–Pb isotope data from Santa Maria, the easternmost island of the archipelago, along with published data from the other Azores islands situated much closer to the Mid-Atlantic Ridge axis. We can show that the distinctively more variable and more enriched trace element ratios at Santa Maria combined with a relatively small range in Sr–Nd–Pb isotope ratios are the result of low degrees of partial melting of a common Azores mantle plume source underneath thicker lithosphere. This implies that melt extraction processes and melting dynamics may be able to better preserve the trace element mantle source variability underneath thicker lithosphere. These conclusions may apply widely for oceanic melts erupted on relatively thick lithosphere. In addition, lower Ti/Sm and K/La ratios and SiO₂ contents of Santa Maria lavas imply melting of a carbonated peridotite source. Mixing of variable portions of deep small-degree carbonated peridotite melts and shallow volatile-free garnet peridotite could explain the geochemical variability underneath Santa Maria in agreement with the volatile-rich nature of the Azores mantle source. However, Santa Maria is the Azores island where the CO₂-rich nature of the mantle source is more evident, reflecting a combination of a smaller extent of partial melting and the positioning at the edge of the tilted Azores mantle plume.     

Ice stream influence on West Greenland Ice Sheet dynamics during the Last Glacial Maximum

This paper investigates the processes governing bedrock bedform evolution in ice sheet and ice stream areas in central West Greenland, and explores the evidence for a cross‐shelf ice stream at the Last Glacial Maximum (LGM). To the east of Sisimiut the formation of streamlined bedforms with high elongation ratios and high bedform density has been controlled by geological structure and topography in slow‐flowing ice sheet areas. At the coast, the effects of regional flow convergence, caused by coastal fjord orientation, routed ice into the Sisimiut/Itilleq area where it formed an ice stream onset zone. This funnelled ice into an offshore trough (Holsteinsborg Dyb), resulting in a southwesterly regional ice flow direction and the formation of a topographically routed ice stream (Holsteinsborg Isbrae). To the south of this, striae and bedform evidence show that local valley glaciers initially flowed east to west across the coast, but were later redirected by the Itilleq Fjord ice which turned southwestward due to diffluent flow and deflection by Holsteinsborg Isbrae. Roches moutonnées in this area have low elongation ratios and high bedform density, but do not provide unequivocal support for ice streaming, as they are a product of both bedrock structure and changes in ice flow direction, rather than enhanced flow velocities. Cosmogenic surface exposure ages limit maximum ice sheet surface elevation to ca. 755–810 m above sea level in this region. Such ice thickness enabled Holsteinsborg Isbrae to reach the mid/outer continental shelf during the LGM, and to contribute to the formation of a trough mouth fan and the Outer Hellefisk moraines. Initial deglaciation across this region was driven by rising sea level and increasing air temperatures prior to the Bølling Interstadial at ca. 14.5 cal. ka BP. Between 12 and 10 cal. ka BP both increased air and ocean temperatures post the Younger Dryas, and peak sea‐level rise up to the marine limit, caused accelerated thinning and marginal retreat through calving, although dating evidence suggests ice streams remained along the inner shelf/coast boundary until at least ca. 10 cal. ka BP, their longevity maintained by increased ice thickness and ice discharge. Copyright © 2009 John Wiley & Sons, Ltd.     

Laser-ablation ICP-MS analysis of silicate and sulfide melt inclusions in an andesitic complex I: analytical approach and data evaluation

Quantitative microanalysis of entire silicate and sulfide melt inclusions by Excimer Laser-ablation inductively-coupled-plasma mass-spectrometry (LA-ICPMS) has been applied to extrusive and shallow intrusive rocks from the andesitic Farallón Negro Volcanic Complex (northwestern Argentina). Silicate melts are trapped in pyroxene, amphibole, plagioclase and quartz, and sulfide melts are trapped in amphibole. Details of the analytical approach and the quantification procedure are given and the results are evaluated to test the accuracy of the technique and the validity of the interpretation of analytical signals. Similar compositions of silicate melt inclusions trapped in truly co-precipitating minerals show that the quantification approach of melt inclusion compositions from LA-ICPMS signals through an internal standard is valid. This correspondence also shows that melt inclusions investigated in this study are not significantly influenced by the boundary layer around a growing crystal or by post-entrapment modifications. Post-entrapment diffusive re-equilibration only affected the Fe and Mg content of melt inclusions in mafic phases. Thus, melt inclusions are representative samples of the melt from which the host mineral crystallized, with regard to most major and trace elements. Sulfide melt inclusions (present as pyrrhotite with exsolution of Au and Cu in phases separated during cooling) were analyzed for their bulk Fe, Cu and Au content, and the abundance of these elements was quantified using a silicate glass as external standard. The validity of this calibration was tested by comparing electron microprobe analyses of Fe, Cu, Ni and Co in homogeneous sulfide minerals with LA-ICPMS results. Identical results within calculated uncertainty (one standard deviation of five to nine analyses, mostly between 1 and 5 wt% RSD) demonstrate that for these elements, measured element ratios are independent of the matrix using our analytical setup.Editorial responsibility: T.L. Grove     

Zur Messung der Fahrt über Grund an Bord von Schiffen

Zusammenfassung Es wird gezeigt, wie mit einem Zweikreiselsystem, das gleichzeitig die Nordrichtung und den Horizont liefert, ein Trägheits-Navigationssystem unter Verwendung von Beschleunigungsmessern und eines Rechenaggregates aufgebaut werden kann. Die Beschleunigungsmesser werden von einer kreiselstabilisierten Plattform getragen, die über Stützmotore in den drei Freiheitsgraden parallel zum Zweikreiselsystem gehalten wird.

---

On measuring a ship's speed over ground from board of ships

Summary The following paper explains how to assemble an inertial navigation system with the aid of accelerometers, a calculating unit and a two gyro system that simultaneously indicates the north direction and the horizon. The accelerometers are carried by a gyro stabilized platform that, on its part, is kept in the three degrees of freedom parallel to the two gyro system by three torques generators.

---

Sur la mesure à bord d'un bâtiment pour déterminer la vitesse par-dessus le fond de la mer

Résumé Le travail suivant expose de quelle manière on peut construire un système de navigation d'inertie en joignant des accéléromètres, un aggrégat à calculer et un système à deux gyroscopes; ce dernier fournit simultanément la direction nord et l'horizon. Une plate-forme, également stabilisée par un système à deux gyroscopes, porte les accéléromètres. Cette plate-forme se maintient à l'aide de trois génératrices du moment de couple dans les trois degrés de. liberté parallèle au système à deux gyroscopes.

---