A method to reduce the influence of ice-rafted debris on a grain size record from northern Fram Strait, Arctic Ocean

The granulometric composition of terrigenous deep-sea sediments provides information on current speed if certain frame conditions are fulfilled. These include that current transport is the only transport process. At high latitudes this type of investigation is impaired due to the influence of ice-rafted debris (IRD) which contaminates the current-sorted grain size fractions. This study presents a new method that addresses this problem by setting the ice-rafted sand in relation to the silt of both current- and ice-transported origin. Deviations from the resulting regression function are then used to determine the behaviour of the silt mean grain size as a function of current speed largely independent from IRD bias. The study is based on sediments from the Yermak Plateau, Arctic Ocean, a region influenced by IRD brought with the south-headed Transpolar Drift and by north-directed bottom currents. The IRD correction results in displaying changes of current speed at much higher clarity; climate forcing of the currents becomes more evident. For example, the 8200 year cold event shows up as a major event in the corrected record whereas it is hardly visible in the original record.     

Retention behaviour of humic substances onto mineral surfaces and consequences upon thorium (IV) mobility: case of iron oxides

The influence of humic acids (HA) on the retention of Th(IV) onto the surface of Fe oxides has been investigated. Thorium (IV) is here considered as an analogue of tetravalent radionuclides (Zr, Hf, U, Np, Pu). Hematite (α–Fe₂O₃) and gœthite (α–FeOOH) have been chosen as model phases because of their widespread presence in the earth's crust. Retention experiments were performed by batch procedure at constant ionic strength and varying pH in the range 2–10; the HA concentration varied in the range 1–100 mg l⁻¹. Compared with the former data obtained on the retention of Th(IV) with the same hematite sample free of HA, the study of a ternary system (i.e. hematite–HA–Th), clearly shows the influence of HA on the retention mechanisms of Th(IV) even in neutral to slightly alkaline medium. In particular, it is illustrated that the retention of Th(IV) onto Fe oxides closely depends upon the ratio between humic and surface (Fe oxide) sites. This ratio has to be greater than a critical value in order to impede the sorption of Th(IV).     

Can a Training Image Be a Substitute for a Random Field Model?

In most multiple-point simulation algorithms, all statistical features are provided by one or several training images (TI) that serve as a substitute for a random field model. However, because in practice the TI is always of finite size, the stochastic nature of multiple-point simulation is questionable. This issue is addressed by considering the case of a sequential simulation algorithm applied to a binary TI that is a genuine realization of an underlying random field. At each step, the algorithm uses templates containing the current target point as well as all previously simulated points. The simulation is validated by checking that all statistical features of the random field (supported by the simulation domain) are retrieved as an average over a large number of outcomes. The results are as follows. It is demonstrated that multiple-point simulation performs well whenever the TI is a complete (infinitely large) realization of a stationary, ergodic random field. As soon as the TI is restricted to a limited domain, the statistical features cannot be obtained exactly, but integral range techniques make it possible to predict how much the TI should be extended to approximate them up to a prespecified precision. Moreover, one can take advantage of extending the TI to reduce the number of disruptions in the execution of the algorithm, which arise when no conditioning template can be found in the TI.     

Mutual validation of GNSS height measurements and high-precision geometric-astronomical leveling

The method of geometric-astronomical leveling is presented as a suited technique for the validation of GNSS (Global Navigation Satellite System) heights. In geometric-astronomical leveling, the ellipsoidal height differences are obtained by combining conventional spirit leveling and astronomical leveling. Astronomical leveling with recently developed digital zenith camera systems is capable of providing the geometry of equipotential surfaces of the gravity field accurate to a few 0.1 mm per km. This is comparable to the accuracy of spirit leveling. Consequently, geometric-astronomical leveling yields accurate ellipsoidal height differences that may serve as an independent check on GNSS height measurements at local scales. A test was performed in a local geodetic network near Hanover. GPS observations were simultaneously carried out at five stations over a time span of 48 h and processed considering state-of-the-art techniques and sophisticated new approaches to reduce station-dependent errors. The comparison of GPS height differences with those from geometric-astronomical leveling shows a promising agreement of some millimeters. The experiment indicates the currently achievable accuracy level of GPS height measurements and demonstrates the practical applicability of the proposed approach for the validation of GNSS height measurements as well as the evaluation of GNSS height processing strategies.     

40Ar-39Ar dating of high pressure metamorphic micas from the Gran Paradiso area (Western Alps): Evidence against the blocking temperature concept

The⁴⁰Ar-³⁹Ar method has been applied to high pressure (HP) white micas from the Gran Paradiso crystalline massif and from the overthrust Schistes Lustrés of its western slope. Preliminary petrographic and microanalytical investigation of the phengite micas showed that their celadonite-content decreases with time (from Si_3.65 to Si_3.05), and that less foliated samples are the most suitable for the metastable persistence of the high celadonite-content of the early HP stage during subsequent metamorphic evolution.Such samples were investigated together with one where mica is a pure retrogressive product. Two groups of plateau-ages have been found: (a) 60 to 75 Ma on HP phengites and early paragonites of unretrograded HP parageneses, thus dating the early HP metamorphic stage; (b) 38–40 Ma on HP phengites (most often in slightly retrograded HP parageneses) and on the purely retrogressive mica. For the HP phengites in (b), this age is considered to reflect the end of Ar readjustement during the later lowerP and/or higherT metamorphic stage, and not their crystallization.This disparity in plateau-ages for micas sampled within the same area shows that under the sameP-T conditions some systems were open while others remained closed. This can be closely related to the mineralogical behaviour: chemically active systems are isotopically active, whereby the reverse is not necessarily true. Thus, although temperature exceeded by far the usually assumed sealing-temperature of white micas, many systems have remained unaffected during the late Eocene event. Therefore, temperature cannot be the determining parameter for the opening of a system. Chemical reactivity, starting mineralogy and, primarily, pervasive deformation and the related fluid behaviour appear to be the effective controls.This implies that thermally activated diffusion processes (volume diffusion...) cannot be geologically significant. Consequently, the blocking temperature concept which rests on the opposite assumption now appears questionable. The fact that a mica does not necessarily behave as open above its blocking temperature necessitates at least a clear distinction between opening- and sealing-temperatures.     

Relating remotely sensed forest damage data to wind data: storms Lothar (1999) and Vivian (1990) in Switzerland

This study compares the surface wind speed and forest damage data of two exceptionally severe winter storms, Vivian 1990 and Lothar 1999. The study area comprises the region that suffered damage in Switzerland. The wind speed data were derived from simulations of MeteoSwiss (Federal Office of Meteorology and Climatology), measurements during the storm periods and expert analyses of the data. The remotely sensed forest damage data were provided by the Federal Office for the Environment and the forest cover data by Swiss Federal Statistical Office. We compared data on the peak gust and maximum average wind speed, with data on the spatially related forest area and forest damage area, and found some clear differences in the correlations between the different wind data and forest damage. Our results point generally to the damage-causing role of near-surface gusts at maximum wind speeds during the storm. These tended to be spatially distributed on a fine scale. In only a few cases were the results statistically significant. However, these results could probably be improved with better wind data. For example, gust measurements spatially closer to forests or simulations of gusts at maximum wind speed could be produced with a spatially higher resolution.     

Soil erosion susceptibility assessment and validation using a geostatistical multivariate approach: a test in Southern Sicily

A certain number of studies have been carried out in recent years that aim at developing and applying a model capable of assessing water erosion of soil. Some of these have tried to quantitatively evaluate the volumes of soil loss, while others have focused their efforts on the recognition of the areas most prone to water erosion processes. This article presents the results of a research whose objective was that of evaluating water erosion susceptibility in a Sicilian watershed: the Naro river basin. A geomorphological study was carried out to recognize the water erosion landforms and define a set of parameters expressing both the intensity of hydraulic forces and the resistance of rocks/soils. The landforms were mapped and classified according to the dominant process in landsurfaces affected by diffuse or linear water erosion. A GIS layer was obtained by combining six determining factors (bedrock lithology, land use, soil texture, plan curvature, stream power index and slope-length factor) in unique conditions units. A geostatistical multivariate approach was applied by analysing the relationships between the spatial distributions of the erosion landforms and the unique condition units. Particularly, the density of eroded area for each combination of determining factors has been calculated: such function corresponds, in fact, to the conditional probability of erosion landforms to develop, under the same geoenvironmental conditions. In light of the obtained results, a general geomorphologic model for water erosion in the Naro river basin can be depicted: cultivated areas in clayey slopes, having fine-medium soil texture, are the most prone to be eroded; linear or diffuse water erosion processes dominate where the topography is favourable to a convergent or divergent runoff, respectively. For each of the two erosion process types, a susceptibility map was produced and submitted to a validation procedure based on a spatial random partition strategy. Both the success of the validation procedure of the susceptibility models and the geomorphological coherence of the relationships between factors and process that such models suggest, confirm the reliability of the method and the goodness of the predictions.     

Development of a High Magnification Enlarger

Visual interpretation forms the basis for many operational applications of remote sensing. Suitable enlargement of remotely sensed data by optical projection is a basic requirement for visual interpretation. High Magnification Enlarger (HME) is a versatile interpretation aid developed for achieving wide-ranging scale transfer and variable-magnification display from a standard 24 cm format transparency. It operates on the principle of optical projection and is configured as a vertical column mounted unit. Low-distortion, high-quality enlarging lenses coupled with accuracy of alignment ensure accurate reproduction of the scale and the finer details from the input image transparency. Maximum user convenience is achieved by motorization of various controls.