The presolar grain inventory of fine‐grained chondrule rims in the Mighei‐type (CM) chondrites

We investigated the inventory of presolar silicate, oxide, and silicon carbide (SiC) grains of fine‐grained chondrule rims in six Mighei‐type (CM) carbonaceous chondrites (Banten, Jbilet Winselwan, Maribo, Murchison, Murray and Yamato 791198), and the CM‐related carbonaceous chondrite Sutter's Mill. Sixteen O‐anomalous grains (nine silicates, six oxides) were detected, corresponding to a combined matrix‐normalized abundance of ~18 ppm, together with 21 presolar SiC grains (~42 ppm). Twelve of the O‐rich grains are enriched in ¹⁷O, and could originate from low‐mass asymptotic giant branch stars. One grain is enriched in ¹⁷O and significantly depleted in ¹⁸O, indicative of additional cool bottom processing or hot bottom burning in its stellar parent, and three grains are of likely core‐collapse supernova origin showing enhanced ¹⁸O/¹⁶O ratios relative to the solar system ratio. We find a presolar silicate/oxide ratio of 1.5, significantly lower than the ratios typically observed for chondritic meteorites. This may indicate a higher degree of aqueous alteration in the studied meteorites, or hint at a heterogeneous distribution of presolar silicates and oxides in the solar nebula. Nevertheless, the low O‐anomalous grain abundance is consistent with aqueous alteration occurring in the protosolar nebula and/or on the respective parent bodies. Six O‐rich presolar grains were studied by Auger Electron Spectroscopy, revealing two Fe‐rich silicates, one forsterite‐like Mg‐rich silicate, two Al‐oxides with spinel‐like compositions, and one Fe‐(Mg‐)oxide. Scanning electron and transmission electron microscopic investigation of a relatively large silicate grain (490 nm × 735 nm) revealed that it was crystalline åkermanite (Ca₂Mg[Si₂O₇]) or a an åkermanite‐diopside (MgCaSi₂O₆) intergrowth.     

Extracting invariant characteristics of sketch maps: Towards place query‐by‐sketch

In geography, invariant aspects of sketches are essential to study because they reflect the human perception of real‐world places. A person's perception of a place can be expressed in sketches. In this article, we quantitatively and qualitatively analyzed the characteristics of single objects and characteristics among objects in sketches and the real world to find reliable invariants that can be used to establish references/correspondences between sketch and world in a matching process. These characteristics include category, shape, name, and relative size of each object. Moreover, quantity and spatial relationships—such as topological, ordering, and location relationships—among all objects are also analyzed to assess consistency between sketched and actual places. The approach presented in this study extracts the reliable invariants for query‐by‐sketch and prioritizes their relevance for a sketch‐map matching process.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

The First Solar Seeing Profile Measurement with Two Apertures and Multiple Guide Regions

The sky brightness is a critical parameter for estimating the coronal observation conditions for a solar observatory. As part of a site-survey project in Western China, we measured the sky brightness continuously at the Lijiang Observatory in Yunnan province in 2011. A sky brightness monitor (SBM) was adopted to measure the sky brightness in a region extending from 4.5 to 7.0 apparent solar radii based on the experience of the Daniel K. Inouye Solar Telescope (DKIST) site survey. Every month, the data were collected manually for at least one week. We collected statistics of the sky brightness at four bandpasses located at 450, 530, 890, and 940 nm. The results indicate that aerosol scattering is of great importance for the diurnal variation of the sky brightness. For most of the year, the sky brightness remains under 20 millionths per airmass before local Noon. On average, the sky brightness is less than 20 millionths, which accounts for 40.41% of the total observing time on a clear day. The best observation time is from 9:00 to 13:00 (Beijing time). The Lijiang Observatory is therefore suitable for coronagraphs investigating the structures and dynamics of the corona.     

Fourier Power Spectra of Solar Noise Storms

We analyzed three noise storms recorded on 200?–?400 MHz Trieste Callisto radio spectra on 2 July 2012, 8 July 2012, and 16 July 2012 by the Fourier method. We divided intervals of the noise storms into five-minute intervals, and in these intervals we computed the mean Fourier spectra as a function of the wave numbers in the frequency and height-scale spaces. We found that these Fourier spectra, where the spectrum from the quiet-activity interval was subtracted, are power-law spectra. The mean power-law index of these spectra in the range \(\ln(k_{z}) = [1.8, 2.9]\) (where \(k_{z}\) is the wave number in the height-scale space) is \(-1.7\pm0.14\), \(-1.6\pm0.14\), and \(-1.5 \pm0.12\) for the 2 July 2012, the 8 July 2012, and the 16 July 2012 noise storms, respectively. It appears that as the number of Type-I bursts in the studied interval increases, the power-law index becomes closer to \(-5/3\); this is known as the Kolmogorov spectral index. The power-law index of the noise storms is very similar to that of the narrowband dm-spikes found in our previous studies. Furthermore, we found a break in the power spectra at \(\ln(k_{z}) \approx2.9\), and the mean power-law index values above this break are \(-2.9\pm0.46\), \(-3.1\pm0.65\), and \(-3.4\pm0.98\), respectively.     

Hydraulic roughness over simple subaqueous dunes

Detailed studies of flow over subaqueous dunes in laboratory flumes were used to suggest a virtual near-bed layer of twice the dune height in which the mean velocity is accelerated towards the crest by contraction. The mean flow velocity in this layer above the crest, transformed into friction velocity by means of the surface skin roughness, is shown to give values consistent with measured values. The resulting dimensionless shear stress due to skin friction is depth-independent, in contrast to that derived by means of often cited traditional methods. As a result of the relationship between dune height and the thickness of the near-bed layer, an expression for the expansion loss behind dunes was formulated and used to relate form resistance directly to dune height.     

Active mud volcanoes on the upper slope of the western Nile deep-sea fan—first results from the P362/2 cruise of R/V Poseidon

In February 2008, cruise P362/2 was undertaken aboard R/V Poseidon to the Giza and North Alex mud volcanoes (MVs) on the upper slope of the western Nile deep-sea fan. Emitted fluids were strongly depleted in chloride and rich in hydrocarbons, predominantly of thermogenic origin. In-situ sediment temperature measurements indicate extremely high and moderate levels of activity for the North Alex MV and Giza MV, respectively, and suggest rapid changes from dormant to active stages. Both the physical properties of core sediments (e.g., color and magnetic susceptibility), and their assemblages of micro- and nannofossils point to different sources for the two mud volcanoes. Biostratigraphic dating suggests source depths of 2,100–2,450 mbsf for the Giza MV and 1,150–1,550 mbsf for the North Alex MV. Very high temperatures of up to 70°C in shallow sediments at the North Alex MV can be explained only if the fluid source were warmer and deeper than the sediment source.     

Geochemical evidence of an extraterrestrial component in impact melt breccia from the Paleoproterozoic Dhala impact structure,India

The Paleoproterozoic Dhala structure with an estimated diameter of ~11 km is a confirmed complex impact structure located in the central Indian state of Madhya Pradesh in predominantly granitic basement (2.65 Ga), in the northwestern part of the Archean Bundelkhand craton. The target lithology is granitic in composition but includes a variety of meta‐supracrustal rock types. The impactites and target rocks are overlain by ~1.7 Ga sediments of the Dhala Group and the Vindhyan Supergroup. The area was cored in more than 70 locations and the subsurface lithology shows pseudotachylitic breccia, impact melt breccia, suevite, lithic breccias, and postimpact sediments. Despite extensive erosion, the Dhala structure is well preserved and displays nearly all the diagnostic microscopic shock metamorphic features. This study is aimed at identifying the presence of an impactor component in impact melt rock by analyzing the siderophile element concentrations and rhenium‐osmium isotopic compositions of four samples of impactites (three melt breccias and one lithic breccia) and two samples of target rock (a biotite granite and a mafic intrusive rock). The impact melt breccias are of granitic composition. In some samples, the siderophile elements and HREE enrichment observed are comparable to the target rock abundances. The Cr versus Ir concentrations indicate the probable admixture of approximately 0.3 wt.% of an extraterrestrial component to the impact melt breccia. The Re and Os abundances and the ¹⁸⁷Os/¹⁸⁸Os ratio of 0.133 of one melt breccia specimen confirm the presence of an extraterrestrial component, although the impactor type characterization still remains inconclusive.     

On the occurrence and origin of anthropogenic radionuclides found in a fragment of the Chelyabinsk (LL5) meteorite

A piece of the 2013 Chelyabinsk meteorite was investigated for its content of anthropogenic radionuclides. In addition to traces of cesium‐137 that had been previously reported for this particular fragment, we found an unusually high amount of strontium‐90, which indicates that the source of this contamination was the Kyshtym accident (1957). A high Sr‐90/Cs‐137 activity ratio is characteristic for Kyshtym‐derived contaminations. Based on the cesium‐137 content in the soil from the finding site, it is estimated that the fragment was contaminated with soil particles in the milligram range upon impact. Investigation of the soil revealed very unusual ferromagnetic characteristics and an iron‐rich chemical composition. Mössbauer spectroscopy indicated the presence of steel components in this soil, suggesting that the investigated meteorite fragment was found in an industrial dumping site rather than natural soil.     

Accretionary lapilli from the Sudbury impact event

Meteorite impact‐generated accretionary lapilli are not well studied. The recently discovered distal ejecta from the 1850 Ma Sudbury impact event contain abundant accretionary lapilli generated during the impact and deposited at great distances from the crater. We petrographically and geochemically examined lapilli from five sites (McClure, Connors Creek, Hwy 588, Pine River, and Grand Trunk Pacific, approximately 480–750 km from the center of the Sudbury structure). The compositions of quartz, K‐feldspar, calcite, biotite, and chlorite minerals are similar to each other in all of the samples, although the relative proportions of the minerals vary from site to site. The lapilli occur in a matrix of coarse‐grained quartz, carbonate, and feldspar grains. Zonation within lapilli appears to be due to grain size distribution rather than compositional variation. The inner zones are coarser grained than outer zones. The relative abundances of calcite, phyllosilicates, and feldspars are similar in each zone within individual lapilli. A meteoritic component is indicated by up to 1.8 ppb Ir in one lapillus from the Pine River site, and Ni and Cr ratios are on a chondritic trend line for many of the lapilli. Mechanisms previously proposed for accretionary lapilli formation seem inadequate to explain deposition of distal accretionary lapilli resulting from impact events. A new mechanism for upper atmospheric accretion is proposed, whereby ash ejected from impact events concentrates at altitudes of neutral buoyancy, where it then accretes and is deposited later than ballistically emplaced particles. Likely, multiple processes are taking place in the chaotic postimpact environment.