摄影测量数据库的设计与建立

摄影测量数据库主要存储和管理数字地图成果数据，包括数字高程模型数据（DEM）、数字矢量地图数据（DLG）、数字影像地图数据（DOM）和数字栅格地图数据（DRG）。本文主要介绍了摄影测量数据库的设计、建立以及应用分析等内容。     

甘薯高产栽培与气象条件浅析

甘薯喜高温强光，怕霜冻，耐旱、耐瘠不耐寒。文章就气象条件对甘薯的生长发育及高产栽培中的影响进行系列的分析，有助于提高甘薯品质，增加产量。     

非地转强迫对Fitow(0114)暴雨的影响

利用非静力中尺度模式MM5对 0 114号台风Fitow从 2 0 0 1年 8月 31日 0 0时～ 9月 2日 0 0时 (UTC ,下同 )的降水过程进行了模拟研究。结果表明 ,MM5对Fitow登陆过程中暴雨落区和强度的模拟与实况比较一致。模拟结果较好地再现了暴雨的中尺度特征。正是维持少动的台风倒槽和嵌入其中的中小尺度系统相互作用造成了暴雨的发生、发展 ,而高、低空中尺度散度场的配置对暴雨有很好的指示意义。在华南台风暴雨区无论是高层还是低层 ,都存在很强的非地转作用 ,非地转涡度项对散度倾向项是重要的强迫因素 ;但非地转作用的实现与中高纬度地区有本质的区别 ,在低层非地转作用是由于强的位势场气旋涡度 (- 2  <0 )与弱的流场气旋涡度 (fζ >0 )不平衡产生的 ;而高层非地转作用是由于强的位势场反气旋涡度 (- 2  >0 )与弱的流场反气旋涡度 (fζ <0 )不平衡产生的。非地转作用是暴雨中尺度系统上升运动发展的触发机制。从动力学角度解释了用非地转 Q矢量散度场来判断暴雨落区要比用准地转 Q矢量散度场好的原因。     

青藏高原云-辐射-加热效应和南亚夏季风--1985年与1987年对比分析

文中首先利用NCEP NCAR再分析的风场资料 ,分析了南亚夏季风的时空特征 ,选取了有代表性的典型强、弱夏季风年 ,继而利用ISCCP C2、ERBE S4卫星观测资料和NCEP NCAR再分析资料 ,对比分析了强、弱夏季风前期青藏高原地区的云—辐射—加热状况及其在海、陆差异中的作用。分析结果表明 ,南亚夏季风强或弱 ,其前期青藏高原地区的云—辐射—加热效应有明显的差异。在强 (弱 )南亚夏季风的前期 ,青藏高原大部分地区为相对少 (多 )云区 ,其云量变化不仅表明了此区的云—辐射—加热效应的不同 ,更重要的是与此同时出现的海、陆之间云量分布的“跷跷板”现象 ,进一步改变了海、陆之间的热力差异。而且 ,在强南亚夏季风年 ,这种热力差异不但开始得早 ,而且持续时间长、作用范围大 ,从而对南亚夏季风的形成和变化产生重要的影响     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

The BLAST-CODE model - A Computer-Aided Bench Blast Design and Simulation System

Blast design is a critical factor dominating fragmentation and cost of actual bench blasts. However, due to the varying nature of rock properties and geology as well as free surface conditions, reliable theoretic formulae are still unavailable at present and in most cases blast design is carried out by personal experience. As an effort to find a more scientific and reliable tool for blast design, a computer-aided bench blast design and simulation system, the BLAST-CODE model, is developed for Shuichang surface mine, Mining Industry Company of the Capital Iron and Steel Corporation Beijing. The BLAST-CODE model consists of a database representing geological and topographical conditions of the mine and the modules Frag + and Disp + for blast design and prediction of resultant fragmentation and displacement of rock mass. The two modules are established in accordance with cratering theory qualitatively and modified quantitatively by regression of the data collected from 85 bench blasting practices conducted in 3 mines of the Shuichang surface mine. Blasting parameters are selected based upon quantitative and comprehensive evaluation on the effect of the factors such as rock properties, geology, free surface conditions and detonation characteristics of the explosive products in use. In order to ensure practicality and reliability of the system, the BLAST-CODE model allows automatic adjustment to the selected parameters such as burden B and spacing S as well as explosive charge amount Q of any blasthole under irregular topographic and/or varying blastability conditions of the rock mass to be blasted. Simulation of the BLAST-CODE model includes prediction of fragmentation and displacement that are demonstrated in terms of swell factor, characteristic rock size x c and size distribution coefficient n by Rossin-Ramler's equation, and 3-dimentional muck pile profile. The BLAST-CODE model also permits interactive parameter selection based on comparison of the predicted fragmentation and displacement as well as the cost for drilling, explosives, and accessories until the most effective option can be selected.