Numerical estimation of carbonate rock properties using multiscale images

Characterizing the pore space of rock samples using three‐dimensional (3D) X‐ray computed tomography images is a crucial step in digital rock physics. Indeed, the quality of the pore network extracted has a high impact on the prediction of rock properties such as porosity, permeability and elastic moduli. In carbonate rocks, it is usually very difficult to find a single image resolution which fully captures the sample pore network because of the heterogeneities existing at different scales. Hence, to overcome this limitation a multiscale analysis of the pore space may be needed. In this paper, we present a method to estimate porosity and elastic properties of clean carbonate (without clay content) samples from 3D X‐ray microtomography images at multiple resolutions. We perform a three‐phase segmentation to separate grains, pores and unresolved porous phase using 19 μm resolution images of each core plug. Then, we use images with higher resolution (between 0.3 and 2 μm) of microplugs extracted from the core plug samples. These subsets of images are assumed to be representative of the unresolved phase. We estimate the porosity and elastic properties of each sample by extrapolating the microplug properties to the whole unresolved phase. In addition, we compute the absolute permeability using the lattice Boltzmann method on the microplug images due to the low resolution of the core plug images. In order to validate the results of the numerical simulations, we compare our results with available laboratory measurements at the core plug scale. Porosity average simulations for the eight samples agree within 13%. Permeability numerical predictions provide realistic values in the range of experimental data but with a higher relative error. Finally, elastic moduli show the highest disagreements, with simulation error values exceeding 150% for three samples.     

Multi‐dimensional analyses of the SEAM controlled source electromagnetic data—the story of a blind test of interpretation workflows

Using a subset of the SEG Advanced Modeling Program Phase I controlled‐source electromagnetic data, we apply our standard controlled‐source electromagnetic interpretation workflows to delineate a simulated hydrocarbon reservoir. Experience learned from characterizing such a complicated model offers us an opportunity to refine our workflows to achieve better interpretation quality. The exercise proceeded in a blind test style, where the interpreting geophysicists did not know the true resistivity model until the end of the project. Rather, the interpreters were provided a traditional controlled‐source electromagnetic data package, including electric field measurements, interpreted seismic horizons, and well log data. Based on petrophysical analysis, a background resistivity model was established first. Then, the interpreters started with feasibility studies to establish the recoverability of the prospect and carefully stepped through 1D, 2.5D, and 3D inversions with seismic and well log data integrated at each stage. A high‐resistivity zone is identified with 1D analysis and further characterized with 2.5D inversions. Its lateral distribution is confirmed with a 3D anisotropic inversion. The importance of integrating all available geophysical and petrophysical data to derive more accurate interpretation is demonstrated.     

A simple model accounting for the uptake,transport, and deposition of wind‐eroded mineral particles in the hyperarid coastal Atacama Desert of northern Chile

As previously observed in marine sediments collected downwind of African or South American continental sources, recent studies of sediment cores collected at the bottom of Mejillones Bay in north Chile (23°S) show a laminated structure in which the amount of particles of aeolian origin and their size create significant differences between the layers. This suggests inter‐annual to inter‐decadal variations in the strength of the local southerly winds responsible for (1) the erosion of the adjacent hyperarid surface of the Mejillones Pampa, and (2) the subsequent transport of the eroded particles towards the bay. A simple model accounting for the vertical uptake, transport, and deposition of the particles initially set into motion by wind at the surface of the pampa is proposed. This model, which could be adapted to other locations, assumes that the initial rate of (vertical) uptake is proportional to the (horizontal) saltation flux quantified by means of White's equation, that particles are lifted to a height (H), increasing with the magnitude of turbulence, and that sedimentation progressively removes the coarsest particles from the air column as it moves towards the bay. In this model, the proportionality constant (A) linking the vertical flux of particles with the horizontal flux, and the injection height (H) control the magnitude and size distribution of the deposition flux in the bay. Their values are determined using the wind speed measured over the pampa and the size distribution of particles collected in sediment traps deployed in the bay as constraints. After calibration, the model is used to assess the sensitivity of the deposition flux to the wind intensity variations. The possibility of performing such quantitative studies is necessary for interpreting precisely the variability of the aeolian material in the sediment cores collected at the bottom of Mejillones Bay. Copyright © 2010 John Wiley & Sons, Ltd.     

Theory and experimental study for sliding isolators with variable curvature

Because a conventional isolation system with constant isolation frequency is usually a long‐period dynamic system, its seismic response is likely to be amplified in earthquakes with strong long‐period wave components, such as near‐fault ground motions. Seismic isolators with variable mechanical properties may provide a promising solution to alleviate this problem. To this end, in this work sliding isolators with variable curvature (SIVC) were studied experimentally. An SIVC isolator is similar to a friction pendulum system (FPS) isolator, except that its sliding surface has variable curvature rather being spherical. As a result, the SIVC's isolation stiffness that is proportional to the curvature becomes a function of the isolator displacement. By appropriately designing the geometry of the sliding surface, the SIVC is able to possess favorable hysteretic behavior. In order to prove the applicability of the SIVC concept, several prototype SIVC isolators, whose sliding surfaces are defined by a sixth‐order polynomial function, were fabricated and tested in this study. A cyclic element test on the prototype SIVC isolators and a shaking table test on an SIVC isolated steel frame were all conducted. The results of both tests have verified that the prototype SIVC isolators do indeed have the hysteretic property of variable stiffness as prescribed by the derived formulas in this study. Moreover, it is also demonstrated that the proposed SIVC is able to effectively reduce the isolator drift in a near‐fault earthquake with strong long‐period components, as compared with that of an FPS system with the same friction coefficient. Copyright © 2011 John Wiley & Sons, Ltd.     

Distribution and source apportionments of polychlorinated biphenyls (PCBs) in mariculture sediments from the Pearl River Delta, South China

Surface and core sediments collected from six mariculture farms in the Pearl River Delta (PRD) were analyzed to evaluate contamination levels of polychlorinated biphenyls (PCBs). The ∑PCBs (37 congeners) concentrations ranged from 5.10 to 11.0 ng g(-1) (mean 7.96 ng g(-1)) in surface and 3.19 to 22.1 ng g(-1) (mean 7.75 ng g(-1)) in core sediments, respectively. The concentrations were significantly higher than that measured in the sediments of their corresponding reference sites, whereby the average enrichment percentages were 62.0% and 42.7% in surface and core sediments, respectively. Significant correlations (R2=0.77, p<0.05) of PCB homologue group proportions between fish feeds and surface mariculture sediments suggested that fish feed input was probably the main source for the enrichment of PCBs. Due to the fact that PCBs could be transferred along food chains, PCB contamination in fish feeds and mariculture sediments should not be overlooked.     

Cyclic behavior and failure mechanism of self‐centering energy dissipation braces with pre‐pressed combination disc springs

A new type of bracing system composed of friction energy dissipation devices for energy dissipation, pre‐pressed combination disc springs for self‐centering and tube members as guiding elements is developed and experimentally studied in this paper. The mechanics of this system are explained, the equations governing its hysteretic responses are outlined and large‐scale validation tests of two braces with different types of disc springs are conducted under the condition of low cyclic reversed loading. The experimental results demonstrate that the proposed bracing system exhibits a stable and repeatable flag‐shaped hysteretic response with an excellent self‐centering capability and effective energy dissipation throughout the loading protocol. Furthermore, the maximum bearing force and stiffness are predicted well by the equations governing its mechanical behavior. Fatigue and destructive test results demonstrate that the proposed bracing system can maintain stable energy dissipation and self‐centering capabilities under large deformation cyclic loading even when the tube members exceed the elastic limit and that a larger bearing capacity is achieved by the system that has disc springs without a bearing surface. Copyright © 2016 John Wiley & Sons, Ltd.     

Piping dynamics in mid‐altitude mountains under a temperate climate: Bieszczady Mountains,eastern Carpathians

Piping has been recognized as an important geomorphic, soil erosion and hydrologic process. It seems that it is far more widespread than it has often been supposed. However, our knowledge about piping dynamics and its quantification currently relies on a limited number of data for mainly loess‐derived areas and marl badlands. Therefore, this research aimed to recognize piping dynamics in mid‐altitude mountains under a temperate climate, where piping occurs in Cambisols, not previously considered as piping‐prone soils. It has been expressed by the estimation of erosion rates due to piping and elongation of pipes in the Bere?nica Wy?na catchment in the Bieszczady Mountains, eastern Carpathians (305 ha, 188 collapsed pipes). The research was based on the monitoring of selected piping systems (1971–1974, 2013–2016). Changes in soil loss vary significantly between different years (up to 27.36 t ha^?1 yr^?1), as well as between the mean short‐term erosion rate (up to 13.10 t ha^?1 yr^?1), and the long‐term (45 years) mean of 1.34 t ha^?1 yr^?1. The elongation of pipes also differs, from no changes to 36 m during one year. The mean total soil loss is 48.8 t ha^?1 in plots, whereas in the whole studied catchment it is 2.0 t ha^?1. Hence, piping is both spatially and temporally dependent. The magnitude of piping in the study area is at least three orders of magnitude higher than surface erosion rates (i.e. sheet and rill erosion) under similar land use (grasslands), and it is comparable to the magnitude of surface soil erosion on arable lands. It means that piping constitutes a significant environmental problem and, wherever it occurs, it is an important, or even the main, sediment source. Copyright © 2017 John Wiley & Sons, Ltd.     

The effect of land cover change on duration and severity of high and low flows

Land cover has been increasingly recognized as an important factor affecting hydrologic processes at the basin and regional level. Therefore, improved understanding of how land cover change affects hydrologic systems is needed for better management of water resources. The objective of this study is to investigate the effects of land cover change on the duration and severity of high and low flows by using the Soil Water Assessment Tool model, Bayesian model averaging and copulas. Two basins dominated by different land cover in the Ohio River basin are used as study area in this study. Two historic land covers from the 1950s and 1990s are considered as input to the Soil Water Assessment Tool model, thereby investigating the hydrologic high and low flow response of different land cover conditions of these two basins. The relationships between the duration and severity of both low and high flow are defined by applying the copula method; changes in the frequency of the duration and severity are investigated. The results show that land cover changes affect both the duration and severity of both high and low flows. An increase in forest area leads to a decrease in the duration and severity during both high and low flows, but its impact is highest during extreme flows. The results also show that the land cover changes have had significant influences on changes in the joint return periods of duration and severity of low and high flows. While this study sheds light on the role of land cover change on severity and duration of high and low flow conditions, more studies using various land cover conditions and climate types are required in order to draw more reliable conclusions in the future. Copyright © 2016 John Wiley & Sons, Ltd.     

Spatiotemporal estimation of snow depth using point data from snow stakes,digital terrain models,and satellite data

Snow availability in Alpine catchments plays an important role in water resources management. In this paper, we propose a method for an optimal estimation of snow depth (areal extension and thickness) in Alpine systems from point data and satellite observations by using significant explanatory variables deduced from a digital terrain model. It is intended to be a parsimonious approach that may complement physical‐based methodologies. Different techniques (multiple regression, multicriteria analysis, and kriging) are integrated to address the following issues: We identify the explanatory variables that could be helpful on the basis of a critical review of the scientific literature. We study the relationship between ground observations and explanatory variables using a systematic procedure for a complete multiple regression analysis. Multiple regression models are calibrated combining all suggested model structures and explanatory variables. We also propose an evaluation of the models (using indices to analyze the goodness of fit) and select the best approaches (models and variables) on the basis of multicriteria analysis. Estimation of the snow depth is performed with the selected regression models. The residual estimation is improved by applying kriging in cases with spatial correlation. The final estimate is obtained by combining regression and kriging results, and constraining the snow domain in accordance with satellite data. The method is illustrated using the case study of the Sierra Nevada mountain range (Southern Spain). A cross‐validation experiment has confirmed the efficiency of the proposed procedure. Finally, although it is not the scope of this work, the snow depth is used to asses a first estimation of snow water equivalent resources.