鄂尔多斯地块构造演化的古地磁学研究

鄂尔多斯地块与中朝地台其它地区相同时代地层的古地磁结果基本一致表明:晚二叠世以来,中朝地台经历了从低纬度(19°左右)向中纬度的北移过程,并伴有50°左右的逆时针旋转;晚二叠世—中三叠世地台北移10°(1000km)左右,而方位基本未变;中三叠世—中侏罗世主要发生50°左右的逆时针旋转,而北向位移不明显,这一旋转可能与杨子地台和中朝地台碰撞拼合有关,或者说是印支运动在该地区的反应,中侏罗世—早白垩世地块已基本和现代位置一致     

A possible mechanism of formation of faculae

We propose a new heating mechanism of faculae. We think that the formation of faculae is a result of the Joule dissipation of the Hall current generated by the interaction of the convection field of granules in an active region and the inter-granular magnetic field. For a region to generate effectively Hall current, its characteristic length must be such that the magnetic Reynolds number is less than 1. The equation of energy balance in the facula region is

$\text{16σT}{}^3{}_{\mathrm{p}}\text{(T}{}_{\mathrm{l}}\text{? T}{}_{\mathrm{p}}\text{)}{}^{\mathrm{n}}\text{HP}{}_{\mathrm{s}}{}^{\mathrm{a}}\text{H}{}^{\mathrm{?}}\text{=}\text{Qn}{}_{\mathrm{s}}\text{m}{}_{\mathrm{i}}\text{u}{}_{\mathrm{x}}{}^2\text{(τ}{}^2{}_{\mathrm{in}}\text{ω}{}_{\mathrm{i}}\text{)}$

.For five observational models of faculae, we calculated the corresponding velocity fields, and the results are in basic agreement with the observed fields. The present mechanism explains the dependence of the facula brightness on the magnetic and velocity fields, the apparent distribution of the faculae on the solar disk and suggest a possible interpretation of the five structures of faculae.     

悼念郭敬辉同志

我国著名的水文地理学家、中国科学院地理研究所研究员郭敬辉同志于1985年4月5日溘然长逝。他的逝世是我国地理学界和水文学界的一大损失。我们怀着十分悲痛的心情对他表示沉重悼念。     

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.     

Methane‐related microbial gypsum calcitization in stromatolites of a marine evaporative setting (Münder Formation,Upper Jurassic,Hils Syncline,north Germany)

Fossil stromatolites may reveal information about their hydrochemical palaeoenvironment, provided that assignment to a specific microbial community and a corresponding biogeochemical mechanism of formation can be made. Tithonian stromatolites of the Münder Formation at Thüste, north Germany, have traditionally been considered as formed by intertidal cyanobacterial communities. However, thin sections of the stromatolites show elongated angular traces of former gypsum crystals in a dense arrangement, but no algal or cyanobacterial filament traces. Moreover, high Fe²⁺ and Mn²⁺ contents, oxygen‐isotope and sulphur‐isotope ratios of carbonate‐bound sulphates, and sulphurized hydrocarbon biomarkers of the stromatolitic carbonate indicate that CaCO₃ precipitation occurred near the oxic–anoxic interface as a result of intensive bacterial sulphur cycling rather than photosynthetic activity. Furthermore, anaerobic oxidation of methane by Archaea may have driven CaCO₃ precipitation in deeper parts of the biofilm community, as reflected by high concentrations of squalane with a strongly negative δ¹³C in conjunction with evaporite pseudomorphs showing extremely low δ¹³C_Carb ratios. Consequently, the Thüste stromatolites are now interpreted as having initially formed by gypsum impregnation of biofilms. Subsequently, early Mg‐calcitic calcitization within the biofilms occurred because of combined bacterial iron, manganese and sulphate reduction, with an increasing contribution of anaerobic oxidation of methane with depth. This model plausibly explains the prominent preservation of signals derived from oxygen‐independent metabolic pathways, whereas virtually no geochemical record exists for an aerobic community that may, nevertheless, have prevailed at the stromatolite surface. Photic‐zone stromatolites with a prominent signal of anaerobic oxidation of methane may be common in, and indicative of, oxygen‐depleted sulphate‐bearing environments with high rates of methane production, conditions that possibly were fulfilled at the Archaean to Proterozoic transition.     

Chemical weathering of carbonates and silicates in the Han River basin,South Korea

A detailed investigation of the fluvial geochemistry of the Han River system allows to estimate the rates of chemical weathering and the consumption of CO₂. The Han River drains approximately 26,000 km² and is the largest river system in South Korea in terms of both water discharge and total river length. It consists of two major tributaries: the North Han River (NHR) and the South Han River (SHR). Distinct differences in basin lithology (silicate vs. carbonate) between the NHR and SHR provide a good natural laboratory in which to examine weathering processes and the influence of basin geology on water quality. The concentrations of major elements and the Sr isotopic compositions were obtained from 58 samples collected in both summer and winter along the Han River system in both 2000 and 2006. The concentrations of dissolved loads differed considerably between the NHR and SHR; compared with the SHR, the NHR had much lower total dissolved solids (TDS), Sr, and major ion concentrations but a higher Si concentration and ⁸⁷Sr/⁸⁶Sr ratio. A forward model showed that the dissolved loads in the NHR came primarily from silicate weathering (55 ± 11%), with a relatively small portion from carbonates (30 ± 14%), whereas the main contribution to the dissolved loads in the SHR was carbonate weathering (82 ± 3%), with only 11 ± 4% from silicates. These results are consistent with the different lithologies of the two drainage basins: silicate rocks in the NHR versus carbonate rocks in the SHR. Sulfuric acid derived from sulfide dissolution in coal-containing sedimentary strata has played an important role in carbonate weathering in the SHR basin, unlike in the NHR basin. The silicate weathering rate (SWR) was similar between the NHR and SHR basins, but the rate of CO₂ consumption in the SHR basin was lower than in the NHR basin due to an important role of sulfuric acid derived from pyrite oxidation.     

Impact of land use covers upon karst processes in a typical Fengcong depression system of Nongla, Guangxi, China

The direction and intensity of karst processes can be deeply affected by soil physical and chemical variations which were resulted from land use. Taking Nongla Fengcong depression area, Mashan County, Guangxi as an example, authors discussed the impact of land use on karst processes based on the data of field limestone tablet. The results showed that the corrosional rates at varied soil depth are quite different. Corrosional rate in woodland and orchard is mostly bigger than 20 mg/a, which is much higher than that in tilled land and shrub. Generally, corrosional rate decreased from orchard, woodland, tilled land, fallow land and shrub successively, in which soil organic matter (OM) and soil pH are two major controlling factors: corrosion process is controlled remarkably by soil OM in woodland and orchard. The higher the organic matter content is and the less the pH value is, the higher the corrosional rate is. Owing to lower organic matter content, the corrosional rate is mainly affected by soil CO₂ in tilled land and shrub.     

Comparison of arsenic concentrations in simultaneously-collected groundwater and aquifer particles from Bangladesh,India, Vietnam,and Nepal

One of the reasons the processes resulting in As release to groundwater in southern Asia remain poorly understood is the high degree of spatial variability of physical and chemical properties in shallow aquifers. In an attempt to overcome this difficulty, a simple device that collects groundwater and sediment as a slurry from precisely the same interval was developed in Bangladesh. Recently published results from Bangladesh and India relying on the needle-sampler are augmented here with new data from 37 intervals of grey aquifer material of likely Holocene age in Vietnam and Nepal. A total of 145 samples of filtered groundwater ranging in depth from 3 to 36 m that were analyzed for As (1–1000 μg/L), Fe (0.01–40 mg/L), Mn (0.2–4 mg/L) and S (0.04–14 mg/L) are compared. The P-extractable (0.01–36 mg/kg) and HCl-extractable As (0.04–36 mg/kg) content of the particulate phase was determined in the same suite of samples, in addition to Fe(II)/Fe ratios (0.2–1.0) in the acid-leachable fraction of the particulate phase. Needle-sampler data from Bangladesh indicated a relationship between dissolved As in groundwater and P-extractable As in the particulate phase that was interpreted as an indication of adsorptive equilibrium, under sufficiently reducing conditions, across 3 orders of magnitude in concentrations according to a distribution coefficient of 4 mL/g. The more recent observations from India, Vietnam and Nepal show groundwater As concentrations that are often an order of magnitude lower at a given level of P-extractable As compared to Bangladesh, even if only the subset of particularly reducing intervals characterized by leachable Fe(II)/Fe >0.5 and dissolved Fe >0.2 mg/L are considered. Without attempting to explain why As appears to be particularly mobile in reducing aquifers of Bangladesh compared to the other regions, the consequences of increasing the distribution coefficient for As between the particulate and dissolved phase to 40 mL/g for the flushing of shallow aquifers of their initial As content are explored.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.