“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.     

Asynchronous Holocene climatic change across China

A review of Holocene climatic variations in different parts of China shows that they were asynchronous. Proxy data from ice cores, pollen, loess, lacustrine sediments, and changes of sea and lake levels demonstrate that many warm and cold oscillations have occurred in China during the Holocene, including a most important climatic event known as the “Holocene optimum,” a milder and wetter period, and that the duration and amplitude of the optimum period, as well as its start and end times, differed in different parts of China. Uplift of the Tibetan plateau over the past millions of years led to the development of the monsoon climate and to complex atmospheric circulation over continental China during the Holocene. As a result, the Holocene optimum began and terminated earlier in high-altitude regions of western China than at lower elevations in eastern China, and the amplitude of the variations was lower in the east. This suggests that the western higher-altitude areas were more sensitive to climatic change than were the eastern lower-altitude areas. Holocene climatic records in the Dunde and Guliya ice cores do not correspond. Inverse δ¹⁸O variations between the two cores indicate that the effects of climate and atmospheric processes on the stable isotopes at the two sites differed. The correlation between the isotopic composition of carbonates in lake deposits in western China and climatic variations is similar to that in the ice cores. The climatic resolution in ice cores and lake sediments is higher than that in other media. The lack of precise correspondence of climatic records constructed on the basis of proxy data from different parts of China is a result of the different locations and elevations of the sampling sites, the different resolutions of the source material, and the varied climatic conditions within China. Further work is needed to confirm both the conclusions and the inferences presented here.     

塔城市一次暴雪天气的分析

2003年2月22日塔城市出现一次暴雪天气过程。文章着重分析了此次天气过程的高空环流形势、地面形势、T—Td等，指出暖湿气流是造成暴雪的主要原因。     

基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

REE and (э)Nd of clay fractions in sediments from the eastern Pacific Ocean: Evidence for clay sources

Clay fractions in the non-calcareous surface sediments from the eastern Pacific were analyzed for clay minerals, REE and 143Nd/144Nd. Montmorillonite/illite ratio (M/I ratio), total REE contents ((REE), LREE/HREE ratio and cerium anomaly (бCe) may effectively indicate the genesis of clay minerals. Clay fractions with M/I ratio >1, бCe (0.85, (REE (400 μg/g, LREE/HREE ratio (4, and REE patterns similar to those of pelagic sediments are terrigenous and autogenetic mixed clay fractions and contain more autogenetic montmorillonite. Clay fractions with M/I ratio <1, бCe=0.86 to 1.5, ΣREE=200 to 350 μg/g, LREE/HREE ratio (6 and REE distribution patterns similar to that of China loess are identified as terrigenous clay fraction. The 143Nd/144Nd ratios or (э)Nd values of clay fractions inherit the features of terrigenous sources of clay minerals. Clay fractions are divided into 4 types according to (э)Nd values. Terrigenous clay minerals of type I with the (э)Nd values of -8 to -6 originate mainly from North American fluvial deposits. Those of type II with the (э)Nd values of -9 to -7 are mainly from the East Asia and North American fluvial deposits. Those of type III with (э)Nd values of -6 to -3 could come from the central and eastern Pacific volcanic islands. Those of type IV with (э)Nd values of -13 to -12 may be from East Asia eolian. The terrigenous and autogenetic mixed clay fractions show patchy distributions, indicating that there are volcanic or hot-spot activities in the eastern Pacific plate, while the terrigenous clay fractions cover a large part of the study area, proving that the terrigenous clay minerals are dominant in the eastern Pacific.     

Soil respiration in tropical seasonal rain forest in Xishuangbanna, SW China

With the static opaque chamber and gas chromatography technique, from January 2003 to January 2004 soil respiration was investigated in a tropical seasonal rain forest in Xishuangbanna, SW China. In this study three treatments were applied, each with three replicates: A (bare soil), B (soil+litter), and C (soil+litter+seedling). The results showed that soil respiration varied seasonally, low from December 2003 to February 2004, and high from June to July 2004. The annual average values of CO2 efflux from soil respiration differed among the treatments at 1% level, with the rank of C (14642 mgCO2· m-2. h-1)＞B (12807 mgCO2· m-2. h-1)＞A (9532 mgCO2· m-2. h-1). Diurnal variation in soil respiration was not apparent due to little diurnal temperate change in Xishuangbanna. There was a parabola relationship between soil respiration and soil moisture at 1% level. Soil respiration rates were higher when soil moisture ranged from 35% to 45%. There was an exponential relationship between soil respiration and soil temperature (at a depth of 5cm in mineral soil) at 1% level. The calculated Q1o values in this study,ranging from 2.03 to 2.36, were very near to those of tropical soil reported. The CO2 efflux in 2003was 5.34 kgCO2· m-2. a-1 from soil plus litter plus seedling, of them 3.48 kgCO2· m-2. a-1 from soil (accounting for 62.5%), 1.19 kgCO2· m-2. a-1 from litter (22.3%) and 0.67 kgCO2·m-2. a-1 from seedling (12.5%).     

Delayed geochemical hazard: Concept, digital model and case study

Delayed Geochemical Hazard (DGH briefly) presents the whole process of a kind of serious ecological and environmental hazard caused by sudden reactivation and sharp release of long-term accumulated pollutant from stable species to active ones in soil or sediment system due to the change of physical-chemical conditions (such as temperature, pH, Eh, moisture, the concentrations of organic matters, etc.) or the decrease of environment capacity. The characteristics of DGH are discussed. The process of a typical DGH can be expressed as a nonlinear polynomial. The points where the derivative functions of the first and second orders of the polynomial reach zero, minimum and maximum are keys for risk assessment and harzard pridication.The process and mechanism of the hazard is due to the transform of pollutant among different species principally. The concepts of "total releasable content of pollutant", TRCP, and "total concentration of active specie", TCAS, are necessarily defined to describe the mechanism of DGH. The possibility of the temporal and spatial propagation is discussed. Case study shows that there exists a transform mechanism of "gradual release" and "chain reaction" among the species of the exchangeable and the bounds to carbonate, iron and manganese oxides and organic matter, thus causing the delayed geochemical hazard.     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

Least-squares wave-path migration

We present a new least-squares migration method called least-squares wave-path migration. The proposed method combines an iterative conjugate-gradient solver with a stationary-phase wave-path migration operator. Numerical tests demonstrate that (i) least-squares wave-path migration is computationally more efficient than and almost as accurate as Kirchhoff least-squares migration, and (ii) many of the artefacts seen in wave-path migration images are suppressed after several conjugate-gradient iterations. Previous results have shown that 3D wave-path migration is up to 100 times faster than a standard 3D Kirchhoff migration, but sometimes at the cost of reduced quality. With the proposed least-squares wave-path migration method, the image quality in wave-path migration can be improved at an acceptable increase in computational cost.     

Analysis on Bearing Capacity of Tunnel-Type Anchorage of a Long-Span Suspension Bridge

INTRODUCTION Tunnel typeanchoragehasobviousadvantages inbearingcapacityversusinvestment(LiuandHu,1996).However,itisrarelyusedinapracticalpro jectbecauseofitsrequirementofgoodrockcondi tions.Siduhebridge(Fig.1),whichliesintheBa dongmountainsinthewestplatea…