A general mixing equation with applications to Icelandic basalts

The mixing equation applied by Vollmer [1] to Pb and Sr isotope ratios is shown to be a general equation applicable to consideration of element and isotope ratios. The mixing equation is hyperbolic and has the form:Ax + Bxy + Cy + D = 0where the coefficients are dependent on the type of plot considered: i.e. ratio-ratio, ratio-element, or element-element. Careful use of this equation permits testing whether mixing is a viable process, places constraints on end member compositions, allows distinction between mixing of sources and mixing of magmas, and should allow distinction between recent mixing and long-term evolution of sources.The available chemical data for postglacial basalts from Iceland and along the Reykjanes Ridge are not consistent with either mixing of magmas or simple mixing of an enriched ocean island source with a depleted ocean ridge source. If the available analyses for basalts are representative of the source regions, the data are consistent with at least two models neither of which can be properly tested with the available data.(1) There are two separate mixing trends: one beneath Iceland with the alkali basalt source and a depleted Iceland source as end members; the second along the Reykjanes Ridge with a heterogeneous ocean ridge basalt source and a source similar to that for intermediate basalts on Iceland as end members. The depleted Iceland source and the depleted ocean ridge source are not the same.(2) The chemistry of the basalts is not determined by mixing. Instead the basalts are derived from a multiplicity of sources with a similar history which have been isolated for hundreds of millions of years.     

Geologic assessment of environmental impact in Lake Macatawa,Michigan

A historical record of the effects of human development upon Lake Macatawa is established using geologic criteria. Significant cultural events are recognized using the pollen record, particularly ambrosia/vesiculate pollen ratios, and occurrences of detrital and chemical contaminants within the more recent sedimentary column. Detrital contaminants include such things as cinder and ash from coal burning power plants and animal hair from early tanning operations. Trace metal contaminants, frequently associated with specific industrial events, are particularly useful in establishing a modern sedimentary chronology. The impact of human activity upon Lake Macatawa is measured using fossil diatoms. The advantage of this method of environmental impact assessment is that it provides a historical perspective in which changes within an environment are related to its natural conditions.     

Modelling of major elements in mantle-melt systems using trace element approaches

Major elements can be modelled in ways similar to the quantitative petrogenetic modelling used for trace elements. In contrast to modelling with trace elements, however, modelling with major elements is constrained by the stoichiometry of the solid phases. Within these constraints, the same equations for partial melting and crystallization which have been used to such advantage for trace elements may be used for major elements.Calculated MgO and FeO abundances in a mantle-melt system are used as an example of the modelling technique. Such modelling yields limited fields of permissible melts and residues for a given parent composition, but does not give the paths of melting. It does allow the temperature and extent of melting which gave rise to a melt to be determined from the MgO and FeO abundances of the melt or residual solid. Applying the results of the modelling to igneous rocks and ultramafic nodules leads to the following conclusions, which are subject to the uncertainties in the available distribution coefficients. Least differentiated basalt glasses from the ocean floor are derived from parent melts with less than 15.5 weight % MgO and 8.2 wt. % FeO. Komatiites may be derived by less than 60% melting of a pyrolite source leaving a residue of olivine and pyroxene. Many nodules from the subcontinental mantle appear to be residues of large fractions of melting (>30%) at high temperature and pressure, whereas ultramafic nodules from oceanic basalts appear to be residues of smaller fractions of melting (<30%) at lower temperatures and pressures.     

The Néel transition and magnetic properties of terrestrial,synthetic, and lunar ilmenites

The magnetic susceptibility of a terrestrial, synthetic and lunar ilmenite specimen has been measured from 4 to 300 K. All specimens had a single Néel temperature transition which ranged from 56 to 57.7 K. In one case the powdered specimen was partially aligned in the magnetic field prior to the susceptibility measurements and the Néel transition was observed to shift to 60 K indicating magnetic anisotropy. A study of several magnetic parameters calculated from the experimental data showed gross impurities in the terrestrial specimen, single-domain to multi-domain metallic iron in the synthetic specimen, and a small amount of superparamagnetic metallic iron in the lunar sample. No multidomain iron was observed in the lunar ilmenite. The results of electron spin resonance measurements were also in general agreement with these findings. Because of the absence of Fe³⁺ compared to most terrestrial samples it is suggested that the anisotropic magnetic parameters be determined on lunar ilmenite when a large enough single crystal becomes available.     

Calculating activity coefficients in hydrometallurgy — A review

Recent developments for estimating activity coefficients of electrolytes both in pure and multicomponent aqueous solutions are reviewed with good success generally attained up to saturation. Examples are presented to illustrate applications of these methods in calculating ion concentrations, vapor pressures, and solubility limits, for some problems encountered in hydrometallurgy.     

Origin of reverse-graded bedding in air-fall pumice, Coso Range, California

The origin of reverse grading in air-fall pyroclastic deposits has been ascribed to: (1) changing conditions at an erupting vent; (2) deposition in water; or (3) rolling of large clasts over smaller clasts on the surface of a steep slope. Structural features in a deposit of air-fall pumice lapilli in the Coso Range, California, indicate that reverse grading there formed by a fourth mechanism during flow of pumice. Reverse-graded beds in this deposit occur where pumice lapilli fell on slopes at or near the angle of repose and formed as parts of the blanket of accumulating pumice became unstable and flowed downslope. The process of size sorting during such flow is probably analogous to that which sorts sand grains in a reverse fashion during avalanching on the slip faces of sand dunes, attributed by Bagnold (1954a) to a grain-dispersive pressure acting on particles subjected to a shear stress. In view of the several ways in which air-fall pyroclastic debris may become reverse graded, caution is advised in interpretation of the origin of this structure both in modern and in ancient deposits.     

Earthquake recurrence on the Calaveras fault east of San Jose, California

Occurrence of small (3 M_L < 4) earthquakes on two 10-km segments of the Calaveras fault between Calaveras and Anderson reservoirs follows a simple linear pattern of elastic strain accumulation and release. The centers of these independent patches of earthquake activity are 20 km apart. Each region is characterized by a constant rate of seismic slip as computed from earthquake magnitudes, and is assumed to be an isolated locked patch on a creeping fault surface. By calculating seismic slip rates and the amount of seismic slip since the time of the last significant (M 3) earthquake, it is possible to estimate the most likely date of the next (M - 3) event on each patch. The larger the last significant event, the longer the time until the next one. The recurrence time also appears to be increased according to the moment of smaller (2 < M_L < 3) events in the interim. The anticipated times of future larger events on each patch, on the basis of preliminary location data through May 1977 and estimates of interim activity, are tabulated below with standard errors. The occurrence time for the southern zone is based on eight recurrent events since 1969, the northern zone on only three. The 95% confidence limits can be estimated as twice the standard error of the projected least-squares line. Events of M 3 should not occur in the specified zones at times outside these limits. The central region between the two zones was the locus of two events (M = 3.6, 3.3) on July 3, 1977. These events occurred prior to a window based on the three point, post-1969 slip-time line for the central region.

Latitude	Longitude	Depth	Mag.	Target date	Standard error (days)
37°17′± 2′N	121°39′±2′W	5.0 ±2 km	3.0–4.0	7-22-77	22.3
37°26′± 2′N	121°47′±2′W	6.0 ± 2 km	3.0–4.0	9-02-77	8.0

Full-size table

     

The Nazca Group of south-central Peru: Age,source, and regional volcanic and tectonic significance

The Nazca Group, exposed east of Nazca, Peru, consists of a lower part composed of conglomerate and finer-grained clastic strata and an upper part made up of at least seven ash-flow sheets (cooling units or ignimbrites), collectively known as the Nazca Tuff. These tuffs were erupted between about 22 and 18 m.y. ago from a vent area in the vicinity of Pampa Galeras now marked by a collapse caldera. The early Miocene age of the Nazca Tuff provides additional evidence for a major pulse of largely pyroclastic felsic volcanism throughout the central Andes during the early Miocene. Recognition of the Pampa Galeras caldera supports the idea that many of these rocks were erupted from vent areas of the collapse-caldera type located near the eastern margin of the Coastal batholith.The Nazca Group overlies a major erosional surface cut on the Coastal batholith and its envelope that can be traced southward to the Chilean border. This surface is a continuation of the post-Incaic erosional surface to the north, which is overlain by conglomerate and radiometrically dated volcanic rock of late Eocene age. The post-Incaic surface therefore represents a major episode of regional uplift and pedimentation that followed early Tertiary orogeny. The absence of volcanic rocks of late Eocene/early Oligocene age overlying the Coastal batholith near Nazca and in southern Peru may reflect a general absence of post-Incaic volcanism in this portion of the Andes possibly related to differences in the angle of subduction and/or restriction of volcanic and volcaniclastic rocks of this age to depositional basins east of the batholith.     

R+ bacteria in estuarine sediments

Increased construction of coastal canal communities had led to a deterioration of the water quality in the canals. In addition to being used for recreational activities, the canals serve as a dumping place for domestic sewage from these communities. This study was conducted to determine the prevalence of transferable drug-resistant (R⁺) bacteria in six coastal canals. A significantly higher number of R⁺ bacteria (both pathogenic and nonpathogenic) occurred in the bottom sediments than in the overlaying water. These sediments can be resuspended following rain, dredging, storms, boating, and diving, thus releasing their bacterial populations into the overlaying water.